EIC HER180 Datasheet
HER180
RECTIFIER DIODES
PRV : 8000 Volts
FEATURES :
MECHANICAL DATA :
Notes :
DO - 41
Io : 0.5 Ampere
HIGH EFFICIENT
* High current capability
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* Fast switching for high efficiency
* Case : DO-41 Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 0.339 gram
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING VALUE
SYMBOL UNIT
0.107 (2.7)
0.080 (2.0)
0.034 (0.86)
0.028 (0.71)
1.00 (25.4)
MIN.
0.205 (5.2)
0.166 (4.2)
1.00 (25.4)
MIN.
Maximum Repetitive Peak Reverse Voltage VRRM 8000 Volts
Maximum RMS Voltage VRMS 5600 Volts
Maximum DC Blocking Voltage VDC 8000 Volts
Maximum Average Forward Current Ta = 50°C IF(AV) 0.5 Amp.
Peak Forward Surge Current
8.3ms Single half sine wave Superimposed
on rated load (JEDEC Method) IFSM 30 Amps.
Maximum Peak Forward Voltage at IF = 1.0 Amp. VF 13.6 Volts
Maximum DC Reverse Current Ta = 25°C IR 5.0 µA
at Rated DC Blocking Voltage Ta = 100°C IR(H) 50 µA
Maximum Reverse Recovery Time ( Note 1 )
Junction Temperature Range TJ - 40 to + 150 °C
Storage Temperature Range TSTG - 40 to + 150 °C
( 1 ) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A.
Trr
75 ns
UPDATE : MARCH 17, 2001
RATING AND CHARACTERISTIC CURVES ( HER180 )
+
FORWARD VOLTAGE, VOLTS
0.5101.0
24030
18126
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
50 Ω 10 Ω
D.U.T.
50 Vdc
(approx.)
1 Ω
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.
OSCILLOSCOPE
( NOTE 1 )
PULSE
GENERATOR
( NOTE 2 )
+ 0.5 A
- 0.25 A
- 1.0 A
Trr
0
SET TIME BASE FOR 25-35 ns/cm
1 cm
FIG.2 - DERATING CURVE FOR OUTPUT FIG.2 - MAXIMUM NON-REPETITIVE PEAK
RECTIFIED CURRENT FORWARD SURGE CURRENT
0.4
0.3
0.2
CURRENT, AMPERES
0.1
CURRENT, AMPERES
PEAK FORWARD SURGE
AVERAGE FORWARD OUTPUT
0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100
AMBIENT TEMPERATURE, ( °C)
0
NUMBER OF CYCLES AT 60Hz
FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.5 - TYPICAL REVERSE CHARACTERISTICS
10
TJ = 100 °C
1
0.1
Pulse Width = 300 µs
1% Duty Cycle
FORWARD CURRENT, AMPERES
0.01
0 2 4 6 8 10 12 14 16 18 20
TJ = 25 °C
0.1
MICROAMPERES
REVERSE CURRENT,
0.01
20
TJ = 25 °C
80
40 60 120
100 1400
PERCENT OF RATED REVERSE
VOLTAGE, (%)
Loading...