EHRET PROVENCE Installation Instructions Manual
Folding shutter
Installation instructions
INSTALLATION BY
SPECIALIST PERSONNEL
Valid from 09.2011
E 911.5
2
These installation instructions describe the in-
stallation and commissioning of EHRET folding
shutters.
These installation instructions are a component
These installation instructions are to be passed
along in the event of the sale of this product.
These instructions are addressed to qualifi ed
specialist personnel. Qualifi ed specialist per-
sonnel are persons who are familiar with the
transport, set-up, installation, commissioning
and operation of the product and who have ap-
standards and/or guidelines.
This product complies with the general rules of
technology. Safety-conscious behaviour is nec-
to commissioning. Observe the specifi ed pro-
cess steps and take into account the notes and
technically impeccable implementation of the
given safety notes and warnings are prerequi-
sites for safe and proper operation of the fold-
of commissioning and utilisation lead to the
tion instructions not be absolutely clear, it is es-
sential that you contact the specialist personnel
at EHRET GmbH, 77972 Mahlberg (Germany).
ommendations only and may vary depending
on the substrate!
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
EC Declaration of Conformity
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A
– without opener
Scope of delivery
8
Installation steps
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scope of delivery
Installation steps
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scope of delivery
32
Installation steps
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34
Scope of delivery
40
Installation steps
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42
4
Warning notes
DANGER
Designates an imminent danger that
could lead to death or severe injuries if
the respective precautionary measures
are not implemented.
WARNING
Means that death, severe bodily injury or
Means a possible danger that could lead
to minor injuries or property damage if it
Directives for action
carry out installation and commissioning!
WARNING
vere injuries and/or damage to property.
WARNING
Take into account the following notes
and warnings in order to avoid dangers
and to protect the product.
Observe the accident prevention regulations
of the Accident Prevention & Insurance As-
sociation.
Observe the rules of the road during trans-
Make sure that the load is well-secured on
the means of transport.
Cordon off a generously large area around
the installation site.
Observe without limitation the regulations
of the manufacturers of dowel and fi tting
The mounting bases of the installation site
are to be checked for load-bearing capacity
In the event of uncertainties about the
Check the product for damage prior to instal-
No personnel or obstacles are permitted to
ters have reached their fi nal position.
Do not reach into moving parts or closing
areas while shutters are opening or closing.
Make sure that no articles of clothing or
Ice could form on the product in the event of
snowfall, sleet or icy rain. Do not operate
fore any wind load occurs.
The shutters may not be operated at wind
speeds from 62 km/h (stormy wind).
jects are permitted to have an effect on the
shutters.
WARNING
the product!
Due to the weight of the products,
transport and installation must be car-
Transport the product carefully in order to
avoid damage.
Take care to ensure that the product is not
damaged when the packaging material is re-
WARNING
foil.
The packaging foil must be kept out of
Store the foil carefully until you turn it
Turn the packaging materials in for recycling.
EC Declaration of Conformity
The manufacturer:
EHRET GmbH
Aluminium shutters
Bahnhofstrasse 14 - 18
77972 Mahlberg, Germany
specified above.
The following harmonised standards have been applied in full:
Shutters – Performance requirements including safety
Andreas Schnaase
Which parts have been delivered?
Which means of attachment are being used?
cluded in the scope of delivery!
on the mounting bases on hand, the load-
tation the regulations of the manufacturers of
dowel and fitting materials.
WARNING
to property.
Select the means of attachment in ac-
cordance with the load-bearing capacity
of the mounting bases.
fastening frame?
which is divided into two parts and inserted
gliders into the mounted guide rail.
same way and park it next to the first pack-
age.
screw it into place.
of the slat packages on to the lateral frame
What is to be taken into account with the
function check?
A
– without opener
– without opener
4× Ø 4
6× M5S38
8
2×
6×
4×
4×
S4
S5
Tor x 20
S1S225
– without opener A
Accessories for barrier-free
version
Size 3
Tools required*
Installation material to be provided by the
customer!
INFO
A
– without opener
1 Assembling the standard fastening frame
. . . . . . . . . . . . . . . . . . . . . . . . . .
2 Assembling the barrier-free fastening frame (optional)
3 Fastening in the reveal
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Dismounting the guide rail
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Hanging the slat packages in place
6 Mounting the guide rail
7 Fastening the slat packages
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 Mounting the centre lock
9 Mounting the plastic spring
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 Mounting the top and bottom inlet brackets
11 Setting the locking blocks
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12 Setting the retaining brackets
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13 Fastening the barrier-free retaining bracket (optional)
. . . . . . . . . . . . . . . . . . . .
2× S3
6×
2×
– without opener A
Assembling the standard fastening frame
Sliding block
Sliding block
Size: 3
2× sliding block
2× sliding block
6× S1
4× S4
4× S5
2×
S4
S5
S5
S4
A
– without opener
Assembling the barrier-free fastening frame (optional)
Sliding block
Size: 3
– without opener A
3
Fastening in the reveal
customer!
A
– without opener
Dismounting the guide rail
Dismount half of the guide rail.
5
Hanging the slat packages in place
Insert the slat package into the bottom guide (pay attention to whether it is the left or right pack-
age).
Lift the slat package and hang it in place in the guide rail.
Move the package to its end position and hang the second slat package in place.
and move it!
the glider!
8× S2
– without opener A
6
Mounting the guide rail
Reinstall the guide profi le.
Push the slat package up to the lateral frame profi les,
then open the fastening profi les as illustrated in the diagram.
7
Fastening the slat packages
Drill the slat packages and screw them on to the side parts.
Loading...