EHUOYAN ER300D User Manual
ER300D
User Manual
Version
2
.0 Page
1 of 8
Nov
2017
RfidLoginer
Strike the keyboard for you when it sniffing the tag UID
No Programming Required!
No Software Required!
Just Plug and Play!
Can detect UID cloned card
Applications:
1) Employee identification
2) Time and attendance
3) Form filter to existing software applications
4) Library, Hoteling, meeting attendance, visitor attendance
5) Secure printing
6) Point of sale
7) Membership applications
ER300D
User Manual
Version
2
.0 Page
2 of 8
Nov
2017
Ordering information:
Model No.: ER300D
Contact Information:
EHUOYAN Co., Ltd.
Tel: +86 -010-80128328
SKYPE: ehuoyan-rfid
email: info@ehuoyan.com
WebSite: http:/www.ehuoyan.com
1．Special Features
Can detect UID cloned card
Contactless USB smart card reader
Act as a HID keyboard device
Supported card: MIFARE
®
1k(S50), MIFARE®4k(S70), s20
Output 10 digits Card serial number, UID only
No programming required
Built in transceiver antenna
Frequency: 13.56 MHz
Typical time to read cards：<100ms
Communication interface: USB
Power supply ：DC
5V,
BUS power
Dual LED indicator and buzzer
Support OS: Windows, Mac OS, Linux, Android, iOS
Mechanic and environmental characteristics:
- Dimensions: 120 ×80×16 (mm)
- Operating temperature: -10 ~50 ℃
- Storage temperature: -20~70 ℃
- Relative humidity: up to 95%
- Weight: 100g
2. Output mode
The ER300D is a RFID reader which can read Mifare one s20, s50 and s70
RFID tags. This reader acts as a USB HID keyboard device.
ER300D
User Manual
Version
2
.0 Page
3 of 8
Nov
2017
When ER300D is deployed, no software is needed. It uses standard USB
drivers supplied by the operating system such as Windows, Macintosh and
Linux.
The ER300D reader can read the supported cards and print the card’s serial
number as 10 digits(Decimal format) and then end with “Enter” Key.
If the reader detects a cloned UID card, it will beep 2 sounds but will not
output data.
The reader will read the UID of the card and translate it to decimal from
hexdecimal.
Loading...