EIC FR307-STR, FR307, FR306, FR305, FR304 Datasheet

FR301 - FR307-STR

FAST RECOVERY

RECTIFIER DIODES

PRV : 50 - 1000 Volts

Io : 3.0 Amperes

FEATURES :

MECHANICAL DATA :

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Rating at 25

°

C ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

FR307

-STR

Notes :

DO-201AD

* High current capability
* High surge current capability

0.21 (5.33)

0.19 (4.82)

1.00 (25.4)
MIN.

* High reliability
* Low reverse current
* Low forward voltage drop

0.375 (9.52)

0.285 (7.24)

* Fast switching for high efficiency

1.00 (25.4)
MIN.

* Case : DO-201AD Molded plastic

0.052 (1.32)

0.048 (1.22)

* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed

Dimensions in inches and ( millimeters )

* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 1.16 grams

RATING

Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 1000 V
Maximum Average Forward Current

0.375"(9.5mm) Lead Length Ta = 55 °C
Peak Forward Surge Current

8.3ms Single half sine wave Superimposed
on rated load (JEDEC Method)
Maximum Peak Forward Voltage at IF = 3 A VF 1.3 V

Maximum DC Reverse Current Ta = 25 °C
at Rated DC Blocking Voltage Ta = 100 °C
Maximum Reverse Recovery Time ( Note 1 )
Typical Junction Capacitance ( Note 2 ) CJ 60 pf
Junction Temperature Range TJ - 65 to + 150
Storage Temperature Range TSTG - 65 to + 150

SYMBOL FR301 FR302 FR303 FR304 FR305 FR306 FR307

IF(AV) 3.0 A

IFSM 200 A

IR 10

IR(H) 150

Trr

150 250 500 250 ns

UNIT

µA
µA

°C
°C

( 1 ) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A.
( 2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 V

Page 1 of 2 Rev. 01 : April 2, 2002

DC

RATING AND CHARACTERISTIC CURVES ( FR301 - FR307-STR )

+

160

Ta = 50 °C

+ 0.5 A

0

- 0.25 A

- 1.0 A

1 cm

FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM

50 Ω 10 Ω

D.U.T.

50 Vdc

(approx)

1 Ω

NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.

2. Rise time = 10 ns max., Source Impedance = 50 ohms.

3. All Resistors = Non-inductive Types.

OSCILLOSCOPE

( NOTE 1 )

PULSE

GENERATOR

( NOTE 2 )

Trr

SET TIME BASE FOR 50/100 ns/cm

FIG.2 - DERATING CURVE FOR OUTPUT FIG.3 - MAXIMUM NON-REPETITIVE PEAK
RECTIFIED CURRENT FORWARD SURGE CURRENT

3.0

2.4

1.8

1.2

0.6

CURRENT, AMPERES

AVERAGE FORWARD OUTPUT

60Hz RESISTIVE OR INDUCTIVE LOAD

0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100

AMBIENT TEMPERATURE, ( °C)

200

8.3 ms SINGLE HALF SINE WAVE

120

80

CURRENT, AMPERES

PEAK FORWARD SURGE

NUMBER OF CYCLES AT 60Hz

FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.5 - TYPICAL REVERSE CHARACTERISTICS

20
10

Pulse Width = 300 µs

1% Duty Cycle

1.0

0.1

FORWARD CURRENT, AMPERES

0.01 0.01
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0

T

= 25

J

°

C

FORWARD VOLTAGE, VOLTS

10

TJ = 100 °C

1.0

0.1
TJ = 25 °C

80

40 60 120

REVERSE CURRENT, MICROAMPERES

20

100 1400

PERCENT OF RATED REVERSE

VOLTAGE, (%)

Page 2 of 2 Rev. 01 : April 2, 2002