2
GENERAL INFORMATION
The EHC eco SAVE heater has a special aluminium cast body designed to maximize the rate of
convected and radiated heat through the circulation channels providing an efcient comfortable
heating experience. The heaters are lled with a high performance heating oil in a unique way that
provides a bubble free process to ensure that the heaters entire surface area is covered.
The eco SAVE heater has an inbuilt programmer that allows you to set the heater times and
temperatures locally or when connected with the eco SAVE Smart Gateway allows you to set your
heaters remotely via the internet.
Designed and fabricated in accordance with EN 60335-1, EN 60335-2 and EN 55014 (regulations
for domestic appliances).
Standard colour White (RAL 9016).
Class I.
Wall mounted (by quick xing system).
Capillary over temperature safety limiter.
Overheat protection.
On-off main switch.
Key-pad locking (anti-tamper).
NTC electronic sensor.
Fitted with mains power cable 1300mm long.
Important Information - Safety notes regarding the appliance.
Due to the surface of the heater becoming hot, it must not be positioned directly against or below
ammable surfaces.
Do not dry clothes or towels on the heater nor leave fabrics, magazines, spray cans, volatile
substances or similar objects within 250mm of the heater.
In case of breakdown or damage turn off the appliance at the main On / Off switch and notify the
supplier.
If the electricity cable gets damaged it must only be replaced by a technician appointed by the
supplier. This will avoid possible risks and ensure that special tools are available if needed.
This appliance is not intended to be used by persons (incl. children) with limited physical, sensory
or mental capabilities, or who lack experience, except for those under supervision or have received
instruction in the use of the appliance from a person responsible for their security.
Children must be supervised in order to ensure that they do not play with the appliance.
WARNING: In order to prevent overheating, do not cover this appliance. There has to be free
movement of air around all surfaces of the appliance.
Main components
Heating Elements. A high quality mono-tube heating element is used with all eco SAVE Heaters. It is
connected to the radiators electronic control system that allows the heater to either be set manually or
remotely via the Internet when using the eco SAVE Smart Home system.
The radiator also has an ON - OFF power switch on the side of the heater for easy isolation.
This symbol “DO NOT COVER”, is placed on the heater as a reminder to
the user.