Eiki AH-55301, AH-55701, AH-55401, AH-55801, AH-55601 User Manual

...

Press STANDBY-ON on the projector or on the remote control to put the projector into standby mode.

• Disconnect the power cord and unplug the power cord from the AC

Installation Manual

AH-55201 AH-55301 AH-55401 AH-55501 AH-55601 AH-55701 AH-55801

Do not attempt to exchange the lens when the projector is installed hanging from the ceiling. Injury may occur if the lens cover and lens fall.

Before exchanging the lens, reset lens shift to the center position. (The lens shift is located at the center in the factory preset.)

When resetting the lens shift to the center position, press H&V LENS SHIFT and then press UNDO.

• The lens shift reset screen will be displayed. Select “Yes” to reset.

socket after the cooling fan stops.

STANDBY-ON button

H&V LENS SHIFT button

UNDO button

Power cord

Remove the lens cover.

• Press the lens cover removal button (1). Slide the lens cover forward (2).

Turn the lens in the direction of the arrow while pressing the lens removal lever to pull the lens out.

Removal lever

Remove the lens cap from a replacement lens.

Info

If you try to attach the lens to the projector without removing this cap, the optional lens attachment part can be damaged.

Slide and attach the lens cover.

• The power cannot be turned on unless the lens cover is fully inserted.

Insert the hook of the replacement lens to the notch, and turn the lens in the direction of the arrow.

• Make sure that the lens is locked with the lens removal lever when you hear a click sound.

Select the correct lens type in “Lens Type” of “Menu”.

EIP-WX5000, EIP-WX5000L

Attached lens AH-55201 AH-55301 AH-55401 AH-55501 AH-55601 AH-55701 AH-55801

Lens Type Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 Type 7

Note

• For details, see the owner’s manual of the projector.

Printed in China XXXXXXXXXXXXX 08PXX-CH-NM