EHA Transprint HP 2010 User Manual

EHA Transprint HP 2010

Chapter: User manual Version: 01 Date: 02-12-2016
File: BAL-QS-004/ENG Page 1 of 23 Release: M. Klein

EHA Hoffmann International GmbH

User manual EHA-TRANSPRINT HP 2010
Machine-No.: Year:

EHA Hoffmann International GmbH

Michelsbergstraße 24
D-57080 Siegen
Telephone: [phone] - 0
Telefax: [phone]
E-mail: [e-mail]

EHA Transprint HP 2010

Chapter: User manual Version: 01 Date: 02-12-2016
File: BAL-QS-004/ENG Page 2 of 23 Release: M. Klein

EHA Hoffmann International GmbH

User manual EHA -Transprint HP 2010

All technical and technological information included in this user manual as well as any
drawings and technical specifications made available remain the property of EHA Hoffmann
International GmbH. They shall not be used (other than for the operation of this product),
copied, reproduced, transmitted or disclosed to third parties without our prior written
consent

EHA Hoffmann International GmbH

Michelsbergstraße 24
D-57080 Siegen
Telephone: [phone] - 0
Telefax: [phone]
E-mail: [e-mail]

 2016 EHA Hoffmann International GmbH

EHA Transprint HP 2010

Chapter: User manual Version: 01 Date: 02-12-2016
File: BAL-QS-004/ENG Page 3 of 23 Release: M. Klein

CONTENTS

1 TYPE DESCRIPTION 5

1.1 Introduction 5

1.1 Technical specifications .............................................................................. 6

2 SAFETY 7

2.1 Obligations of the owner ............................................................................... 7

2.2 Obligations of the personnel ......................................................................... 7

2.3 Dangers caused by operation of the machine .............................................. 7

2.4 Intended use ................................................................................................ 8

2.5 Safety features ............................................................................................. 8

2.6 Informal safety measures ............................................................................. 8

2.7 Machine operating system ........................................................................... 8

2.8 Safety measures for normal operation ......................................................... 9

2.9 Dangers caused by electricity ...................................................................... 9

3 MACHINE DESCRIPTION 10

3.1 Description of Main components………………………………………………..10

4 TRANSPORT 11
5 INSTALLATION 11

5.1 Installation area requirements .....................................................................11

5.2 Installation ...................................................................................................12

5.3 Installation of the power supply ...................................................................12

6 GENERAL OPERATION 13

6.1 Start up ........................................................................................................13

6.2 Insert foil ......................................................................................................14

6.3 Prerequisites vehicle number plates ............................................................15

6.4 Hot stamping - normal operation ……………………………………………..15

6.5 Changing the foil .........................................................................................15

6.6 Powering down the machine …………………………………………………...15

6.7 Unwind brake ……………………………………………………………………16

6.8 Changing the hot-stamping pressure …………………………………………16

6.9 Control Panel ..............................................................................................18

6.10 Activate Control Panel .................................................................................19

6.11 Changing the temperature setting ...............................................................21

6.12 Bridging the timer .......................................................................................21

6.13 Changing the display language ..................................................................22

6.14 Error messages ...........................................................................................22

7 MAINTENANCE 23

7.1 Cleaning ......................................................................................................23

7.2 Annual Inspection ........................................................................................23

7.3 Replacing the fuse ………………………… …………………………………23

EHA Transprint HP 2010

Chapter: User manual Version: 01 Date: 02-12-2016
File: BAL-QS-004/ENG Page 4 of 23 Release: M. Klein

1 TYPE DESCRIPTION

The EHA Transprint HP2010 is a machine specially built for high quality hot stamping by
means of heat and pressure.

The machine has been developed to be used exclusively for the hot stamping of designated
vehicle number plates with embossed edges.

Identification

The machine has a type plate, a typical example is shown below. The type plate is located

on the side of the machine..

1.1 Introdruction

This user manual refers to the EHA Transprint HP2010. It contains information that is
important and useful for the proper operation and maintenance of the machine. In addition it
contains important instructions to prevent accidents and serious damage prior to and during
usage of the machine and it allows the machine to perform as safely and flawlessly as
possible. Read this manual carefully before starting the machine, familiarize yourself
thoroughly with the functioning of the machine and strictly follow the directions given.

If you have any questions or need more detailed information on specific aspects of the
machine, please do not hesitate to contact EHA Hoffmann International GmbH.

EHA Transprint HP 2010

Chapter: User manual Version: 01 Date: 02-12-2016
File: BAL-QS-004/ENG Page 5 of 23 Release: M. Klein

Liability

The data included in this manual is based on the latest information available at the time of
writing. It may be subject to future changes.

We reserve the right to make changes to the design and / or construction of our products
without being obligated to adapt previously supplied machines.

Warranty

The warranty conditions that apply for this product are stated in the terms of delivery.
The warranty on your equipment will become null and void if:

 Service and maintenance are not carried out strictly in accordance with the

instructions, repairs are not carried out by authorized personnel or have been made
without our consent;

 the machine has been modified without our consent;
 non-original parts have been used;
 the equipment is used inexpertly, incorrectly, carelessly or not accordance with its

nature or intended use.
The warranty does not cover wearing parts.
The pressure roller has been coated with a high quality silicone rubber which ensures

excellent anti-stick properties. The durability of the silicone rubber is highly dependent on
the used materials. Therefore the warranty does not include the silicone coating of the
pressure roller.

Safety

Familiarize yourself with the pictograms (also see chapter 2: Safety).
The equipment is provided with safety and protection features. Even so, caution is required

when performing machine operations. Warning pictograms in the various chapters point to
potential dangers. You will find these pictograms near the text referring to the operations
that involve risks.

EHA Transprint HP 2010

Chapter: User manual Version: 01 Date: 02-12-2016
File: BAL-QS-004/ENG Page 6 of 23 Release: M. Klein

Work safely!

EHA Hoffmann International GmbH had made every effort to inform you as correctly and
completely as possible on any dangers associated with the operation of the machine. You
must ensure and are responsible for compliance with these behavioural guidelines.
The buyer/user is obliged to familiarize operating, cleaning and maintenance personnel with
these instructions. After the instruction by the vendor / supplier, the purchaser must carry

out independent instructions when changing the operating personnel.

Upon their arrival, check deliveries for:
► Any damage and/or missing parts due to transport. Make sure that the carrier draws up a
transport damage report on the spot.
► Correctness and completeness; have all parts (additionally) ordered been supplied?

In case of damage, always contact EHA Hoffmann International GmbH.

1.2 Technical specifications EHA Transprint HP 2010

Dimensions / Weight
Machine:

Depth 530 mm (20,9”)
Höhe 920 mm (36,2”)
Width 550 mm (21,7“)
Net weight 75 kg

Power supply :

Power supply 230V, 50/60 Hz, 16A
Heating power 1300W
Motor power: 90W
Foil winding power: 60W
Temperature Control 0 - 220°C

Operating speed :
Maximal 5 m/min (16.4 ft/min)

Working width:

Maximal 120 mm (4,7”)
Shaft capacities :

Core diameter 25.4mm (1”)
Noise level : ≤ 70 dB (A)

EHA Transprint HP 2010

Chapter: User manual Version: 01 Date: 02-12-2016
File: BAL-QS-004/ENG Page 7 of 23 Release: M. Klein

2 SAFETY

The EHA Transprint HP 2010 is provided with safety equipment to ensure safe machine
operation. You should, however, take due note of the following:

Danger of getting injured by hot parts.

Be careful with hot parts to avoid burns. The heated roller may have a
surface temperature of 220°C. Do not touch the rollers. Even after the
machine had been switched off, the roller will remain hot for a long time.

Danger of getting injured by rotating parts.

The machine is provided with a cover (protection cage) which are designed to
prevent contact with rotating parts. Make sure that this safety device is
always installed during operation of the machine.

Danger of getting injured by voltage.

Do not remove the back panels of the EHA Transprint HP2010, you may get
injured by voltage. Only remove the panels to carry out maintenance. In this
case be sure that the machine is de-energized.

Do not place heavy objects on the power supply cord.

2.1 Obligations of the owner

The owner of the machine has to make sure that the only people allowed to work with and
on the machine have understood and confirmed by their signature the basic regulations on
workplace safety and accident prevention. The owner will make sure that the personnel is
trained in the handling of the machine and have been familiarized with the operating and
safety instructions contained within this manual. The safety awareness of personnel shall
be reviewed at regular intervals.

2.2 Obligations of the personnel

All individuals working with and on the machine commit, and confirmed by their signature,
to be familiar with the basic regulations on workplace safety and accident prevention and
have read the section on safety contained within this manual.