Ehang GHOSTDRONE 2.0 Instruction manual

OPERATING MANUAL

GHOSTDRONE 2.0

GHOSTDRONE 2.0 Operating Manual

includes packing list, assembly, parts

and specification information.

Congratulations on purchasing your new GHOSTDRONE 2.0!

For customer service and support, please e-mail [e-mail]

or contact our customer service hotline: [phone].

www.ehang.com

www.twitter.com/theghostdrone
www.facebook.com/theghostdrone
www.instagram.com/theghostdrone

forum.ehang.com

Thank you, and enjoy your GHOSTDRONE!

English

Business Hour: Monday – Friday 10:00 A.M – 6:00 P.M (PST)

Customer Service Phone: [phone]

Customer Service Email: [e-mail]

ENTERPRISE STANDARD: Q/ EHT 001-2017

EHang, Inc. reserves the right to interpret this Operating Manual.

www.ehang.com

GHOSTDRONE 2.0

TABLE OF CONTENTS

Warning

Warning --------------------------------------------------03

Introduction

Diagram ------------------------------------------------- 05

Packing List ---------------------------------------------05

Assembly

Propellers -----------------------------------------------06

Propeller Guards ---------------------------------------08

Accessories

Smart Flight Battery -----------------------------------09

G-BOX ---------------------------------------------------14

LED Indicator Light Instructions ----------------------16

Specifications

Specifications ------------------------------------------17

App Download

App Download -----------------------------------------19

Supported Device Requirements -------------------19

FAQ

FAQ ----------------- -----------------------------------20

WARNINGS

Before flying, please consult flight documentation from the International Civil Aviation
Organization (ICAO) and Federal Aviation Administration (FAA) regarding unmanned
aircraft operation. The user is responsible for his or her actions and any ensuing con­sequences. Users are hereby advised that they are liable for the use of the GHOST­DRONE and any and all liability is solely theirs. Please fly responsibly.

1. If you are flying your GHOSTDRONE 2.0 for the first time, please fly it in an open area
in order to experience its various functions safely.

2. DO NOT fly in restricted air zones.

3. DO NOT fly near obstacles, people, power lines, trees, above waters or any other
environments which are not safe for flying.

4. The copter may not fly properly near tall buildings and metal structures due to GPS
interferences.

5. DO NOT fly in or around congested electromagnetic (EM) environments. The copter
must be kept at least 200 m (656 ft.) away from strong EM source to operate properly.
EM interference can cause a loss of communication with the copter and result in
damage to properties or hurting other people.

6. Do not fly the copter in adverse weather conditions, including extreme temperatures,
heavy snow, strong wind, storm or fog.

7. It is recommended to always retain line-of-sight with the copter during flight. Losing
sight of the copter may result in accidents.

8. GHOSTDRONE is not suitable for use by children under 14 years of age. Adult super­vision is required if the copter is operated by children.

9. Please make sure battery life of your mobile device, G-BOX, VR goggles, smart flight
battery is sufficient before flying.

10. Stand clear of the copter (at least 5m or 16 ft.) with its head facing away from you
when ready to fly.

11.Compass calibration must be done following the instructions on the App if the triangle
icon shown in the App indicating the copter’s facing is largely different from the
copter’s actual facing. If the difference is still very obvious after calibration, please
choose a new environment for flying.

03

12. Propeller guards must be installed when flying indoors. EHang will not be liable for
any accidents caused by not installing the propeller guards. However, guards are not
recommended to be installed when flying in outdoor environments, the extra load and
wind resistance of installing the guards might have negative influences on flying experi­ences.

13. To avoid injury, DO NOT approach or touch the propellers or motors while they are
spinning.

14. Keep the G-BOX / VR goggles within your 3 meter’s radius during flight. DO NOT put
the G-BOX / VR goggles on the floor or in the pocket. If the G-BOX or the VR goggles is
not near you, you may lose connection with the copter.

15. Please keep an eye on the copter’s battery life showed on the App interface. We
strongly suggest land the drone when the battery is low.

16. Please tap Hover button in case of any emergencies. The copter will stop moving
and hover at its current position. If fail to hover, please secure your personal safety first.

17. DO NOT fly in Avatar manual mode when you fly your GHOSTDRONE for the first
time. It is important for you to familiarize yourself with the Avatar manual mode to ensure
flight safety. In Avatar manual mode, the copter flies only using gyroscope and acceler­ometer, other sensors are not used in this mode. This mode is safe but users need to
control every movement of the copter. If you are flying Avatar manual mode for the first
time, to ensure precise manual operation, please fly the copter in open area and only use
this mode at over 30 m’ s height.

04

INTRODUCTION

With dual-sensor flight controller and high efficiency dynamic system, GHOSTDRONE 2.0
secures safer and more stable flight. Its smart battery LCD screen displays real-time battery
status information. You will experience lots of fun flying with the GHOSTDRONE 2.0, you can

also purchase our compatible gimbal and camera to enjoy the pleasures in aerial video
shooting.

Diagram

Front Indicator Light

Copter Indicator Lights

Smart Flight Battery

Motor

Copter Body

Propeller

Landing Gear

Packing List

Copter ×1 Propeller ×8 Propeller Guard ×4

Power Adapter ×1

Info Package ×1

Note:
The tool kit contains a USB charging cable, a battery charging cable, a wrench, a screw driver and

15 screws.
The USB cable is used to charge the G-BOX as well as connecting the GHOSTDRONE to a PC to

update the copter’s firmware.

Tool Kit ×1G-BOX ×1

05

ASSEMBLY

Copter Install the

Install the

propellers

propeller guards

Completed

Assembly

Propellers

GHOSTDRONE 2.0 uses 2-bladed 8.5-inch self-tightening propellers. Propeller nuts have two
colors, silver and black. Each indicates different rotating directions.

Legends

LOCK: Tighten the propeller in this direction.

UNLOCK: Remove the propeller in this direction.

Installation

1. Put the copter upside down on soft surface to avoid scratches.

2. Match the silver nut propellers with the L motors (with silver motor shaft), and tighten the propellers
according to the LOCK instructions.

06

3. Attach the black nut propellers to the R motors in the same way.

Disassembling

Keep the motor deadlocked in place with one hand and remove the propeller according to the
UNLOCK instructions.

Warning

1. Check that the propellers and motors are installed correctly and firmly before each flight.

2. It is necessary to check that all propellers are in good condition before take-off.

3. DO NOT use any aged, deformed or damaged propellers.

4. To avoid injury, DO NOT approach or touch the propellers or motors while they are spinning.

5. For a better flight experience, please use EHang proprietary propellers.

6. For a better and safer flight experience, please use original EHang propellers. EHang does
not offer warranty for propellers. If you need to replace your propellers, please go to our
website www.ehang.com

07