EIKI EIP-110U User Manual

Download

Page 1

OWNER'S MANUAL

EK-110U EK-100W EK-101X EK-102X

Page 2

Features and Design

This Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 10.7 million colors, and matrix liquid crystal display (LCD) technology.

Simple Computer System Setting

The projector has the Multi-scan system to conform to almost all computer output signals quickly. Up to WUXGA resolution can be accepted.

Useful Functions for Presentations

The digital zoom function allows you to focus on the crucial information during a presentation.

Lamp Control

Brightness of the projection lamp can be selected.

Logo Function

The Logo function allows you to customize the screen logo.

Multilanguage Menu Display

The screen menu of the projector is available in 26 languages: English, German, French, Italian, Spanish, Polish, Swedish, Dutch, Portuguese, Japanese, Simplified Chinese, Traditional Chinese, Korean, Russian,Arabic, Turkey, Finland, Norway, Denmark, Indonesia, Hungary, Czech Republic, Kazakhstan, Vietnamese, Thai, Farsi.

Helpful Maintenance Functions

Lamp and filter maintenance functions provide for better and proper maintenance of the projector.

LAN Network Function

This projector is loaded with the wired LAN function. You can operate and manage the projector via network.( Page 53-60.)

Auto Setup Function

This function enables input source search, auto pc adjust and auto keystone by simple pressing the AUTO button on the remote control.

Colorboard Function

At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors.

Switchable Interface Terminal

The projector provides a switchable interface terminal. You can use the terminal as computer input or monitor output conveniently.

Power Management

The Power management function reduces power consumption and maintains the lamp life.

Closed Caption

This is a printed version of the program sound or other information displayed on the screen. You can turn on the feature and switch the channels.

Security Function

The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the top control or remote control. PIN code lock function prevents unauthorized use of the projector.

Note:



- The screen menu and pictures in the manual may slightly differ from the real product.

- The manual is subject to change without prior notice.

Page 3

Contents

Features and Design ..................................................... 2

Contents ........................................................................ 3

Safety Instructions ......................................................... 4

Safety Guide .................................................................. 5

Air circulation ............................................................ 6

Moving the projector ................................................. 6

Installing the projector properly ................................. 6

Compliance.................................................................... 7

Accessories ................................................................... 8

Part names and functions .............................................. 9

Front.......................................................................... 9

Back .......................................................................... 9

Bottom....................................................................... 9

Terminals ................................................................ 10

Top control and Indicators ...................................... 11

Remote control........................................................ 12

Install remote control batteries ................................ 13

Operating range ...................................................... 13

Adjustable foot ........................................................ 13

Installation ................................................................... 14

Positioning the projector ......................................... 14

Connecting to computer (Digital and

analog RGB) ........................................................ 15

Connecting to video equipment

(Video, S-Video) .................................................. 16

Connecting to audio equipment ............................. 17

Connecting to USB device

(USB-A, USB-B) .................................................. 18

Connecting the AC power cord .............................. 19

Basic operation ............................................................ 20

Turn on the projector .............................................. 20

Turn off the projector............................................... 21

Adjust zoom and focus............................................ 22

Auto setup function ................................................. 22

Keystone ................................................................. 23

Volume .................................................................... 24

Remote control operation........................................ 25

Input select.............................................................. 27

How to operate the screen menu ............................ 29

Menu bar ................................................................. 30

Display ........................................................................ 31

Auto PC adj. ............................................................ 31

Fine sync................................................................. 31

H Position................................................................ 31

V Position ................................................................ 31

H.Size ..................................................................... 31

Aspect ..................................................................... 32

Project Way............................................................. 32

Menu Position ......................................................... 33

Background Display ................................................ 33

System .................................................................... 34

Color adjust ................................................................. 35

Image Mode ............................................................ 35

Color adjust (Computer).......................................... 36

Color adjust (Video,S-video,Component) ............... 37

Setting ......................................................................38

On start ................................................................38

Standby mode ......................................................38

High land ..............................................................39

Lamp control ........................................................39

Cooling fast ..........................................................39

Closed Caption ....................................................40

Key lock ...............................................................40

Iris ........................................................................41

Terminal ...............................................................41

Sound...................................................................41

HDMI setup ..........................................................42

Expand .....................................................................43

Language .............................................................43

Auto setup ............................................................43

Keystone ..............................................................44

Logo .....................................................................46

Security ................................................................47

Power management ............................................48

Filter counter ........................................................48

Test Pattern .........................................................49

Network ................................................................49

Factory default .....................................................50

Lamp counter reset ..............................................50

Memory viewer .........................................................51

Set Slide...............................................................51

Slide transition effect............................................51

Sort Order ............................................................51

Rotate ..................................................................51

Best Fit .................................................................51

Repeat .................................................................51

Apply ....................................................................51

Information................................................................52

Network Control Instructions ....................................53

LAN control ..........................................................53

Using useful functions ..............................................61

Memory Viewer function ......................................61

USB Display function ...........................................63

Maintenance and cleaning........................................65

WARNING indicator .............................................65

Cleaning the lter .................................................66

Filter counter reset ...............................................66

Clean the projector lens .......................................67

Clean the cabinet .................................................67

Replace the lamp .................................................68

Order Replacement lamp .....................................69

Appendix...................................................................70

Troubleshooting ...................................................70

Menu Tree............................................................72

Indicator and projector state ................................76

Compatible computer specications ....................77

Technical Specications ......................................78

Congurations of terminals ..................................79

Content of hazardous substances

and elements......................................................80

Dimensions ..........................................................80

PIN code memorandum .......................................81

Page 4

Safety Instructions

0.7’(20cm)

1.5’(50cm)

3’(1m)

Please read this manual completely before installing and operating the projector. The projector provides many convenient features and functions. Proper operation may enable you to fully utilize the features and keep it in good condition. Otherwise, it will not only shorten the service life of the unit, but also may cause malfunction, a fire, or other accidents. If your projector cannot work properly, please read this manual again, check the operating methods and cable connection, and try the solutions in the part of Troubleshooting. If the problem still exists, contact the dealer or the service center. The lamp of the projector is a wearing part. The luminance may decrease after a period of operation and be weaker than that of a new lamp. This is normal. Please strictly follow the steps in Turning on the unit and Turning off the unit to turn on/off the projector, and the requirements in Maintaining and cleaning the projector to service and clean the projector regularly. Otherwise the high temperature residual heat may not radiate, greatly shorten the service life of the projector and lamp, or even damage them within a short period.

Caution

ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE USER’S MANUAL WITH THIS UNIT.

FOR EU USERS The symbol mark and recycling systems described below apply to EU countries and do not apply to countries in other areas of the world. Your product is designed and manufactured with high quality materials and components which can be recycled and/or reused. The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their end of life, should be disposed of separately from your household waste. Note: If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead In the European Union there are separate collection systems for used electrical and electronic equipment, batteries and accumulators. Please, dispose of them correctly at your local community waste collection/recycling centre. Please help us to conserve the environment we live in!

Safety precautions

Caution: ● The projector must be grounded.

● Do not expose the projector to raindrops

or high humidity to avoid a re or electric

shock.

- This projector produces intense light from the projection lens. Avoid staring directly into the lens, otherwise eye damage could be caused.

Be especially careful that children do not stare

directly into the beam.

- Place the projector in a proper position.

Otherwise it may result in re hazard.

- Leave an appropriate space from the top, sides, and back of the shell in order to ventilate and cool

down the projector. The gures below indicate the minimum distance to be left. It must be satised if

the projector is placed in sealed environment like a cabinet.

SIDE and TOP REAR

- Do not cover the vent of the projector. Poor radiation may shorten the service life or even cause dangers.

- Remove the AC power plug if the projector is not to be used for a long time.

- Do not project the same image for a long time; otherwise, a residual image may appear on the LCD panel due to its characteristic.

Caution:

Do not set the projector in greasy, wet, or smoky conditions such as in a kitchen, to prevent a malfunction or accident. If the projector comes in contact with oil or chemicals, it may become deteriorated. Read and keep this manual for future reference.

The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.

Caution:

Contains mercury

For more information on safe handling procedures, the measures to be taken in case of accidental breakage and safe disposal options visit: ec.gc.ca/mercure-mercury/ Dispose of or recycle in accordance with applicable laws.

Page 5

Safety Guide

All the safety and operating instructions should be read before the product is operated.

Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the projector.

For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.

Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the manufacturer as they may cause hazards. Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or an adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturers.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.

The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.

This projector should not be placed in a built- in installation such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a

re or electric shock. Never spill liquid of any kind on

the projector.

Do not install the projector near the ventilation duct of air-conditioning equipment.

This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.

Do not overload wall outlets and extension cords as

this can result in re or electric shock. Do not allow

anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as opening or removing Covers may expose you to dangerous voltage or other hazards. Refer all

servicing to qualied service personnel.

Unplug this projector from wall outlet and refer

servicing to qualied service personnel under the

following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often

require extensive work by a qualied technician to

restore the projector to normal operation. e. If the projector has been dropped or the cabinet has been damaged. f. When the projector exhibits a distinct change in performance-this indicates a need for service.

When replacement parts are required, be sure the service technician has used replacement parts

specied by the manufacturer that have the same

characteristics as the original part. Unauthorized

substitutions may result in re, electric shock, or injury

to persons.

Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.

Information for users in the European Union

This is a device to project images onto a screen,etc., and is not intended for use as indoor lighting in a domestic environment. Directive 2009/125/EC.

NOTE FOR CUSTOMERS IN THE US

Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL STATE OR FEDERAL LAWS.

Page 6

Safety Guide

(

M4x10

10mm

Torque:1.40N.m

Air circulation

Vents in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

Caution

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

- Do not put any ammable objects, or spray

can near the projector. Hot air is exhausted from the air vents.

- Keep the exhaust vent at least 1m away from any objects.

- Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used.

- Do not put anything on the projector. Objects put on the cabinet will not only get damaged

but also may cause re hazard by heat.

- Cooling fans are provided to cool down the projector.

- The fan’s running speed is changed according to the temperature inside the projector.

– Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For more information about transporting the projector by courier or any other transport service, consult your dealer. – Do not put the projector in a case before it is cooled enough.

Installing the projector properly

Please set the projector on nearly-level. Be sure to install the projector properly. Improper installation may reduce the lamp

lifetime and even cause a re hazard.

Do not roll the projector over 10 from side to side.

Do not pitch the projector more than 10o backward and forward.

Do not point the projector up to project an image.

Do not point the projector down to project an image.

Do not put the projector on either side to project an image.

Exhaust Vent

Air Intake Vent

Moving the projector

When moving the projector, take care of the lens and retract the adjustable feet to prevent damage to the lens and cabinet.

Caution in moving or transporting the projector

– Do not drop or bump the projector, otherwise damages or malfunctions may result. – When carrying the projector, use a suitable carrying case.

Caution in ceiling installation the projector

– Only qualied personal is authorized for ceiling

installation.

– We are not responsible for the hurt and damage

caused by ceiling bracket that purchased from unauthorized dealer even in warranty period.

– Remove the ceiling bracket immediately while

not use.

– While installing, torque screwdriver is

suggested, don't use electric or impact-type screwdriver.

– Please read the manual of bracket for details.

Page 7

Compliance

ASA

FCC Caution

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the

instructions. If such changes or modications should be made, you could be required to stop operation of

the equipment. Model Number : EK-100 series Trade Name : EIKI Responsible party : EIKI International,Inc. Address : 30251 Esperanza Rancho Santa Margarita CA 92688-2132 Telephone No. : 800-242-3454 (949-457-0200)

AC Power Cord Requirement

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.

AC Power Cord for the United Kingdom:

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted.

WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET.

The Wires in this mains lead are coloured in accordance with the following code:

Green-and-yellow ...... . . Earth

Blue ................. Neutral

Brown ............... Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

WARNING: THIS APPARATUS MUST BE EARTHED.

. If the fuse cover is detachable, never use the plug with the

or coloured green or green-and-yellow.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.

Page 8

VGA VIDEO HDMI

INPUT

FREEZE

MUTE

BLANK

LAMP

PATTERNKEYSTONE

TIMER

INFO.SCREEN

IMAGE

AUTO

+ +

- -

D.ZOOM VOLUME

VGA VIDEO HDMI

INPUT

FREEZE

MUTE

BLANK

LAMP

PATTERNKEYSTONE

TIMER

INFO.SCREEN

IMAGE

AUTO

+ +

- -

D.ZOOM VOLUME

VGA VIDEO HDMI

INPUT

FREEZE

MUTE

BLANK

LAMP

PATTERNKEYSTONE

TIMER

INFO.SCREEN

IMAGE

AUTO

+ +

- -

D.ZOOM VOLUME

VGA VIDEO HDMI

INPUT

FREEZE

MUTE

BLANK

LAMP

PATTERNKEYSTONE

TIMER

INFO.SCREEN

IMAGE

AUTO

+ +

- -

D.ZOOM VOLUME

VGA VIDEO HDMI

INPUT

FREEZE

MUTE

BLANK

LAMP

PATTERNKEYSTONE

TIMER

INFO.SCREEN

IMAGE

AUTO

+ +

- -

D.ZOOM VOLUME

Accessories

AC Power cord

Remote control with batteries

(AAA or LR3)

Safety Information

VGA cable

Quick start guide

Page 9

Part names and functions

Front

Back

Remote control receiver (front)

③

⑤

⑥

①②④

⑦

①

Lamp cover

②

Focus adjust ring

③

Top control panel and indicator

④

Filter

⑤

Projector Lens

⑥

Zoom adjust ring

⑦

AC cord connector

⑧

Speaker

⑨

Terminals

⑩

Anti-thief bar

⑪

Remote control receiver(back)

⑫

Kensington Security Slot

⑬

⑨ ⑬

⑧ ⑩ ⑪

Bottom

⑫

Adjustable foot

⑭

Exhaust vent

⑭

⑮

Caution

Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.

Page 10

Terminals

Part names and functions

① ② ③ ④ ⑤ ⑥ ⑦

⑨⑧

AUDIO OUT

①

AUDIO IN

AUDIO

OUT

R L

RS-232C

VIDEO IN

VGA IN 1 / YPbPr / S-VIDEO IN

Connect external audio amplier to this jack.

MONO(R/L)

②

For a mono audio signal (a single audio jack), connect it to MONO(R/L) jack.

VIDEO IN

③

This is the terminal to input video signals.

VGA IN 2/VGA OUT

④

- Connect a computer output to this terminal.

- Output the analog signal form ② to other monitor.

HDMI / MHL

⑤

This is the terminal to input the HDMI or MHL signals.

HDMI

⑥

This is the terminal to input HDMI signals.

USB-A

⑦

When using the "Memory Viewer" function, insert the USB memory directly to this terminal.(Refer to Page 51)

USB-B

⑧

This terminal is used to connect the projector to the computer with a USB cable when you want to use the "USB Display" function.(Refer to Page 63)

VGA IN 2 / VGA OUT

HDMI/

MHL

USB-A

HDMI

LAN

USB-B

⑬ ⑭⑫⑪⑩

LAN

⑨

- This is the LAN terminal to connect to the network.

- Connect the projector to the computer via RJ45 cable when you use the "Network" Display function.

AUDIO IN

⑩

This is the terminal to input computer audio signals.

RS-232C

⑪

When using RS232 to control the projector, please connect the serial control line to this terminal.

VGA IN 1/YCbCr/S-VIDEO IN

⑫

This is the terminal to input RGB, YCbCr or S-video signals.

Remote Control receiver(BACK)

⑬

Operation the projector by remote control.

Kensington Security Slot

⑭

This slot is for a Kensington lock used to deter theft of the projector. * Kensington is a registered trademark of

ACCO Brands Corporation

Page 11

Part names and functions

Top control and Indicators

①

Open or close the screen menu.

②▲▼◄►/UP/DOWN/VOL+/VOL-

- Select an item or adjust the value in the screen menu.

- Select the image display area in D.zoom + mode.

- Increase or decrease volume.

POWER

③

Turn on/off the projector.

WARNING indicator(Refer to Page 76)

④

- It flashes red when the internal projector

temperature is beyond the operating temperature range.

- It lights red when the power supply of the

projector is abnormal. (XGA/WXGA)

②

⑦⑥

③

⑧

POWER indicator(Refer to Page 76)

⑤

- It lights red when the projector is in stand-by mode.

- It lights green during normal operations.

- It ashes green in the Power management

mode.

- It ashes green during power

management mode.

- It ashes red during fans cooling.

- It turns steady green-yellow while the power is abnormal.(WUXGA)

AUTO

⑥

Perform various settings congured

automatically, including the "Input search" , "Auto PC adj." and "Auto keystone".

⑦

- Enter menu operation.

- Execute the selected item.

⑤

④

INPUT

⑧

Select an input source.

Page 12

Part names and functions

Remote control

①②

INPUT

③

⑥

⑧

⑩ ⑪

⑭ ⑮

⑱

⑲

POWER

①

Turn on or turn off the projector.

INPUT

②

Open or close the input source menu.

VGA

③

Select "Computer 1" as input source.

VIDEO

④

Select "Video" as input source.

HDMI

⑤

Select “HDMI” as input source.

AUTO

⑥

Enter auto setup adjust mode.

⑦

Open or close the screen menu.

VGA VIDEO HDMI

AUTO

IMAGE

LAMP

+ +

D.ZOOM VOLUME

- -

FREEZE

MUTE

BLANK

TIMER

PATTERNKEYSTONE

INFO.SCREEN

⑧



button

- Select item or adjust the value in screen menu.

- Select the image display area in

digital zoom + mode.

④

⑨

Enter the menu or select an item in

⑤

the menu.

⑦

⑨

KEYSTONE

⑩

Correct the keystone distortion.

IMAGE

⑪

Select the image mode.

⑫ ⑬

⑯ ⑰

⑳

㉑

FREEZE

⑫

Freeze the projected image.

PATTERN

⑬

Set the internal test image.

SCREEN

⑭

Select the screen size.

LAMP

⑮

Select the lamp mode.

⑯

MUTE

Turn off the volume.

⑰

INFO.

Display the projector information.

⑱

D.ZOOM + / -

Digital zoom in / zoom out the image.

⑲

VOLUME + / -

Increase /

⑳

BLANK

decrease

Temporarily close the image on the

screen.

㉑

TIMER

Enable the timer function.

the volume.

Page 13

Part names and functions

Install remote control batteries

① Open the battery cover.

To ensure safe operation, please observe the following precautions:

● Use two (2) AAA or LR3 type alkaline batteries.

● Always replace batteries in sets.

● Do not use a new battery with a used battery.

● Avoid contact with water or liquid matter.

● Do not expose the remote control to moisture or heat.

● Do not drop the remote control.

● If the battery has leaked in the remote control, carefully wipe the case clean and

install new batteries.

● Risk of explosion if two batteries are replaced by an incorrect type.

● Dispose of used batteries according to the instructions on the battery or local

regulations or guides.

Operating range

②Install new batteries.

Two AAA batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment.

Put the cover

③

back.

Point the remote control toward the remote control receivers on the projector (front and back) when pressing any button.

The maximum operating range for the remote control is about 5 meters and 60 degrees.

Adjustable foot

The projector can be adjusted up to 40 mm (10 degree) with the adjustable foot. Rotate the adjustable foot to lift the projector to a certain height. During lifting, rotate the foot clockwise. To lower or retract the adjustable foot, rotate the foot counterclockwise. Keystone distortion of projected images can be corrected by auto settings, remote control operation or menu operation.

30°

Adjustable foot

30°

Page 14

Installation

30”

(Diagonal:Inch)

Max.

Min.

(Center)

0.9m(1.0m)

3.0m(3.3m)

4.5m(5.0m)

6.1m(6.6m)

9.1m(9.9m)

10.9m(11.9m)

30”

(Diagonal:Inch)

Max.

Min.

(Center)

(Diagonal:Inch)

Max.

Min.

(Center)

0.9m(1.0m)

3.0m(3.3m)

4.5m(5.0m)

6.1m(6.6m)

9.1m(9.9m)

10.9m(11.9m)

0.9m(1.0m)

3.2m(3.3m)

4.8m(5.0m)

6.4m(6.6m)

9.6m(9.9m)

11.6m(11.9m)

30”

(Diagonal:Inch)

Max.

Min.

(Center)

(Diagonal:Inch)

Max.

Min.

(Center)

0.9m(1.0m)

3.0m(3.3m)

4.5m(5.0m)

6.1m(6.6m)

9.1m(9.9m)

10.9m(11.9m)

0.9m(1.0m)

3.2m(3.3m)

4.8m(5.0m)

6.4m(6.6m)

9.6m(9.9m)

11.6m(11.9m)

Positioning the projector



Note:

● The brightness in a room has a great inuence on picture quality. It is recommended to limit the

ambient lighting in order to get the best image.

● All measurements are approximate and may vary from the actual sizes.

XGA model:



Note: The data in "()" is the project distance for 16:9 aspect ratio.

WXGA model:



Note: The data in "()" is the project distance for 16:9 aspect ratio.

WUXGA model:



Note: The data in "()" is the project distance for 16:9 aspect ratio.

4:3

Screen size (WxH)mm 4:3 aspect ratio Maximum 0.9m 3.0m 4.5m 6.1m 9.1m

Minimum 1.1m 3.6m 5.5m 7.3m 10.9m

30" 100" 150" 200" 300"

610x457 2032x1524

3048x2286 4064x3048

6096x4572

16:9

Screen size (WxH)mm 16:9 aspect ratio Maximum 1.0m 3.3m 5.0m 6.6m 9.9m

Minimum 1.2m 4.0m 6.0m 7.9m 11.9m

30" 100" 150" 200" 300"

664x374 2214x1245

3321x1868 4428x2491

6641x3736

16:10

Screen size (WxH)mm 16:10 aspect ratio Maximum 0.9m 3.2m 4.8m 6.4m 9.6m

Minimum 1.1m 3.8m 5.8m 7.7m 11.6m

30" 100" 150" 200" 300"

646x404 2154x1346

3231x2019 4308x2692

6462x4039

16:9

Screen size (WxH)mm 16:9 aspect ratio

Maximum 1.0m 3.3m 5.0m 6.6m 9.9m

Minimum 1.2m 4.0m 6.0m 7.9m 11.9m

30" 100" 150" 200" 300"

664x374 2214x1245

3321x1868 4428x2491

6641x3736

16:10

Screen size (WxH)mm 16:10 aspect ratio Maximum 0.9m 3.0m 4.5m 6.0m 8.9m

Minimum 1.1m 3.6m 5.4m 7.1m 10.7m

30" 100" 150" 200" 300"

646x404 2154x1346

3231x2019 4308x2692

6462x4039

16:9

Screen size (WxH)mm 16:9 aspect ratio

Maximum 0.9m 3.0m 4.6m 6.1m 9.2m

Minimum 1.1m 3.7m 5.5m 7.3m 11.0m

30" 100" 150" 200" 300"

664x374 2214x1245

3321x1868 4428x2491

6641x3736

Page 15

Installation

Connecting to computer (Digital and analog RGB)

Cables used for connection:

● VGA cable ● Serial cable(crossover type)*

● HDMI cable*

(*=Cables are not supplied with the projector)

Serial cable

AUDIO

AUDIO IN

RS232 output

RS232 input

OUT

VGA cable

R L

VGA output

VGA input

VIDEO IN

RS-232C

VGA input/output

VGA cable

VGA output/input

VGA IN 2 / VGA OUT

VGA IN 1 / YPbPr / S-VIDEO IN

HDMI output

HDMI cable

HDMI input

HDMI/

MHL

USB-A

HDMI

LAN

USB-B

Unplug the power cords of both the projector and external equipment from the AC outlet

before connecting the cables.

Page 16

Installation

Connecting to video equipment (Video, S-Video)

Cables used for connection:

● S-video cable** ● Component conversion cable*

● Video cable*

(*=Cables are not supplied with the projector) (**=Dedicated cable is required and can be ordered through your dealer)

S-video output

Component output

Video output

Video cable

Video input

AUDIO

R L

OUT

AUDIO IN

RS-232C

VIDEO IN

S-video cable

S-video input

VGA IN 2 / VGA OUT

VGA IN 1 / YPbPr / S-VIDEO IN

Component conversion cable

Component input

HDMI/

MHL

USB-A

HDMI

LAN

USB-B

Unplug the power cords of both the projector and external equipment from the AC outlet

before connecting the cables.

Page 17

Installation

Connecting to audio equipment

Cables used for connection:

● Audio cable*

(*=Cables are not supplied with the projector)

External audio equipment

Audio output

Audio input

Audio cable (stereo)

Audio input

Audio cable (stereo)

Audio output

AUDIO

OUT

AUDIO IN

R L

Audio output

(R) (L)

Note: The left and right channels are combined when there is only the L(mono) is inserted.

Audio cable

(R) (L)

Audio input

HDMI/

MHL

VGA IN 2 / VGA OUT

VIDEO IN

RS-232C

VGA IN 1 / YPbPr / S-VIDEO IN

USB-A

HDMI

LAN

USB-B

Unplug the power cords of both the projector and external equipment from the AC outlet

before connecting the cables.

Page 18

Installation

Connecting to USB device (USB-A, USB-B)

Cables used for connection:

● USB-B cable*

(*=Cables are not supplied with the projector)

USB-A device

USB-A input

USB-A output

USB-B input

USB-B cable

AUDIO IN

HDMI/

MHL

AUDIO

R L

OUT

VGA IN 2 / VGA OUT

VIDEO IN

RS-232C

VGA IN 1 / YPbPr / S-VIDEO IN

USB-A

HDMI

LAN

USB-B

Unplug the power cords of both the projector and external equipment from the AC outlet

before connecting the cables.

Page 19

Installation

Connecting the AC power cord

This projector uses nominal input voltages of 100–240V AC and it automatically applies to different input voltages. It is designed to work with a single-phase power system having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning it on.

Note:

The AC outlet should be near this equipment and must be easily accessible.



Note:

For safety, unplug the AC power cord when the projector is not in use. When the projector is connected to an outlet with AC power cord, it is in stand-by mode and consumes a little electric

power.

Note on the power cord

AC power cord must meet the requirements of the country where you use the projector. Conrm the AC

plug type with the chart below and proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

Projector side

For the U.S.A. and

Canada

Ground

Connect the AC power cord (supplied) to the projector.

AC outlet side

For Continental

Europe

For the U.K.

Ground

To power cord connector on your projector.

Note:



● Using incorrect power cord may inuence the product performance, or even cause hazards like an electric shock or re. To ensure the product performance and security, please apply the cable of the

same model with the original one.

To the AC outlet. To the AC outlet.

To the AC outlet.

Page 20

Basic operation

Turn on the projector

1. Complete peripheral connections (with a computer, video,etc.) before turning on the projector.

2. Connect the projector’s AC power cord into the AC outlet. The POWER indicator turns red.

3. Press the POWER button on the top control or on the remote control. The POWER indicator becomes green and the cooling fans start to work. The preparation display appears on the screen.

4. If the projector is locked with a PIN code, a PIN code input dialog box appears. Enter the PIN code as instructed below.



Note:

● When the logo select is set to be "Off", the

logo will not be displayed on the screen.(See page 46)

Enter a PIN code

Press the OK button, press ◄► button to

select a number and press the OK button to enter it to the PIN code box, then number changes to "*", automatically move the cursor to next box. If you fixed an incorrect number, press MENU button to reset it again.

Repeat the steps to complete entering a threedigit number. After entering the three-digit number, automatically move the cursor to "Set", press the OK button then you can start to operate the projector. If you entered an incorrect "PIN code", the number (***) turn red. PIN code will be reset within one second automatically, Enter the correct PIN code all over again.

What is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting the PIN code can prevent unauthorized use of the projector. A PIN code consists of a three-digit number. Refer to the PIN code lock function in the "Expand" "Security" menu on page 47 for PIN code lock operation of the projector.

PIN Code

Set

Cancel

----- Input PIN code Back

Move Select Back

OK Esc

PIN Code

Set

Cancel

OK Esc

Move the cursor to "Set", and press "OK".

Caution on handling the PIN code If you forget your PIN code, the projector can no longer be started. Take a special care in setting a new PIN code. Write down the number in a column on page 81 of this manual and keep it properly. Should the PIN code be missing or forgotten, consult your dealer or service center.

Page 21

Basic operation

Turn off the projector

1. Press the POWER button on the top control or on the remote control, and "Power off?" appears on the screen.

2. Then, press the POWER button again in 4 seconds. The POWER indicator starts to

ash red, and the cooling fans keep running

(You can select the fan noise and running speed). Now you can unplug the AC power cord after the fans stop running. Otherwise, the service life of the projector will be affected or the projector will can not be turned on or turn on abnormal.

3 When the projector has cooled down enough to be turned on again, the POWER indicator

stops ashing.

To maintain the lamp life, once you turn the projector on, wait at least 5 minutes before turning it off.

Do not operate the projector continuously

without reset. Continuous use may result

in shortening the lamp life. Turn off the projector and let it standby for about an hour in every 24 hours.



Note:

● When the On start function is “On” , this

projector is turned on automatically by

connecting the AC power cord to an AC outlet .

● The running speed of cooling fans is changed

according to the temperature inside the projector.

● Do not put the projector in a case before it is

cooled enough.

● If the POWER indicator flashes or emits a

red light, see page 76.

● While the POWER indicator is flashing, the

lamp is being cooled down and the projector

cannot be turned on. Wait until the POWER

indicator turns red to turn on the projector again.

● The fan rotation will terminate directly if the AC power cord is unplugged immediately

after the projector is turned off.

● The projector can be turned on after the POWER indicator turns red. The waiting time

to restart will be shortened when the normal power-off processing for fan cooling is

completed, comparing with the time the AC

power cord is immediately unplugged after the power-off.

Power off ?

“Power off ? ” disappears after 4 seconds.

Page 22

Basic operation

VGA VIDEO HDMI

INPUT

AUTO

Adjust zoom and focus

Rotate the ZOOM ring to zoom in or zoom out the image.

Rotate the FOCUS ring to adjust the focus of the image.

Auto setup function

This function is available just by pressing the AUTO button on the remote control or top control. The system then automatically performs various settings in the "Expand" menu, including "Input search", "Auto PC adj." and "Auto keystone".

ZOOM ring (back)

Top control

AUTO button

Remote control

AUTO button

FOCUS ring (Front)

Page 23

VGA VIDEO HDMI

INPUT

FREEZE

PATTERNKEYSTONE

IMAGE

AUTO

Basic operation

H/V Keystone

Corner correction

Curved correction

Reset value

Keystone

If a projected image has keystone distortion, follow the steps below to manually correct the keystone distortion.

Press KEYSTONE button on the remote control. The Keystone screen will displayed, (it includes: H/V Keystone, Corner correction, Curved correction and Reset value), press



to select the item.

H/V Keystone

Adjusts when the horizontal or vertical crapezoid of the projected image is distorted.

Corner correction

Adjusts when the four corners of the projected image are distorted.

Curved correction

Adjusts when the linearity is not uniform or the vertical and horizontal lines are distorted. (This function is not avalible for EK-110U)

Reset value

Return the corrected values to the factory default values.





H/V Keystone

● The arrows are white when there is no correction.

● The arrows that are used for correction turns red.

● Press  button long time, the arrows turn red and can be adjusted quickly

● The arrows disappear at the maximum correction.

● If you press the KEYSTONE button on the remote control once again while the keystone dialog box is being displayed, the keystone

adjustment is canceled.

● The adjustable range can be limited depending

on the input signal.





Remote control



button

KEYSTONE button

Keystone screen

Page 24

VGA VIDEO HDMI

INPUT

AUTO

Basic operation

Volume

Direct operation Volume

Press the VOLUME +/- buttons on the remote control or top control to adjust the volume.

Mute

Press the MUTE button on the remote control and select "On" to turn off the audio temporarily. To restore the audio to its previous level, press the MUTE button again and select "Off" or press the VOLUME+/– buttons. Mute function is also effective for AUDIO OUT jack.

Menu operation

1 Press the MENU button to display the screen menu. Press menu icon. Press the OK button to enter the submenu entry.

button to select the "Setting"



Top control

VOLUME +/- button

Remote control

MUTE button

VOLUME +/button

Volume menu

Setting

Volume

Mute

IMAGE

LAMP

+ +

D.ZOOM VOLUME

- -

Sound

FREEZE

MUTE

BLANK

TIMER

PATTERNKEYSTONE

INFO.SCREEN

Off

2 Press

button to select "Sound" and then



press the OK button.

3 Press

button to select "Volume" or "Mute"



to adjust.

Volume

Press  to increase the volume and  to decrease the volume.

Mute

Press (On/Off).

4 Press the OK button to select.

button to switch the mute function



Page 25

Basic operation

Remote control operation

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to quickly without calling up the screen menu.

FREEZE button Press FREEZE button on the remote control, video will be paused and the audio is muted. The icon is displayed on the screen during Freeze. Press FREEZE button again, the video playback resumes and the audio is unmuted.

MUTE button Press MUTE button on the remote control to turn off the volume. Press MUTE button again or VOLUME+/- button to cancel mute function.

VOLUME +/- button Press VOLUME +/- button on the remote control to increase or decrease the volume.

Remote control

IMAGE

LAMP

VOLUME +/-

INPUT

VGA VIDEO HDMI

AUTO

IMAGE

LAMP

+ +

D.ZOOM VOLUME

- -

FREEZE

MUTE

BLANK

TIMER

FREEZE

PATTERNKEYSTONE

INFO.SCREEN

MUTE

INFO

IMAGE button Press IMAGE button on the remote control to select the image mode you want. (Dynamic / Standard / Cinema / Blackboard (Green) / Colorboard / User Image)

LAMP button Press LAMP button to select a lamp mode to change the brightness of the screen.

Normal ...Normal brightness.

ECO ...... Lower brightness, reducing the

lamp power consumption and extending the lamp life.

INFO button Press INFO button on the remote control to display the projector information.



Note: See the next page for the description of other buttons.

Page 26

VGA VIDEO HDMI

INPUT

FREEZE

MUTE

BLANK

LAMP

PATTERNKEYSTONE

TIMER

INFO.SCREEN

IMAGE

AUTO

+ +

- -

D.ZOOM VOLUME

Basic operation

BLANK button

Press BLANK button on the remote control to black out the image. To restore to normal, press the BLANK button again or press any other button.

The screen changes each time you press the button as follows:

Black out →Normal →Black out →Normal ...

TIMER button Press TIMER button. The timer display “00:00” appears on the screen and the timer starts to count time (00:00–59:59). To stop the Timer, press TIMER button. Press TIMER button again, and then the Timer display disappears.

Blank Image

Blank

“Blank” disappears after 2 seconds if there is no other button operation.

：

Timer display

SCREEN button Press SCREEN button on the remote control to select the screen size you want. (Normal / Wide / Full)

*“Full” is not available for EK-110U

D.ZOOM+ button Press D.ZOOM+ button, the on-screen menu will disappear after for a while.

Press ▲▼◄►to move the image horizontally and

vertically.

The moving is effective only when the image is larger than the size of the screen.

*D.ZOOM function does not work while Timer is ON

D.ZOOM- button Press D.ZOOM- button, the on-screen menu will disappear while the information on digital zoom appears.

*D.ZOOM function does not work while Timer is ON

To return to normal size, select “ SCREEN” button on the remote control to adjust screen size.

Remote control

SCREEN

D.ZOOM +/-

BLANK

TIMER

Page 27

Basic operation

Input select

Direct Operation Press VGA, ViIDEO or HDMI on the re mote control as input source.

Menu operation 1 Press INPUT button on the top control or remote controll to display the input select menu.

2 Press  button to select VGA 1, VGA 2,

HDMI, HDMI 2(MHL), Component, Video, S-video, Network, Memory Viewer or USB Display, then press the OK button.

VGA 1

VGA 2

HDMI

Component

When input source is from

computer connected to VGA IN 1

terminal with VGA cable, please

select "Computer 1".

When input source is from

computer connected to VGA IN 2 /

VGA OUT terminal with VGA cable,

please select "Computer 2".

When input source is from

equipment connected to HDMI

terminal with HDMI cable, please

select "HDMI".

Select it when the input source is from the video equipment connected to YPbPr terminal.

Remote control

INPUT

VGA

INPUT

VGA VIDEO HDMI

AUTO

Top control

Input select menu

VGA 1

VGA 2

HDMI

HDMI 2(MHL)

Component

Video

S-video

Network

Memory Viewer

USB Display

INPUT button

VIDEO

HDMI

Video

Select it when the video input signal is connected to VIDEO IN terminal.

Note:



- When the "Input search" function is set to "On" in the "Auto setup" function, press AUTO button, the input signal will be searched automatically.

- When VGA IN 2/VGA OUT terminal is used as VGA OUT, Computer 2 can not be selected.

Page 28

Basic operation

Remote control

S-video

Network

Memory Viewer

USB Display

Select it when the video input signal is connected to S-VIDEO IN terminal.

When input source is from network connected to LAN terminal with LAN cable, please select "Network".

When input source is from device connected to USB-A terminal, please select "Memory Viewer".

When input source is from device connected to USB-B terminal, please select "USB Display".

INPUT

VGA VIDEO HDMI

AUTO

Top control

Input select menu

VGA 1

VGA 2

HDMI

HDMI 2(MHL)

Component

Video

S-video

Network

Memory Viewer

USB Display

INPUT button

Note:



- When the "Input search" function is set to "On" in the "Auto setup" function, press AUTO button, the input signal will be searched automatically.

- When signal is in "USB Display","Memory Viewer" and "Network", FREEZE, ASPECT, IMAGE,

AUTO SETUP and SCREEN function cannot work.

- Memory Viewer function, please refer to page 61-62.

- USB Display function, please refer to page 63-64.

Page 29

VGA VIDEO HDMI

INPUT

Basic operation

How to operate the screen menu

The projector can be adjusted or set via the on-screen menu. Each main menu can be divided into several levels of submenus, and subme nus are also divided into several levels of submenus. For each adjustment and setting procedure, refer to the respective sections in this manual.

1 Press the MENU button on the remote control or top control to display the screen menu.

2 Press menu and then press the OK button to enter the submenu.

3 Press press the OK button to set or enter the submenu.

4 Press among the items. Press the OK button for corresponding operation.

5 Press top control to go back to the previous menu. Press MENU button again to exit the screen menu.

buttons to select an entry in the main



buttons to select an item, and then



buttons to adjust settings or switch



button on the remote control or



Top control



MENU button

Remote control

MENU button

Screen menu

button

OK button

AUTO

IMAGE

FREEZE



button

PATTERNKEYSTONE

Display

Auto PC adj.

Fine sync

H Position

V Position

H. Size

Aspect

Project way

Menu position

Background display

System

Normal

Front

Center

Blue

1024 x 768, 60Hz

Page 30

Menu bar

Basic operation

①

②

③

④

⑤

Main menu

Display

Auto PC adj.

Fine sync

H Position

V Position

H. Size

Aspect

Project way

Menu position

Background display

System

Sub menu

Normal

Front

Center

Blue

1024 x 768, 60Hz

⑥

Display

①

- Adjust computer parameters to match with VGA input signal format: Auto PC adj., Fine sync, H Position, V Position and H.Size.

- Aspect: Normal and Wide.

- Project way: select a project way among Front, Rear, Ceiling/Front, Ceiling/Rear, Auto ceiling/

Front and Auto ceiling/Rear.

- Menu position: set the menu's position on the screen.

- Background display: set the background display color.

- System: select a system signal format to match the input source.

Color adjust

②

- Image mode: the available image modes is Standard, Dynamic, User Image, Colorboard,

Blackboard(Green) or Cinema.

- Image color adjust: If a computer is selected as a signal source, the following image adjusting options are available: Contrast, Brightness, Color temp., White balance (R/G/B) and Sharpness. If video equipment is selected as a signal source, the following image adjusting options are available: Contrast, Brightness, Color, Tint, White balance (R/G/B) and Sharpness.

Setting

③

Congure basic operation settings of the projector: On start, Standby mode, High land, Lamp control,

Cooling fast, Closed caption, Key lock, Iris, Terminal, Sound and HDMI setup.

Expand

④

Configure expand operation settings of the projector: Language, Auto setup, Keystone, Logo, Security, Power management, Filter counter, Test Pattern, Network, Factory default and Lamp counter.

Memory viewer

⑤

Congure operation settings for Memory Viewer function:

Set Slide, Slide transition effect, Sort

order, Rotate, Best t, Repeat and Apply.

Info.

⑥

The system information of the projector.

Page 31

Display

Auto PC adj.

Auto PC Adjustment function is provided to automatically adjust Fine sync, Horizontal, Vertical and H.Size to conform to your computer.

Menu operation

Auto PC adj.

1. Press MENU button on the remote control or top control to display screen menu. Press  button to select "Display", then press the OK button.

2. Press  button to select "Auto PC adj.", then press the OK button. "Please wait" will be displayed on the screen, the Auto PC adj. function will be executed.

Auto PC adj. Menu

Display

Auto PC adj.

Fine sync

H Position

V Position

H. Size

Aspect

Project way

Menu position

Background display

System

Normal

Front

Center

Blue

1024 x 768, 60Hz

Fine sync

You can cut off icker from the image displayed

by pressing  to adjust the value.(from 0 to

31).

H Position

Press  to adjust the horizontal image position.

V Position

Press  to adjust the vertical image position.

H.Size

This function is used to adjust and minimize the effect of interference caused by projection of patterns consisting of vertical stripes. The projection of the vertical striped pattern may cause cyclic patterns (noise). Adjust to minimize the amount of interference.(From -15 to +15). H.Size must be set before adjust Fine sync.

√ Note: The adjustment of Fine sync, H Position, V Position and H.Size is only for computer

signal input.

Note:



- The projector executes the Auto PC adj.

automatically when the computer signals input

the projector for the rst time.

- Automatic adjustment may not work depending

on the model of the computer and the input signal.

- The Auto PC adj. cannot be operated when

480i, 576i, 480p, 576p, 720p 1080i or 1080p is

selected in the "Display" menu → "System", or when the signal is coming from the HDMI

terminal.

Page 32

Display

Aspect

You can set a screen size to t the image while

maintaining the aspect ratio of the input signal.

1. Press  to select "Aspect" and then press the OK button.

2. Press  button to select the item, then press the OK button.

Normal

Projects the image at the maximum size while maintaining the aspect ratio of the input signal.

Wide

Projects the image at 16:9 aspect ratio.

Full

To provide an image to t the screen.

*“Full” is not available for EK-110U

Project Way

This function is used to set the project way. 1 Press MENU button on the remote control to display screen menu. Press  button to select "Display", then press the OK button. 2 Press button to select "Project way", press the OK button. 3 Press button to select the item you want to set, press the OK button.

Front

Projects to front screen when projector is front standing.

Rear

Projects to rear screen when projector is front standing.

Ceiling/Front

Projects to front screen when projector is in ceiling state.

Ceiling/Rear

Projects to rear screen when projector is in ceiling state.

Auto ceiling/Front

Projects to front screen and modify as front standing or ceiling automatically.

Auto ceiling/Rear

Projects to rear screen and modify as front standing or ceiling automatically.

Aspect menu

Display

Auto PC adj.

Fine sync

H Position

V Position

H. Size

Aspect

Project way

Menu position

Background display

System

Project way menu

Display

Auto PC adj.

Fine sync

H Position

V Position

H. Size

Aspect

Project way

Menu position

Background display

System

Normal

Front

Center

Blue

1024 x 768, 60Hz

Normal

Front

Center

Blue

1024 x 768, 60Hz

Page 33

Display

Menu Position

This function is used to change the position of screen menu. 1 Press MENU button on the remote control to display screen menu. Press  button to select "Display", then press the OK button. 2 Press button to select "Menu position", press the OK button. 3 Press button to select the item you want to set, press the OK button.

Upper left

Menu locates on upper left of the screen.

Upper right

Menu locates on upper right of the screen.

Center

Menu locates at the center of the screen.

Lower left

Menu locates on lower left of the screen.

Lower right

Menu locates on lower right of the screen.

Background Display

This function is used to select the screen background of the projector when there is no signal detected. 1 Press MENU button on the remote control or top control to display screen menu. Press  button to select "Display", then press the OK button. 2 Press  button to select "Background display", press the OK button. 3 Press  button to select the item you want to set, press the OK button.

Black .... Select black background.

Blue ...... Select blue background.

Menu position

Display

Auto PC adj.

Fine sync

H Position

V Position

H. Size

Aspect

Project way

Menu position

Background display

System

Background display

Display

Auto PC adj.

Fine sync

H Position

V Position

H. Size

Aspect

Project way

Menu position

Background display

System

Normal

Center

1024 x 768, 60Hz

Normal

Front

Center

Blue

1024 x 768, 60Hz

Front

Blue

Page 34

Display

System

Computer system select

The projector automatically tunes to various types of computers with its function of Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically detects the signal format and tunes to project proper images without any additional setting.

One of the following messages may appear:

Auto

When the projector cannot recognize the connected signal conforming to the provided computer system, Auto is displayed on the System menu box and the Auto PC Adj. function works to display proper images. If the image is not projected properly, a manual adjustment is required.

There is no signal input from computer.

-----

Check the connection between your computer and projector.

Select computer system manually

The system can also be selected manually. 1 Press MENU button on the remote control or

on top control to display the screen menu.

Press  button to select the "Display" icon, and press the OK button.

2 Press  button to select "System" and

press the OK button.

3 Press  button to select your required

system, and then press the OK button.

Note:



When HDMI, Network, Memory Viewer, USB

Display is selected, System menu for computer is disable.

System menu

Display

Auto PC adj.

Fine sync

H Position

V Position

H. Size

Aspect

Project way

Menu position

Background display

System

System for computer signal

Display

System

1024 x 768, 60Hz

----

Normal

Front

Center

Blue

1024 x 768, 60Hz

Video or S-video

Auto

The projector automatically detects an incoming video system,and adjusts itself to optimize its performance. When Video System is PAL-M, PAL-N or PAL60, select the system manually.

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N/ PAL60

If the projector cannot reproduce proper video

images, select a specic broadcast signal format

from PAL, SECAM, NTSC, NTSC 4.43, PAL-M, PAL-N and PAL60.

System for Video or S-video signal

Display

System

AUTO

PAL

SECAM

NTSC

NTSC4.43

PAL-M

PAL-N

PAL60

Page 35

VGA VIDEO HDMI

INPUT

AUTO

Color adjust

Color adjust menu is used to set the image mode and adjust the image.

1 Press MENU button on the remote control

or top control to display screen menu. Press  button to select "Color adjust", then press the OK button.

2 Press button to select the item you want

to set, press the OK button.

3 Press button to adjust the item, then

press the OK button.

Image Mode

Direct operation

Press IMAGE button on the remote control to select the image mode.

Menu operation

1 Press MENU button on the remote control or

top control to display screen menu. Press  button to select "Color adjust" menu, then press the OK button.

2 Press button to select "Image mode",

press the OK button.

3 Press button to select the item you want

to set, press the OK button.

Dynamic

The light output is maximized for use in bright areas.

Remote control

IMAGE

LAMP

Image mode (Computer)

Color adjust

Image mode

Contrast

Brightness

Color temp.

Red

Green

Blue

Sharpness

FREEZE

MUTE

PATTERNKEYSTONE

INFO.SCREEN

button

Standard

Mid

IMAGE

Standard

The picture becomes suitable for moving images in general.

Cinema

For watching movies with multiple gray scale levels.

Blackboard (Green)

For viewing the image projected on a blackboard (green) by enhancing the image quality. This is mainly effective on a green colored board instead of a black colored board.

Colorboard

For images projected onto a red, blue, yellow, or green wallpaper.

User Image

Image quality preset by the user in the Image adjustment menu.

Page 36

Color adjust

Color adjust (Computer)

1 Press MENU button on the remote control or top control to display screen menu. Press  button to select "Color adjust", then press the OK button. 2 Press button to select the item you want to set, press the OK button. 3 Press button to adjust the data.

Contrast

Press  to decrease the contrast and  to increase it.

Brightness

Press  to decrease the brightness and  to increase it.

Color temp.

Press to select color temperature.( Low, Mid and High )

Red (White balance)

Press  to lighten the red tone and  to deepen it.

Green (White balance)

Press  to lighten the green tone and  to deepen it.

Color adjust (Computer)

Color adjust

Image mode

Contrast

Brightness

Color temp.

Red

Green

Blue

Sharpness

Standard

Mid

Blue (White balance)

Press  to lighten the blue tone and  to deepen it.

Sharpness

Press  to decrease the sharpness of the image and  to increase it.

Page 37

Color adjust

Color adjust (Video,S-video,Component)

Contrast

Press  to decrease the contrast and  to increase it.

Brightness

Press  to decrease the brightness and  to increase it.

Color

Press  to decrease the chroma and  to increase it.

Tint

Press  to select the appropriate tone for the image.

Red (White balance)

Press  to lighten the red tone and  to deepen it.

Green (White balance)

Press  to lighten the green tone and  to deepen it.

Color adjust (Video,S-video, Component)

Color adjust

Image mode

Contrast

Brightness

Color

Tint

Red

Green

Blue

Sharpness

Standard

Blue (White balance)

Press  to lighten the blue tone and  to deepen it.

Sharpness

Press  to decrease the sharpness of an image and  to increase it.

√ Note:

- Signal input "Video", "S-video" or "Component",

"Tint" is in grey, it is disable.

- If you only adjust projector to "Video", "S-video" or "Component" , "Sharpness" is disable.

Page 38

Setting

On start

Standby mode

High land

Lamp control

Cooling fast

Closed caption

Key lock

Iris

Terminal

Sound

HDMI Setup

Off

Eco

Off

Normal

Off

Computer 2

Setting

On start

Standby mode

High land

Lamp control

Cooling fast

Closed caption

Key lock

Iris

Terminal

Sound

HDMI Setup

Off

Eco

Off

Normal

Off

Computer 2

Setting

On start

Standby mode

High land

Lamp control

Cooling fast

Closed caption

Key lock

Iris

Terminal

Sound

HDMI Setup

Off

Eco

Off

Normal

Off

Computer 2

The projector has "Setting" menu that allows you to set the other various functions described as follows.

1 Press MENU button on the remote control or top control to display screen menu. Press  button to select "Setting", then press the OK button. 2 Press button to select the item you want to set, press the OK button. 3 Press button to adjust the item, then press the OK button.

Setting menu

On start

Enable the projector to be turned on automatically just by connecting the AC power cord to an outlet when this function is set to On.

Start the projection immediately, enter countdown display.

Off

Start up in the standby mode.

Standby mode

This function is available when operating the projector via network. Press button to select the item below:

Eco.

Restrict some functions in the standby mode to reduce power consumption. In this case, you cannot use network functions and some RS-232C commands.

Normal

Do not restrict network function and serial communication function even in the standby mode.

Note:



The projector will start up via the “Wake on LAN” tool in Normal Standby mode.

The software and its manual can be dowloaded

from EIKI website.(for EK-110U only) URL: http://www.eiki.com

On start

Standby mode

Page 39

Setting

On start

Standby mode

High land

Lamp control

Cooling fast

Closed caption

Key lock

Iris

Terminal

Sound

HDMI Setup

Off

Eco

Off

Normal

Off

Computer 2

Setting

On start

Standby mode

High land

Lamp control

Cooling fast

Closed caption

Key lock

Iris

Terminal

Sound

HDMI Setup

Off

Eco

Off

Normal

Off

Computer 2

Setting

On start

Standby mode

High land

Lamp control

Cooling fast

Closed caption

Key lock

Iris

Terminal

Sound

HDMI Setup

Off

Eco

Off

Normal

Off

Computer 2

High land

Enable to control the fan through the Setting menu. You can select the running speed of the fan according to the altitude of the location where the projector is installed.

Off

Normal speed. Set it so if the projector is operated at a lower altitude.

Faster than Off. Set it so if the projector is operated at a higher altitude as fans will produce weaker effects.

Note:



Please set High land "On" when operating the

projector higher than 1400 meters.

Lamp control

Change the brightness of the screen.

Normal .... Normal brightness.

Eco .......... Lower brightness, reducing

power consumption and extending the lamp life.

High land

Lamp control

Cooling fast

This function provides the following options in the cooling fans' operation after turning off the projector.

Normal (90 sec)

Normal cooling speed.

60 sec

Faster and lounder than Normal, cooling time is shorter.

0 sec

Enable you directly unplug the AC power cord after turning off the projector, no need waiting for cooling.

Note:



When it is set to "0 sec", you cannot restart the projector immediately after the power-off. The lamp remains high temperature and needs to be cooled, so it takes longer time than

usual for the lamp to light up again.

Cooling fast

Page 40

Setting

On start

Standby mode

High land

Lamp control

Cooling fast

Closed caption

Key lock

Iris

Terminal

Sound

HDMI Setup

Off

Eco

Off

Normal

Off

Computer 2

Closed Caption

Allows the subtitle to be displayed for the audio contents or other information. If the input source contains closed caption, you can enable this function and change the channel. Press

to select Off, CC1, CC2, CC3 or CC4.



Note:



- The icon of Closed Caption is displayed in

grey when it is disable.

- Closed caption is disable when screen menu

or Timer displayed on screen.

Key lock

This function allows you to use the Key lock to set the security for the projector operation. Select "Key lock" and press the OK button, then press  button to select the item you want.

Off ............... Unlock.

Projector

Lock the operation of the top control. To unlock, use the remote control.

Setting

Closed Caption

Key lock

Setting

On start

Standby mode

High land

Lamp control

Cooling fast

Closed caption

Key lock

Iris

Terminal

Sound

HDMI Setup

Normal

Computer 2

Eco

Off

Remote Control

Lock the operation of the remote control. To unlock, use the top control.

If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center.

Page 41

Setting

Sound

Volume

Mute

Off

Iris

This function is used to increase the contrast of the image.

On .... Enable Iris function, increase the

contrast of the image.

Off .... Disable Iris function.

Terminal

The VGA IN 2/VGA OUT terminal can be used

as computer input or monitor output. Press▲

to select input or output.

Computer 2 ...... Computer 2 input.

Monitor out ....... Monitor out.

Iris

Terminal

Setting

On start

Standby mode

High land

Lamp control

Cooling fast

Closed caption

Key lock

Iris

Terminal

Sound

HDMI Setup

Setting

On start

Standby mode

High land

Lamp control

Cooling fast

Closed caption

Key lock

Iris

Terminal

Sound

HDMI Setup

Eco

Normal

Computer 2

Eco

Normal

Computer 2

Off

Sound

This item is used to adjust the volume.

Sound

Press  button to increase the volume, press

 button to decrease the volume. (0~25)

Mute Press ▲ button to switch mute

Off)

function. (On/

Sound

Page 42

Setting

HDMI setup

When the external equipment is connected to "HDMI" terminal, if the image is not projected properly, please switch the settings of "Image" or "Sound" in "HDMI setup" menu.

1 Press the MENU button to display the screen menu. Press  button to select the "Setting" menu icon. Press the OK to enter the submenu entry. 2 Press  button to select "HDMI setup" and then press the OK button. 3 Press  button to select "Image" or "Sound" to adjust. 4 Press  button to switch the item.

Image

64-940 ....... Select when the HDMI terminal

of an external device (such as a blu- ray player) is connected to the" HDMI" terminal.

0-1023 ...... Select when the DVI-D terminal

output of an external device (such as a computer) is connected to the "HDMI" terminal via a conversion cable or similar cable. Select also when the HDMI terminal output of a computer or other device is connected to the "HDMI" terminal.

Note:



The optimal setting varies depending on the output setting of the connected external

device. Refer to the operation instruction of

the external device regarding the output of the external device.

Setting

On start

Standby mode

High land

Lamp control

Cooling fast

Closed caption

Key lock

Iris

Terminal

Sound

HDMI Setup

Off

Eco

Off

Normal

Off

Computer 2

Sound

HDMI .......... Select when the HDMI cable is

connected, the image and audio are transmitted, and you do not need to connect the audio signal separately. Computer ... Select when the DVI-D terminal output of an external device (such as a computer) is connected to the "HDMI" terminal via a conversion cable or similar cable. The sound will not be transmitted, the audio signal is input to "AUDIO IN" terminal.

Page 43

Expand

Expend

Language

Auto setup

Keystone

Logo

Security

Power management

Filter counter

Test pattern

Network

Factory default

Lamp counter

Expend

Language

Auto setup

Keystone

Logo

Security

Power management

Filter counter

Test pattern

Network

Factory default

Lamp counter

The projector has Expand menu that allows you to set the other various expand functions described as follows.

1 Press MENU button on the remote control to display screen menu. Press  button to select "Expand", then press the OK button. 2 Press  button to select the item you want to set, press the OK button. 3 Press  button to adjust the item, then press the OK button.

Language

This projector provides multi-language screen menu.

You can press button to select the language you want.

26 languages: English, German, French, Italian, Spanish, Polish, Swedish, Dutch, Portuguese, Japanese, Simplified Chinese, Traditional Chinese, Korean, Russian,Arabic, Turkey, Finland, Norway, Denmark, Indonesia, Hungary, Czech Republic, Kazakhstan, Vietnamese, Thai, Farsi.

Auto setup

Press AUTO button on the remote control to execute "Input search", "Auto PC adj." and "Auto keystone" functions.

Input search

Allows you to automatically detect input signals. It stops when a signal is found. Press

button to select an option below:



On ........ Enabled. This function is used to

detect input signals automatically

and stops when nding a signal.

Off ........ Disabled.

Auto PC adj.

On ........ Press the AUTO button on the

remote control or top control to enable Auto PC adj. function automatically.

Off ........ Cancel Auto PC adj. function.

Auto keystone

Auto ..... When detecting the projector is

tilted, correct the vertical keystone in real time.

Manual ........ When pressing AUTO button on

the remote control or top control, perform a vertical keystone.

Off ........ Disabled.

Expand menu

Auto setup

Note:



- "Input search", "Auto PC Adj." and "Auto Keystone" cannot be set to "Off" at the same time. At least one of them is set to "On".

- Sometimes the auto keystone maybe correct image imperfectly, manual keystone is required.

- The Auto keystone function cannot work when "Display" → "Project way" is set to "Ceiling/ Front" or "Ceiling/Rear".

Page 44

Expand

Expend

Keystone

H/V Keystone

Corner correction

Curved correction

Reset value

Store

Keystone

This function is used to store or reset the keystone correction when the AC power cord is unplugged.

1 Press MENU button on the remote control to display screen menu. Press  button to select "Expand", then press the OK button. 2 Press button to select "Keystone", press the OK button. 3 Press button to select the item you want to set, press the OK button.

Keystone

Sets whether or not to keep the keystone correction after turn off the projector or plug out the power cord.

Store ..... The keystone correction will be kept when plug out the power cord or turn off the

projector.

Reset .... When "Standby mode" is set to "Eco", plug out the power cord or turn off the projector,

the keystone correction will be canceled. When "Standby mode" is set to "Normal", plug out the power cord, the keystone correction will be canceled; turn off the projector, the keystone correction will be kept.

H/V Keystone

Adjust when the horizontal or vertical trapezoid of the projected image is distorted.

Reduce the upper width with  button.

Reduce the lower width with  button.

Keystone menu

Reduce the left width with  button.

Reduce the right width with  button.

Corner correction

Adjust when the four corners of the projected image are distorted.

Press▲▼◄►to adjust the item.

Corner correction

Upper left Upper right Lower left Lower right

Note:



● The white arrows indicate that there is no correction.

● A red arrow indicates the direction of correction.

● An arrow disappears at the maximum correction.

Page 45

Expand

Curved correction (This function is not available for EK-110U)

Adjust when the linearity is not uniform or the vertical and horizontal lines are distorted.

Press▲▼◄►to adjust the item.

Items Operation Adjustment Adjustment range

Press the►button

Barrel correction X/Y Gain

Barrel

Press the◄button

Press the▲button

Press the▼button

Press the►button

correction X Offset

Barrel

Press the◄button

Press the▲button

Correction Y Offset

Note:



● Either "H/V Keystone" , "Corner correction" or "Curved correction" setting value is valid. When the "H/V Keystone" , "Corner correction" or "Curved correction" adjustment is finished, the

adjusted value will be reset when you adjust the other one.

● The "Curved Correction X Offset" and the "Curved Correction Y Offset" can not be adjusted independently. After adjusting the "Curved Correction X/Y Gain" at the beginning, please adjust the "Curved Correction X Offset" and "Curved Correction Y Offset".

● Press the KEYSTONE button on the remote control when the keystone screen is displaying (it

includes: H/V Keystone, Corner correction, Curved correction and Reset value), press  button switch to the other adjustment screen.

● Correcting up to ±30° for the tilt in the vertical direction and ±15° for the tilt in the horizontal direction are available for adjustments with "Keystone". However, the image quality will degrade and it will get harder to focus with more correction. Install the projector so that the correction will

be as small as possible.

● Screen size will also change when "H/V Keystone" is used to perform various adjustments.

● Aspect ratio of the image size may shift depending on the correction.

Press the▼button

Adjust the right of

the width

Adjust the left of

the width

Adjust the top of

the width

Adjust the bottom

of the width

Adjust the right of

the distortion

Adjust the left of

the distortion

Adjust the top of

the distortion

Adjust the bottom

of the distortion

-40 ~ +40

0 ~ +1365

0 ~ +799

Reset value

Return the corrected values to the factory default values.

Press▲▼to select "Reset value", then press the OK button, the state of the keystone correction is

released.

Page 46

Expand

Expend

Language

Auto setup

Keystone

Logo

Security

Power management

Filter counter

Test pattern

Network

Factory default

Lamp counter

Logo

This function allows you to customize the screen logo with Logo select, Capture, Logo PIN code lock and Logo PIN code change functions.

Logo Select

This function decides on the starting-up display

Logo

from following options.

Default .... Show the factory-set logo.

User..........Show the image captured by user.

Off ........... Show the countdown display only.

*“User” is not available for EK-110U

Capture

You can capture a projected image as start logo . Select "Capture" and press the OK button on remote control or control panel.

Conrmation dialog box appears, select "Yes"

to start capturing. *”Capture” is not available for EK-110U

Logo PIN code Lock

This function prevents an unauthorized person from changing the screen logo.

Off ............The screen logo can be changed freely from the Logo menu.

On ............The screen logo cannot be changed without a Logo PIN code.

If you want to change the Logo PIN code lock setting, press the OK button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. *Default PIN code is "111"

Press OK button to enter the PIN code. Press ◄► button to select a number, and then press the

OK button to enter this number, the cursor automatically move to next box. If you fixed an incorrect number, press MENU button to reset it again. Repeat this step to complete entering a three-digit number. After entering the three-digit number, the cursor automatically move to "Set", and press the OK button, then you can start to operate the projector. If you entered an incorrect PIN code, the number (***) turn red, it will be reset automatically within one second. Enter the correct PIN code all over again.

Logo PIN code change

You can change the Logo PIN code (three number). Press the OK button to select Logo PIN

code change. Logo Pin code dialog box appears, press◄►button to enter the correct PIN code. The New Logo PIN code input dialog box appears. Set a new Logo PIN code, conrmation box

appears, select Yes to set the new Logo Pin code. Be sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no longer change the Logo PIN code setting.

CAUTION: WHEN YOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE LOGO PIN CODE NO. MEMO ON PAGE 81, AND KEEP IT SECURELY. SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED.

Page 47

Expend

Language

Auto setup

Keystone

Logo

Security

Power management

Filter counter

Test pattern

Network

Factory default

Lamp counter

Expand

Security

This function allows you to use the PIN code lock and PIN code change functions to set the security for the projector operation.

PIN code lock

This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.

Off .... Unlocked.

On .... Enter the PIN code every time

turning on the projector.If you want to change PIN code lock setting or PIN code,you must enter the PIN code. The default PIN code is "111".

If you want to change the PIN code lock setting, press the OK button, then PIN code dialog box appears.

Press ◄► button to select a number, and then press the OK button to enter this number, the cursor automatically move to next box. If you fixed an incorrect number, press MENU button to reset it again. Repeat this step to complete entering a three-digit number. After entering the three-digit number, the cursor automatically move to "Set", and press the OK button, then you can change the PIN code lock setting. If you entered an incorrect PIN code,the number (***) turn red, it will be reset automatically within one second. Enter the correct PIN code all over again.

PIN code change

The PIN code can be changed to three-digit number. Press  button to select PIN code change. Pin code dialog box appears, Press ◄► button to enter the correct code. The New PIN code input dialog box appears. Set a new PIN code.

Note:



● Keysotne-Curved correction and Logo - Capture and User function does not support EK-110U.

Page 48

Expand

Expend

Language

Auto setup

Keystone

Logo

Security

Power management

Filter counter

Test pattern

Network

Factory default

Lamp counter

Expend

Language

Auto setup

Keystone

Logo

Security

Power management

Filter counter

Test pattern

Network

Factory default

Lamp counter

No signal

01 : 20

Power management

For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options:

Ready

When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the remote control or top control is pressed.

Shut down

When the lamp has been fully cooled down, the power will be turned off.

Off

Power management function is off.

Timer

If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with No signal appears. It starts the countdown until the lamp is turned off. Press  button to set the Timer(1~30min.)

Ready countdown

Set the time that ready status transfers to standby status automatically.(0-30min. 0 Min: not transfer automatically)

In ready status, press POWER button to switch to

standby status, and press any other button to turn on the projector.

Power management

Time left before Lamp is off.

Note:



Factory default: "Timer: 5 min",

"Ready countdown: 5 min".

Filter counter

This function is used to set a frequency for lter

cleaning.

When the projector reached a specied time

between cleanings, a Filter warning icon appears on the screen, notifying the cleaning

is necessary. After cleaning the lter, be sure

to select RESET and set the timer. The Filter

warning icon will not turn off until the lter

counter is reset.

Filter counter

Display the using time of the lter.

Timer Set the time to displaythe warning icon.

Filter counter reset

Reset the lter counter.(See page 66)

Filter counter

Page 49

Expand

Expend

Language

Auto setup

Keystone

Logo

Security

Power management

Filter counter

Test pattern

Network

Factory default

Lamp counter

Expend

Language

Auto setup

Keystone

Logo

Security

Power management

Filter counter

Test pattern

Network

Factory default

Lamp counter

Filter check

Check the temperature iside the projector and make reactions.

On: enable the lter check function

*when the projector checked any filter issue the warning message would pop-up automatically

Off: disable the lter check function

Note:



● When the lamp counter is less than 50 hours, and the projector has checked lter warning

condition, there won't pop-up the warning message but the lter check function would change

the seeting from On to Off automatically.

● The warning message will automatically disappear after 30 seconds, there only the power

button is effective during that period.

● The warning message will pop-up again if the projector has checked the lter warning

condition.

● The checking term of lter check function is every 10 minutes after power on the projector.

And the projector would stop to check the lter condition after the 3rd term (30 minutes).

Test Pattern

This function is used to set the internal test signal: Gray scale 1, Gray scale 2, Gray scale 3, Gray scale 4, Color bar, Red, Green, Blue, Cross hatch, White, Black and Raster gray.

When you get into the Test Pattern mode, press MENU to get back the selection page of Test Pattern.

Test Pattern

Network

Function : PC controls projector via LAN. Preparation:

1. Equipments: PC, projector, cables

2. Connection procedures: Connect the projector to routers or switches of the LAN by direct or cross cable. If it fails to connect PC and projector by parallel cable, please switch to cross cable as suggested.

3. After the computer is booted and the projector is plugged in, indicator lights of LAN interface

on will ash continuously.

Operation procedures: 1 Turn on the projector. 2 Obtain network address. DHCP set is

displayed as On and obtain network address automatically.( If familiar with network, you can set DHCP as Off and obtain network address manually.)

3 Enter network settings menu.

Page 50

Expand

ENTER

192 168 1 100

Network setting

DHCP Off

Set

Cancel

IP address

Subnet

Gateway

DNS

Adjust Select Back

LAN

Esc

255 255 255 0

192 168 1 1

192 168 1 100

192 168 1 1

Expend

Language

Auto setup

Keystone

Logo

Security

Power management

Filter counter

Test pattern

Network

Factory default

Lamp counter

ENTER

Network setting

DHCP On

Set

Cancel

IP address

Subnet

Gateway

DNS

Adjust Select Back

LAN

Esc

(1) Press MENU button on the remote control to display screen menu. Press  button to select Expand, then press the OK button.

(2) Press  button to select Network, and then press the OK button to enter the network menu. MAC address ... Displays the MAC address of wired network of this projector.

IP address .........Displays the IP address of

wired network of this projector.

(3) When DHCP is set On, IP address, Subnet, Gateway and DNS will be obtained

automatically, press the OK at "Set" to conrm

the parameters.

When DHCP is set Off, press the OK button to enter IP address, then press  button to enter Subnet, Gateway and DNS respectively,

press the OK at "Set" to conrm the parameters.

Factory default

This function returns all setting values except for the User logo, PIN code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings.

Note:



See page 53 for usage of Network.

Lamp Counter Reset

This function resets the counter of Lamp usage hours.Please be sure to reset the lamp counter after replacing the lamp. WARNING indicator turns Off and the lamp replacement icon disappears after reset the lamp counter.

Press < MENU > button on the remote controller or on the top control panel to display the OSD menu. Press button to select the

Expand menu, then press <OK> or button

1) Press

menu.

2) Press <OK > button.

3) Press button to select [Lamp counter

reset], then press <OK> button.

4) " Lamp replacement counter reset ? "

conformation box appear.

5) Select "Yes" and Press <OK> button.

button to select [Lamp counter]

Lamp counter

Page 51

Memory viewer

The Memory Viewer function makes it possible to project the pictures which are stored in the USB memory when the USB memory is inserted into the projector

1 Press INPUT button on the remote control to select MEMORY VIEWER from the Input menu. 2 Press MENU button on the remote control to display screen menu. Press  button to select "Memory Viewer", then press the OK button. 3 Press  button to select the item you want to set, press the OK button. 4 Press  button to adjust the item, then press the OK button.

Set Slide

Start the slide show.

Slide transition effect

Set the slide transition effect when the slide show image is switching.

Slide down ... Switch the image from the top to the bottom.

Slide right .... .Switch the image from the left to

the right.

Sort Order

Set the sort order of the slide show.

Extend Order ...... Sort les or folders in

extended order.

Size Order .......... Sort les or folders in

amount of data order.

Time Order ......... Sort les or folders in stored

time order.

Name Order ....... Sort les or folders in name

order.

Rotate

Set the rotate direction of image.

No Rotate ........... Rotate is disabled.

270 Degrees ...... Rotate 270 degrees in

anti-clockwise direction.

180 Degrees ...... Rotate 180 degrees.

90 Degrees ........ Rotate 90 degrees in anti-

clockwise direction.

Best Fit

Set the image whether or not to fit with the projected screen.

On ...... Display the image to t with the

aspect of the projected screen.

Off ...... Display in the normal pixels of the

image.

Memory Viewer menu

Memory

Viewer

Set slide

Note:



Slide transition effect

Sort order

Rotate

Best fit

Repeat

Apply

Slide right

Name order

No rotate

Off

● The "Memory Viewer" menu is available when the input source choose "Memory Viewer".

● The menu except for "Set Slide" which setting

have been changed is not yet effective before the "Apply" is not executed.

● See page 61 for Memory viewer function.

Repeat

Set whether or not to play the slide show repeatly.

On ...... Repeat broadcast the rst le after the

last le is broadcasted.

Off ...... Return to the thumbnail display after

the last le is broadcasted.

Apply

Execute the setting in slide show.

Press  to select "Apply", then press the OK button, the setting of the items except for "Set Slide" will be effective.

Page 52

Information

The information menu is used to the detect signal of projected image and running state.

Menu operation

Press MENU button on the remote control or top control to display the screen menu. Press

to select Info., the information menu will



appear as the right picture.

The information below will display in information menu.

Input

The selected input source is displayed.

H-sync freq .

The horizontal frequency of the input signal is displayed in KHz or - - - -KHz when no signal is detected.

V-sync freq .

The vertical frequency of the input signal is displayed in Hz or - - - - Hz when no signal is detected.

Lamp status

The setting status of "Lamp control" is displayed.

info. menu

Info.

Input

H-sync freq.

V-sync freq.

Lamp status

Lamp counter

Power management

Image mode

1024 x 768, 60Hz

Computer 1

48.24 kHz

60.06 Hz

2 H

Ready

5 Min

Standard

Lamp counter

The usage time of the lamp is displayed.

Power management

The setting status of "Power management" is displayed.

Image mode

The setting status of "Image mode" is displayed.

Page 53

Network Control Instructions

Expend

Network

Network setting

Network information

MAC address

IP address

7C 6F F8 4E 48 A8

192.168.1.100

ENTER

Network setting

DHCP On

Set

Cancel

IP address

Subnet

Gateway

DNS

Adjust Select Back

LAN

Esc

LAN control

Function : PC controls projector via LAN.

Preparation:

1. Equipments: PC, projector, cables

3. After the computer is booted and the projector is plugged in, indicator lights of LAN interface

and computer interface will ash continuously.

Operation procedures: 1 Turn on the projector. 2 Obtain network address. DHCP set is displayed as on and obtain network address automatically. If familiar with network, you can set DHCP as close and obtain network address manually. 3 Enter network settings menu. (1) Press MENU button on top control or remote control to display screen

menu. Press ▲▼ button to select

"Expand" icon, then press the OK button.

(2) Press ▲▼ button to select "Network"

setting and press the OK button enter the network setting.

(3) Press ▲▼ button to set DHCP as on.

(4) Press ▲▼ button to "Set" and press

the OK button."Please wait..." appears.

Page 54

Network Control Instructions

4. Activate the Web browser in the personal computer.

5. Enter the IP address set by the projector into the URL input eld of the Web browser.

6. Select "Login" to login the Network Display System page. (Both the initial name and passwords are "admin".)

Note:



● You can click the upper right corner of the web browser screen to select the display language.

● Do not perform setting or control simultaneously by starting up multiple web browsers. Do not

set or control the projector from multiple computers.

● Change the password rst. (8 half-width characters). (page 55)

● If the screen for the web control is not displayed, consult your network administrator.

7. Items in Network Display System page including: "System Status", "General Setup", "Picture Setup", "Image Setup" and "Network Setup".

① ② ③ ④ ⑤

System Status

①

The "System Status" page is displayed by clicking this item.

General Setup

②

The "General Setup" page is displayed by clicking this item.

Picture Setup

③

The "Picture Setup" page is displayed by clicking this item.

Image Setup

④

The "Image Setup" page is displayed by clicking this item.

Network Setup

⑤

The "Network Setup" page is displayed by clicking this item.

Page 55

Network Control Instructions

"System Status" page Display the status of the projector for the following items.

Model Name

①

Displays the model No. of the projector.

Versions

②

Displays the version of the rmware of the

projector.

LAN Status

③

Displays the connection status of the LAN.

①

②

③

"General Setup" page Change Password for Webpage is displayed.

Enter Old password

①

Enters the congured password.

Enter New password

②

Enters the new password.

Conrm New password

③

Enters the wanted new password again for

conrmation.

① ② ③ ④

⑤ ⑥

Apply

④

Updates the settings.

Power

⑤

Switches on/off the power of the projector.

Source Select

⑥

Switches the input source of the projector.

Page 56

"Picture Setup" page

Network Control Instructions

① ② ③ ④ ⑤

⑥

Brightness

①

Adjusts the brightness of the projected image.

Contrast

②

Adjusts the contrast of the projected image.

Sharpness

③

Adjusts the sharpness of the projected image.

Color

④

Adjusts the color saturation of the projected image.

Tint

⑤

Adjusts the skin tone of the projected image.

Color Temperature

⑥

Adjusts the color temperature of the projected image.

Page 57

"Image Setup" page

Network Control Instructions

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨

⑩

⑪

Aspect

①

Switches the aspect of the projected image.

Fine sync

②

Adjusts the ne sync of the projected image.

H Positon

③

Adjusts the horizontal position of the projected image.

V Position

④

Adjusts the vertical position of the projected image.

H.Size

⑤

Adjusts the total number of dots of the projected.

Freeze

⑥

Switches the freeze function between on and off.

Auto PC adj.

⑦

Executes the Auto PC adj. function.

V Keystone

⑧

Corrects the keystone in vertical direction.

H Keystone

⑨

Corrects the keystone in horizontal direction.

Curved Correction

⑩

Corrects the pincushion or barrel of the projected image.

Corner correction

⑪

Corrects the four corners of the projected image.

Page 58

Network Control Instructions

"Network Setup" page

LAN Setup

①

Select [Obtain an IP address automatically] if you want to enable the DHCP client.

① ②

Gateway Enter the default gateway address when not using a DHCP server.

IP Address Enter the IP address when not using a DHCP server.

Subnet Enter the subnet mask when not using a DHCP server.

8. PwPresenter software: when "Network" is selected in Source Select, you can project the current computer images via network.

Input the IP address of the projector in webpage to enter the Network Display System, click "Download" to download the pwPresenter software according to your operation system.

DNS Enter the DNS server when not using a DHCP server.

Apply

②

Updates the settings.

9. Click icon to access the pwPresenter software.

①

② ③

⑥

④ ⑤

Page 59

Network Control Instructions

①

Search for projector display

Click to enter Search, select the projector and connect it. Please setting the same IP address of the projector in pwPresenter software, (such as: 192.168.1.100). Both the initial name and passwords are "admin".

Note:



● Before use pwPresenter software to search, you need change Source Select to

②

Play/Pause

Play or pause the selected image.

Choose capture mode

③

Choose a capture mode from "FullScreen", "FixedSize" or "Alterable."

Parameters Setting

④

Basic Setting: setting language,region of capture image etc,.

Advanced Setting: setting image quality, network port etc,.

"Network".

Page 60

Network Control Instructions

Global Setting: setting remote control, capture by audio or screen etc.

Multicast Setting: setting Sound volume, Bandwidth and Capture rate etc.

Network Display Management

⑤

Setting device and password management.

Disconnect the projector.

⑥

Page 61

Using useful functions

Memory Viewer function

The Memory Viewer function is used to project the pictures which are stored in the USB memory when the USB memory is inserted into USB A(VIEWER) terminal of the projector.

Memory Viewer function supports the following image les.

Extension name Format Description

jpg/jpeg

Picture

Display the Memory Viewer screen

1. Press the INPUT button on the remote control or on the top control to select the input source as

Memory Viewer.

2. Insert the USB memory into the USB-A terminal of the projector directly, the standby screen of Please

Press "OK" appears when the USB memory icon is displayed on the screen.

Press the OK button on the remote control, the root directory of the USB memory will appear in

thumbnail on the screen.

Play the pictures

It will display a picture when play the picture manually every time.

1. Press ▲▼◄► to select a le.

2. Press the OK button, the picture will display on the full screen.

3. Press ►to switch to the next picture, press◄ to return to the previous picture.

4. Press the OK button on the remote control.

bmp

png 24, 48 bit True color

gif 1, 4, 8 bit Palette-based Max. resolution : 800 x 600 tiff — Max. resolution : 800 x 600

Baseline encoder 24 bit Max. resolution : 10000 x 10000 Progressive RGB 24 bit Max. resolution : Panel Resolution 1, 4, 8 bit Palette-based RGB 24, 32 bit

Max. resolution : 1280 x 800

24 bit color palette space Max. resolution : 1024 x 768

Executing the slide

All pictures in the same folder will play automatically when "Slide Transition Effect" of "Memor y Viewer" menu are set to the special setting.

1. Press ▲▼◄► to select a le.

2. Press the "MENU" button to select the "Memory Viewer" → "Set Slide".

3. Press the OK button.

● The picture will display on the full screen.

● Press the OK button to return to the thumbnail screen.

Page 62

1/6

Using useful functions

Play the PDF

Playing the PDF le. press ▲▼◄► to select a PDF le and press the OK button, playing the PDF on the full screen.

Displays the previous or next page.

The page number increases or decreases by 5 pages.

The page number increases or decreases by 1 page.

Termination of the Memory Viewer

1. Press ▲▼◄► to the thumbnail which is displayed on the upper left corner.

2. Press the OK button on the remote control to return to the standby screen of Press "OK ".

3. Remove the USB memory directly.

Jumps to page number directly.

Switches PDF le between full screen display or whole page display.

Switches the display size on 3 levels of magnification. Press ▲▼on the

remote control to move the display screen up and down.

Remove the display screen up, down, left and right by ▲▼◄►button on

the remote control.

Exit the PDF le, and return to the thumbnail screen.

Page 63

Using useful functions

USB Display function

The USB Display function is used to project the image from the computer which is connected to USBB(DISPLAY) terminal of the projector by a USB converting cable.

■ When using Windows

Windows operation environment

OS Windows Vista 32 bit, Windows 7 32/64 bit, Windows 8 32/64 bit

CPU Intel Core 2 Duo 2.0 GHz or faster, the compatible processor

Amount of memory 256 MB or more (Recommended : 512 MB or more)

Hard-disk free space 20 MB or more

Display Resolution 640 x 480 or more, 1 600 x 1 200 or less

● There is no guarantee for all computers that meet the above conditions will operate properly.

Projecting the USB Display

1. Connect the USB-B terminal of the projector to a computer with a USB converting cable.

2. Press the USB DISPLAY button on the remote control or switch the input source to USB Display.

Press the INPUT button on the top control and select the input source in the Input menu.

●

● The startup screen will be displayed automatically due to the driver which is built-in the projector, and

excutes the installation according to the instructions of the screen. The displaying of the auto installation screen depends on the setting of computer. At this time, please select "Run autorun.exe". Please double-click "autorun.exe" in the folder of the USB Display when the automatical startup is disabled.

The image on the computer screen is projected.

●

3. Click the driver icon in the task bar of computer and select one item in Pop-up menu.

● Pop-up menu is only displayed in English.

● The item which is displayed in gray is unavailable.

Active audio/ Disable audio

Play video/

Pause video

Start/Stop Set whether to display the image from the computer.

Exit Exit USB Display.

Note:



- The driver is not installed in your computer, and it will be removed from the computer when

disconnecting the USB cable.

- It will take a while when you want to project the computer screen.

- Connect a USB cable directly to the USB connector of a computer. It will not work when

connecting through a USB hub.

Set whether to output the audio from the computer.

Switch between play and pause the image.

Termination of the USB display

When terminate the USB display, remove the USB cable directly. There is no need to follow "Remove hardware safely" when a USB cable is disconnected.

Page 64

Using useful functions

■ When using Mac OS

Mac OS operating environment

OS Mac OS X 10.5, 10.6, 10.7

CPU Power PC G4 1GHz or faster

Amount of memory 512 MB or more

Hard-disk free space 20 MB or more

Display Resolution 640 x 480 or more, 1 600 x 1 200 or less

● There is no guarantee for all computers that meet the above conditions will operate properly.

Projecting the USB Display

1. Connect the USB-B terminal of the projector to a computer with a USB converting cable.

2. Press the USB DISPLAY button on the remote control or switch the input source to USB Display.

● Press the INPUT button on the top control and select the input source in the Input menu.

● The image on the computer screen is projected.

3. Double-click "Monitor.app" in the virtual disk that has been mounted.

4. Right-click the driver icon in the dock of computer and select one item in Pop-up menu.

● Pop-up menu is only displayed in English.

● The item which is displayed in gray is unavailable.

Active audio/

Disable audio

Play video/

Pause video

Start/Stop Set whether to display the image from the computer.

Quit Terminate the USB Display.

Note:



- It will take a while when you want to project the computer screen.

- Connect a USB cable directly to the USB connector of a computer. It will not work when

connecting through a USB hub.

Set whether to output the audio from the computer.

Switch between playing and pausing the image.

Termination of the USB display

When terminate the USB display, remove the USB cable directly.

Page 65

Maintenance and cleaning

WARNING indicator

The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator to take proper maintenance.

The projector is shut down and the WARNING

indicator is ashing red.

When the temperature inside the projector exceeds the normal temperature, the projector is automatically shut down to protect internal components. The WARNING indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the POWER button.

Note:



The WARNING indicator continues to blink even after the temperature inside the projector returns to normal. When the

projector is turned on again, the

WARNING indicator stops blinking.

Check the items below: – Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if ventilation slots are not blocked. – Has the projector been installed near the duct or vent of an airconditioning? Move the installation of the projector away from the duct or vent.

– Are the air lters clean? Clean the air lters

periodically.

WARNING indicator

ashes red.

The projector is shut down and the WARNING indicator lights red. When the projector detects an abnormal condition, it is automatically shut down to protect the internal components and the WARNING indicator lights red. In this case, unplug the AC power cord and plug it, and then turn on the projector once again to verify operation. If the projector cannot be turned on and the WARNING indicator lights red, unplug the AC power cord and contact the service station for servicing and maintenance.

Caution Do not leave the projector with the AC power cord connected under an abnormal condition.

It may result in re or electric shock.

WARNING indicator

WARNING indicator lights red.

Page 66

Maintenance and cleaning

Cleaning the lter

The air lter prevents dust from accumulating on the surface of the optical elements inside the projector. Should the air lter become clogged with dust particles, it will reduce cooling

fans’ effectiveness and may result in a buildup of internal heat and adversely affects the life of

the projector. If the Filter warning icon appears on the screen, the air lter should be cleaned immediately. Clean the air lter following the steps below.

1 Turn off the projector, and unplug the AC power cord from the AC outlet.

2 Remove the air lter.

3 Gently clean the lter with a brush.

4 Reinstall the lter into the projector properly.

Filter

Caution Do not operate the projector with

the air lter removed. Dust may

accumulate on the optical elements, degrading picture quality. Do not put any small objects into the air intake vents. Otherwise, it may result in malfunction of the projector.

Filter counter reset

Be sure to reset the lter counter after cleaning

or replacing the lter.

1. Press Menu on the remote control to display the screen menu. Press to select "Expand", then press the OK button.

2. Press  to select "Filter counter", and then press the OK button. Press  to select "Filter counter reset" and press the OK button, "Filter counter Reset?" appears on screen, select "Yes" to continue.

3. When another dialog box pops up, select

"Yes" to reset the lter.

Recommendation We recommend avoiding dusty/smoky environments when you operate the projector. Usage in these environments may cause poor image quality. When you use the projector under dusty or smoky conditions, dust may accumulate on the lens, LCD panels, or optical elements inside the projector. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.

Order Replacement Filter

Replacement Filter can be ordered through your dealer. When ordering a projection

lter, give the following information to the

dealer.

Replacement lter Model No.:

63340044

Page 67

Maintenance and cleaning

Clean the projector lens

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that contains non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of lens.

Clean the cabinet

Unplug the AC power cord before cleaning.

Gently wipe the projector surface with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount of mild detergent

and nish with a soft dry cleaning cloth. Avoid

using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet.

When the projector is not in use, put the projector in a pouch to protect it from dust and scratches.

Page 68

Replace the lamp

Maintenance and cleaning

When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen. Replace the lamp with a new one of the same type promptly. The timing when the lamp replacement icon appears is depending on the lamp mode.

CAUTION

As temperature inside the projector is high, you should cool the projector for at least 45 minutes before you open the lamp cover.

CAUTION

When the lamp isn’t illuminated, it may indicate that the lamp has been damaged. When you replace the lamp in a projector installed on the ceiling, you should stand beside the lamp cover other than under it; for the broken glass may fall down to hurt you. To do that, remove the lamp cover gently to avoid being hurt by falling debris. If debris drops into your eyes or mouth, you should see the doctor immediately.

To replace the lamp, follow the steps below:

1. Power off the projector and unplug the power cord. Then let the projector cool for at least 45 minutes.

Lamp replacement icon

Lamp replacement

CAUTION

For the sake of safety, only use the lamp of the same model. Never drop the lamp onto the ground nor touch the glass bulb! The glass can shatter and hurt.

Screw

2. Loosen the screw on the lamp cover to remove the cover.

3. Make sure the lamp is well protected and remove three screws. Hold the handle to take out the lamp.

4. Install a new lamp with the same model and tighten the four screws. Make sure the installation is correct. Put lamp cover in place and then tighten the screw.

5. Plug the AC power cord and power on the projector.

Handle

Lamp cover

Screw

Page 69

Maintenance and cleaning

Order Replacement lamp

Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer.

Replacement Lamp Model No.: 23040052 (for EK-100W, EK-101X, EK-102X) 23040054 (for EK-110U)

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly.

Improper handling may result in accidents, injury, or create a re hazard.

● Lamp life may differ from lamp to lamp and according to the environment of use. There is no

guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter

period of time than other similar lamps.

● If the projector indicates that the lamp should be replaced, i.e., if the

(Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use

of the lamp with the WARNING indicator lighted may increase the risk of lamp explosion.

● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its

lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in

which the projector and lamp are being used.

, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.

appears

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD

BE TAKEN .

the Lamp replacement icon

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an

authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check

carefully to ensure that there are no broken shards or pieces of glass around the projector or coming

out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully.

No one should check the inside of the projector except those who are authorized trained technicians

and who are familiar with projector service. Inappropriate attempts to service the unit by anyone,

especially those who are not appropriately trained to do so, may result in an accident or injury caused

by pieces of broken glass.

Page 70

Appendix

Troubleshooting

Before calling your dealer or service center for assistance, check the items below once again.

- Make sure you have properly connected the projector to peripheral equipment.

- Make sure all equipment is connected to the AC outlet and the power is turned on.

- If the projector does not project an image when it is connected to a PC, restart the PC.

Problems – Solutions

No power - Plug the power cord of the projector into the AC power outlet.

No initial displaying - Make sure that Logo function is not set to "Off". (Page 46)

Initial displaying is inconsistent with factory defaults Input signals are automatically switched (can’t be switched)

Ambiguous images - Adjust the focus.

Image turns over leftward/ rightward Image turns over upward/ downward Image not bright enough - Check whether the contrast or brightness is adjusted correctly.

- Check whether the POWER indicator lights red.

- Only when the POWER indicator lights red you can power on the projector again.

- Check the WARNING indicator. If it is blinking red, the projector can not be powered on. (Page 65)

- Check the projection lamp. (Page 68)

- Unlock the “Key lock” function. (Page 40)

- Make sure that Logo function is not set to "Off" or "User". (Page 46)

- Properly adjust the Input search function.

- Set a more proper projection distance.

- Check whether the lens needs to be cleaned.

- When moved from a environment with low temperature to the one with higher temperature, water will be condensed on the lens. If so, you have to wait till the condensed water disappears.

- Check the function of “Ceiling/rear”. (Page 32)

- Check the function of “Ceiling”.(Page 32)

(Page 36-37)

- Check whether the Image mode is properly selected. (Page 35)

- Check the function of lamp brightness adjusting. (Page 36-37)

No image - Check the connection between Computer or video equipment and

the projector.

- Check whether the signal from Computer is correct. If connected to certain laptops, the settings of their video adapters need to be changed. You can refer to the operating instructions of the Computer

for such modication.

- Images can show up only about 20 seconds after the projector is powered on.

- Check the input signal, color system, video system or Computer system mode.

- Make sure that the temperature doesn’t exceed the permitted

operating temperature(41˚F-104˚F [5˚C - 40˚C] ).

- If BLANK function is enabled, no image will appear on the screen. You can then press the BLANK button or other button on the remote control.

Page 71

Appendix

No Sound - Check the audio cable connection from audio input source.

The color is abnormal - Check the input signal, color system, video system or computer

Auto PC adj. function does not work.

The Settings cannot be saved after turing off the projector.

Power management function does not work. Logo function does not work. - Check connections and input source.

Auto setup function does not work. - Make sure no function in the Auto setup menu is set to “Off”.

The image is distorted or disappears. PIN code dialog box appears at start-up The remote control does not work. - Check the batteries.

Indicators light or ash. - Refer to Indicators and projector condition to check the status of

Exclamatory mark appears on the screen. top control cannot be operated. - Unlock the Key lock in Setting -> Key lock.

Unable to unlock the Logo PIN code, Key lock or PIN code lock.

- Adjust the audio source.

- Press the VOLUME + button.

- Press the Mute button.

- When the AUDIO OUT is plugged in, the projector’s built-in speaker is not available.

- Is the image projected? The sound can only be heard when the image is projected.

system mode.

- Make sure that Blackboard is not selected in Image Mode menu.

- Check the Input signal. Auto PC adj. function can not work when 480p, 576p, 720p, 480i, 576i, 1080i or 1080p is selected.

- Make sure you have selected “store” after you changed the settings. Some settings can’t be saved if “ store” is not selected.

- Power management function can not work while Freeze or Blank function is running.

- Make sure “On” is not chosen in the Ceiling function.

- Check and adjust “ Screen” menu.

- PIN code lock is being set.

- Make sure no obstruction is between the projector and the remote control.

- Make sure you are not too far from the projector when using the remote control. Maximum operating range is 5 m.

- Unlock the Key lock function in the Setting menu for the remote control.

the projector.

- Your operation is invalid. Operate correctly.

- Contact the dealer or the service center.

Warning:

High voltages are used to operate this projector. Do not attempt to open the cabinet.

If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.

Page 72

Appendix

Menu Tree

Main menu Sub menu Setting Note

Auto PC adj.

Fine sync 0 to 31

H Position -5 to +5

V Position -5 to +5

In different signal, H.Size range will different

"Full" is not available for EK-110U

Component input

S-video Input Video Input

Display

Color adjust

H.Size -15 to +15

Aspect

Project way

Menu positon

Background display

System

Image mode

Normal Wide Full

Front Rear Ceiling/Front Ceiling/Rear Auto ceiling/Front Auto ceiling/Rear

Upper left Upper right Center Lower left Lower right

Black Blue

Auto 1080p 1080i 1035i 720p 575p 575i 480p 480i

Auto PAL SECAM NTSC NTSC4.43 PAL-M PAL-N PAL60

Dynamic Standard Cinema Blackboard(Green) Colorboard User Image

Page 73

Appendix

Main menu Sub menu Setting Note

Contrast 0-63 Brightness 0-63 Color temp. High/Mid/Low

Color adjust

Setting

Red 0-63 Green 0-63 Blue 0-63 Sharpness 0-15 Contrast 0-63 Brightness 0-63 Color 0-63 Tint 0-63 Red 0-63 Green 0-63 Blue 0-63 Sharpness 0-15 On start On/Off Standby mode Normal/Eco High land On/Off Lamp control Normal/Eco Cooling fast Normal/60 sec/0 sec Closed caption Off, CC1,CC2,CC3, CC4 Key lock Off, Projector, Remote control Iris On/Off Terminal Computer2/Monitor out

Sound

HDMI setup

Sound 0-25 Mute On/Off

Image

Sound

64-940

0-1023

HDMI

Computer

Computer input

Component Input S-video Input Video Input

Expand Language

English, German, French, Italian, Spanish, Polish, Swedish, Dutch, Portugese,

Japanese, Simplied Chinese,

Traditional Chinese, Korea, Russian, Arabic, Turkish, Finnish, Norwegian, Danish, Indonesian, Hungarian, Czech, Kazak, Vietnamese, Thai, Farsi

26 Languages

Page 74

Appendix

Main menu Sub menu Setting Note

Input search On/Off

Auto PC adj. On/Off

Expand

Auto setup

Keystone

Logo

Security

Power management

Filter counter

Test Pattern

Network

Factory default

Lamp counter

Auto keystone

Keystone Store/Reset

H/V Keystone

Corner correction

Curved correction

Reset value

Logo select Default/User/Off

Capture

Logo PIN code lock On/Off

Logo PIN code change

PIN code lock On/Off

PIN code change

Ready Shut down Off Timer Ready countdown

Filter counter Timer Filter counter reset

Filter check On/Off

Off,Gray scale1(1-4), Colorbar, Red, Green, Blue, Cross hatch, White, Black, Raster gray

Network setting

Network information

Lamp counter Lamp counter reset

Off

Auto

Manual

DHCP IP address Subnet Gateway DNS

MAC address IP address

"User, Capture" is not available for EK-110U

Page 75

Appendix

Main menu Sub menu Setting Note

Set Slide

Slide down Slide right

Extend order Size order Timer order Name order

No Rotate 270 Degrees 180 Degrees 90 Degrees

Memory Viewer

Info.

Slide transition effect

Sort Order

Rotate

Best Fit On/Off Repeat On/Off Apply Input H-sync freq. V-sync freq. Lamp status Lamp counter Power management Image mode

Input

VGA 1

VGA 2*

HDMI

Component

Video

S-video

Network

Memory Viewer

USB Display

* VGA 2 can't be selected when using the VGA IN 2/VGA OUT terminal as VGA OUT.

Page 76

Appendix

Indicator and projector state

Check the indicator to know about the state of projector.

Indicator

WARNING

(Red)

POWER

(Green/Red/

Yellow)

Your projector is in Off status (without AC power supply).

Your projector is in standby status. Press Standby button to turn it on.

Your projector is in normal status.

It is ready for standby or the lamp is cooling. You may power on your projector

only after the lamp is fully cooled and the POWER light indicator stops ashing.

Your projector is in Ready mode.

Your projector cannot power on, as its internal temperature is too high. You may power it on after it is fully cooled, temperature backs to normal, and the POWER light indicator turns red.

Your projector detects lamp abnormality and switches into standby mode.

Your projector detects the temperature abnormality and switches into standby mode.

State of projector

Your projector detects power abnormality.

Your projector detects fan abnormality.

Your projector detects IRIS abnormality.

Your projector detects its usage time ≥ the life of the projector -300H when the

projector usage time <1.1 times the life of the projector.

Your projector detects its usage time ≥ 1.1times the life of the projector.

Green Red

Flash green

Flash red

Yellow

Flash Yellow

Off

* When the lamp reaches the end of its life, the LAMP indicator lights Yellow. In this case, replace the lamp with a new one promptly.

Page 77

Appendix

Compatible computer specications

Your projector is designed to accept every analog computer signal below Dot Clock 160MHz and digital computer signal below Dot Clock 150MHz. See table below for details on resolution and relevant frequency.:

Input

VGA

Component

Signal format

SVGA

MAC 16 832x624 75

MXGA 1152x864 75

WXGA

QVGA

SXGA

SXGA+

UXGA 1600x1200 60

WSXGA+ 1680x1050 60

WUXGA 1920X1200 60

1080i 1920x1080i 50

1080i 1920X1080i 60

Resolution

640x480 60

640x480 68

VGA

XGA

480i 720x480i 60

576i 720x576i 50

483p 720x483p 60

576p 720x576p 50

720p 1280x720 50

720p 1280x720 60

640x480 72

640x480 75

640x480 85

800x600 56

800x600 60

800x600 72

800x600 75

800x600 85

1024x768 60

1024x768 70

1024x768 75

1024x768 85

1280x768 60

1280x768 75

1280x768 85

1280x800 60

1280x800 75

1280x800 85

1366x768 60

1280x960 60

1280x960 85

1280x1024 60

1280x1024 75

1280x1024 85

1400x1050 60

1400x1050 75

Frequency

(Hz)

Input

HDMI

Video/S-video

Signal format

SVGA

MAC 16 832x624 75

XGA+ 1152x864 75

WXGA

QVGA

SXGA

SXGA+

UXGA 1600x1200 60

WSXGA+ 1680x1050 60

WUSGA

NTSC NTSC -

SECAM SECAM -

NTSC4.43 NTSC4.43 -

PAL-M PAL-M -

PAL-N PAL-N -

PAL-60 PAL-60 -

Resolution

640x480 60

640x480 68

VGA

XGA

PAL PAL -

640x480 72

640x480 75

640x480 85

800x600 56

800x600 60

800x600 72

800x600 75

800x600 85

1024x768 60

1024x768 70

1024x768 75

1024x768 85

1280x768 60

1280x768 75

1280x768 85

1280x800 60

1280x800 75

1280x800 85

1366x768 60

1280x960 60

1280x960 85

1280x1024 60

1280x1024 75

1280x1024 85

1400x1050 60

1400x1050 75

1024x768 1280x800

Frequency

(Hz)

Page 78

Appendix

Technical Specications

LCD system XGA: 0.63" TFT, active matrix, 3-panel

LCD resolution XGA: 1024X768 / WXGA: 1280X800/WUXGA: 1920X1200

Compatible signals

Color standard PAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N and PAL60

HDTV signal 480i, 480p, 576i, 576p, 720p, 1080i and 1080p

Scanning frequency Horizontal frequency: 15 kHz –100 KHz; Vertical frequency: 48 – 85 Hz

Optical elements

Image size (diagonal lines)

Projection distance

Lens

Lamp Consumption(W) 218W / 225W (for EK-110U only)

Terminal

VGA IN 1/YPbPr/S-VIDEO IN Mini D-sub 15 pin x1

VGA IN 2/VGA OUT Mini D-sub 15 pin x1

HDMI HDMI x2 (one is compatible with MHL)

LAN 100 Base-TX (100Mbps)/10 Base-T (10Mbps) RJ45

USB-B x1(display / Firmware upgrade)

USB-A x1(picture viewer)

RS-232 D-sub 9 pin x1

AUDIO OUT 3.5mm Mini Type Stereo x1

AUDIO IN 3.5mm Mini Type Stereo x1

Composit Video 2RCA (L/R) x1

Power

Voltage and power consumption AC 100–240 V, 50/60 Hz /

Fuse 250V/10A Internal speaker 10W RMS 8ohm, x1

Operating Environment

Operating temperature 41˚F-104˚F (5˚C - 40˚C)

Storage Temperature -4˚F-140˚F (-20˚C - 60˚C) High land 1400 m - 2700 m

Remote control

Battery AAA or LR3 1.5V ALKALINE TYPE x 2 Operating Range 16.4' (5 m)/±30 Dimensions 50mm (W) x 18mm (H) x 110mm (D) Net Weight 50g (including batteries)

Mechanical properties Dimensions (W×H×D ) 347.0mmx109.0mmx257.0mm (Not including protrusion)

Net Weight 3.2Kg Adjustable foot 40mm

Accessories

WXGA: 0.59" TFT active matrix, 3-panel

WUXGA: 0.64" TFT active matrix, 3-panel

30"-300"

XGA: 0.9m-9.1m(W) 1.1m-10.9m(T)

WXGA: 0.9m-9.6m(W) 1.1m-11.6m(T)

WUXGA: 0.9m-9.6m(W) 1.1m-11.6m(T)

F=1.6-1.76, f=19.158-23.018mm; Manual zooming and focusing;

Zoom Ratio: 1.2x optics

RCA x1

180W(Eco), 270W (Normal) for EK-100W, 101X, 102X 190W (Eco), 280W (Normal) for EK-110U

AC Power Cord, Remote Control & battery, VGA Cable Quick Start Guide, Safety Information

● The specication is subject to change without prior notice.

● Liquid crystal panel is made on the basis of high standard, where 99.99% of the pixels are effective. Due to the nature of the liquid crystal panel, a fraction of the pixels (0.01% or less) may be ineffective.

Page 79

Congurations of terminals

8 76 54 3 21

1 2

COMPUTER IN 1

COMPUTER IN 2/COMPUTER OUT

terminal pin assignments and signal names

15141312

109876

54321

15141312

109876

54321

Appendix

1 R/Pr/S-C 9 +5V

2 G/Y/S-Y 10 GND

3 B/Pb/- 11 GND

4 ----- 12 DDC data

5 GND 13 HD/SYNC

6 GND 14 VD

7 GND 15 DDC clock

8 GND

Note:

The Pin 1, 2 and 3 (Pr, Y, Pb): for YCbCr/YPbPr signal. The Pin 1 and 2 (S-C, S-Y): for S-Video signal.

terminal pin assignments and signal names

1 R 9 NC

2 G 10 GND

3 B 11 -----

4 ----- 12 DDC data

5 GND 13 HD/SYNC

6 GND 14 VD

7 GND 15 DDC clock

8 GND

RS232 terminal (D-SUB-9 pin)

1 -----

7 8 9

1 2 3 4 5

2 RXD

3 TXD

4 -----

5 GND

6 -----

7 -----

8 -----

9 -----

HDMI terminal pin assignments and signal names

1 T.M.D.S data2+ 11 T.M.D.S clock shield

3 5 7 9

864

11 13 15 17

1614

2 T.M.D.S data2 shield 12 T.M.D.S clock–

3 T.M.D.S data2– 13 CEC

4 T.M.D.S data1+ 14 -----

5 T.M.D.S data1 shield 15 SCL

6 T.M.D.S data1– 16 SDA

7 T.M.D.S data0+ 17 DDC/CEC GND

8 T.M.D.S data0 shield 18 +5V

9 T.M.D.S data0– 19 Hot plug detection

10 T.M.D.S clock+

USB-B terminal

1 V Bus

2 Data -

3 Data +

4 GND

LAN terminal

1 TX + 5 -----

2 TX - 6 -----

3 ----- 7 RX +

4 ----- 8 RX -

Page 80

Appendix

5-M4X10mm

Content of hazardous substances and elements

Name of parts

Optical parts Electric parts

Cabinet, mechanical parts Lamp unit Batteries Others(Remote control, cable and other parts) Package

Pb Hg Cd Cr6+ PBB PBDE



   

○ ○ ○ ○ ○ ○



○ ○ ○ ○ ○ ○

Hazardous substances and elements

○ ○ ○ ○ ○

○ ○ ○ ○ ○ ○ ○ ○ ○ ○

○ ○ ○ ○

○ ○ ○ ○ ○

This table is formulated in accordance with SJ/T 11364.

○: It means that contents of hazardous substances in all homogeneous materials in this part don’t exceed "Required Limitations" specied in GB/T26572.

×: It means that contents of hazardous substances in at least one homogeneous material in this part

exceed "Required Limitations" specied in GB/T26572.

Note:

：

Optical parts includes optical lens, monitor, reection lens ect.

：

Electric parts includes PCB, internal wires, fans, power supply, sensors etc.

Dimensions

103.5



Screw Holes for Ceiling Mount Screw: M4

Unit: mm

Depth: 10.0

110.3

67.2

347.0

109.0

110.0

277.5

298.5

257.0

187.5

190.5

Page 81

Appendix

PIN code memorandum

Write down the PIN code in the blank below and keep it, If you forgot or lost the number and unable to operate the projector, contact the service center.

Factory default PIN code 111*

PIN code lock

Factory default PIN code 111*

Logo PIN code Lock No.

*If this 3-digit number is changed, the factory default number will be ineffective.

Page 82

Page 83

Page 84

U.S.A.

EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132, U.S.A. Tel: +1 800-242-3454

+1 949-457-0200

Fax: +1 800-457-3454

+1 949-457-7878

E-Mail: usa@eiki.com

Canada

EIKI CANADA Eiki International, Inc. Canadian Branch 9170 County Road 93, Suite 304, Midland, ON, L4R 4K4, Canada Tel: +1 800-563-3454

+1 705-527-4084

E-Mail: canada@eiki.com

Deutschland & Österreich

EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein, Deutschland Tel: +49 6126-9371-0 Fax: +49 6126-9371-11 E-Mail: info@eiki.de

China

EIKI (Shanghai) Co., Ltd. LAKESIDE OASIS MIDDLE RING BUSINESS CENTRE Block 1,Room 606, 1628, Jin Sha Jiang Road Shanghai, 200333, CHINA China Tel: +86 21-3251-3993 Service Hot line: +86 21-3251-3995 Fax: +86 21-3251-3997 E-mail: info@eiki-china.com

Oceania

EIKI AUSTRALIA PTY LTD Level 5, 11 Queens Road, Melbourne, Victoria 3004, Australia Tel: +61 03-8530-7048 Fax: +61 03-9820-5834 E-Mail: sales@eiki.net.au

Eastern Europe

EIKI CZECH SPOL. s.r.o. Nad Cementárnou 1163/4a Praha 4, Podolí, 147 00 Czech Republic Tel: +420 241-410-928

+420 241-403-095 Fax: +420 241-409-435 E-Mail: info@eiki.cz

South East Asia

EIKI Industrial (M) Sdn Bhd No. 11, Nouvelle Industrial Park, Lorong Teknologi B, Taman Sains Selangor 1, Kota Damansara PJU5, 47810 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60 3-6157-9330 Fax: +60 3-6157-1320 E-Mail: sales@eiki.my

Japan & Worldwide

EIKI Industrial Company Limited. 6-23 Teramoto, Itami-shi, Hyogo, 664-0026, Japan Tel: +81 72-782-7492 Fax: +81 72-781-5435

World Wide Website http://www.eiki.com

EIKI EIP-110U User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual