Ego Power+ CHX5500 Operator's Manual

OPERATOR’S MANUAL
56-VOLT
Français p. 21
CHARGER
Español p. 41
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
MODEL NUMBER CHX5500
TABLE OF CONTENTS
FCC Statement .......................................... 4
Safety Symbols ......................................... 5
Safety Instructions .....................................6-10
Introduction ........................................... 10
Specications ......................................... 11
Packing List ........................................... 11
Description ........................................... 12
Operation ...........................................13-15
Maintenance .......................................... 16
Troubleshooting ........................................ 17
Warranty ...........................................18-19
READ ALL INSTRUCTIONS!
READ & UNDERSTAND OPERATOR’S MANUAL
This battery charger has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.
WARNING:
and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
Lead from lead-based paints,
Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemical: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to lter out microscopic particles.
Some dust created by power sanding, sawing, grinding, drilling
56 VOLT CHARGER — CHX5500 3
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTICE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
56 VOLT CHARGER — CHX55004
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
WARNING:
Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,” and “CAUTION” before using this tool. Failure to follow all instructions listed below may result in electric shock, re, and/or serious personal injury.
for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
Be sure to read and understand all safety instructions in this
WARNING:
foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend a Wide Vision Safety Mask
The operation of any power tools can result in
56 VOLT CHARGER — CHX5500 5
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate.
Safety Alert Precautions that involve your safety.
Read & Understand Operator’s Manual
Eye Protection
Wet Conditions Alert
Construcción clase II
V Volt Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
To reduce the risk of injury, user must read and understand operator’s manual before using this product.
Always wear safety goggles or safety glasses with side shields and a full face shield when operating this product.
Do not expose to rain or use in damp locations.
Double-insulated construction
56 VOLT CHARGER — CHX55006
W Watt Power
min Minutes Time
Direct Current Type or a characteristic of current
WARNING:
listed below may result in electric shock, re and/or serious personal injury. The term “power tool” in all of warnings listed below refers to corded power tools or battery operated (cordless) power tools.
Read and understand all instructions. Failure to follow all instructions
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
ELECTRICAL SAFETY
Avoid body contact with grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded power tools. Unmodied plugs and matching outlets will reduce the risk of electric shock.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
56 VOLT CHARGER — CHX5500 7
Use charge the EGO lithium-ion battery pack list below:
CHARGER BATTERY PACK
CHX5500 BAX1500, BAX1501
SERVICE
Have your charger serviced by a qualied repair person using only identical replacement parts. This will ensure that the safety of the charger is maintained.
When servicing a charger, use only identical replacement parts. Follow instructions in the maintenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance instructions may create a risk of shock or injury.
SAFETY RULES FOR CHARGER
CAUTION:
battery, charge only those lithium-ion rechargeable batteries specically designated on your charger’s label. Other types of batteries may burst, causing personal injury or damage.
Do not use the charger outdoors or expose it to wet or damp conditions.
Water entering the charger will increase the risk of electric shock.
Do not handle charger, including the charger plug and charger terminals with wet hands.
Use of an attachment not recommended or sold by the battery-charger manufacturer may result in a risk of re, electric shock, or injury to persons.
Recharge only with the charger specied by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of re when used with another battery pack.
Do not abuse the cord or charger. Never use the cord to carry the charger. Do not pull the charger cord to disconnect the plug from a receptacle. Damage to the cord or charger could occur and create an electric shock hazard. Replace damaged cords immediately.
Make sure that the cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts, or otherwise be subjected to damage or stress. This will reduce the risk of accidental falls,
which could cause injury and damage to the cord, which could then result in electric shock.
To reduce the risk of electric shock or damage to the charger and
56 VOLT CHARGER — CHX55008
Keep the cord and charger from heat to prevent damage to housing or internal parts.
Do not allow gasoline, oils, petroleum-based products, etc. to come in contact with plastic parts. These materials contain chemicals that can damage,
weaken, or destroy plastic.
Do not operate the charger with a damaged cord or plug, which could cause shorting and electric shock. If damaged, have the charger repaired or replaced
by EGO authorized dealer/distributor.
Do not operate the charger if it has received a sharp blow, been dropped, or has otherwise been damaged in any way. Take it to an authorized service
technician for an electrical check to determine if the charger is in good working order.
Do not disassemble the charger. Take it to an authorized service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or re.
Unplug the charger from the electrical outlet before attempting any maintenance or cleaning to reduce the risk of electric shock.
Disconnect charger from the power supply when not in use. This will reduce the risk of electric shock or damage to the charger if metal items should fall into the opening. It will also help prevent damage to the charger during a power surge.
Risk of electric shock. Do not touch the uninsulated portion of output connector or uninsulated battery terminal.
Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you lend this tool to someone else, also lend these instructions to them to prevent misuse of the product and possible injury.
IMPORTANT SAFETY INSTRUCTIONS
Save these instructions. This manual contains important safety and operating instructions for 56V Charger CHX5500.
Before using the battery charger, read all instructions and cautionary markings on the battery charger, the battery and the product using battery.
WARNING:
followed, including the following.
To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
When using electric appliances, basic precautions should always be
56 VOLT CHARGER — CHX5500 9
Only use attachments recommended or sold by manufacturer.
Do not use outdoors.
For a portable appliance – To reduce the risk of electrical shock, do not put charger in water or other liquid. Do not place or store appliance where or can fall or be pulled into a tub or sink.
CAUTION:
batteries. Other types of batteries may burst, causing personal injury or damage.
To reduce the risk of injury, charge only lithium-ion rechargeable
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Congratulations on your selection of the new EGO POWER+ 56V charger. It has been designed, engineered, and manufactured to give you the best possible dependability and performance.
Should you experience any problem you cannot easily remedy, please contact EGO customer service center 1-855-EGO-5656.
This manual contains important information on the safe assembly, operation, and maintenance of your product. Read it carefully before using the product. Keep this manual handy so you can refer to it at any time.
SERIAL NUMBER _____________________ DATE OF PURCHASE _________________ YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE
PLACE FOR FUTURE REFERENCE
56 VOLT CHARGER — CHX550010
SPECIFICATIONS
Charger Input 120V ~ 60Hz, 550W Charger Output
Charging Time (for BAX1500, BAX1501)
Recommended Ambient Temperature for Charging
Net Weight 3.1 lbs (1.4 Kg)
4A/8A 56V
3.5 h (in fast charging mode) 7 h (in standard charging mode)
41°F - 104°F (5°C - 40°C)
PACKING LIST
PART NAME QUANTITY
Charger 1 Power Cord 1 Operator’s Manual 1
56 VOLT CHARGER — CHX5500 11
DESCRIPTION
KNOW YOUR CHARGER (Fig. 1)
WARNING:
The safe use of this product requires an understanding of the information on the tool and in this operator’s manual, as well as knowledge of the project you are attempting. Before use of this product, familiarize yourself with all its operating features and safety rules.
1
Power Cord
LED Indicators (#1, #2, #3 LED)
Mode Button
Wall-Mounting Hole
Plug-in Socket
Power-Cord Socket
Cooling Air Port
LED INDICATORS: Indicate the charging status. There are three LEDs. #1 LED indicates fast charging, #2 LED indicates standard charging, and #3 LED indicates an abnormality during charging.
MODE BUTTON: For switching between standard and fast charging mode. WALL-MOUNTING HOLE: For convenient storage on the wall.
56 VOLT CHARGER — CHX550012
OPERATION
HOW TO CHARGE THE BATTERY PACK
WARNING:
outdoors or expose it to wet or damp conditions. Water entering the charger will increase the risk of electric shock.
NOTICE:
shipped partially charged. Before using it the rst time, fully charge the battery pack.
1. Insert the power cord into the corresponding socket in the charger (Fig. 2) and make sure that it is securely inserted.
2. Connect the charger power cord to an electrical outlet (120V ~ 60Hz). The three LED indicators on the charger will briey shine simultaneously, indicating that the charger is working correctly.
3. Insert the backpack battery plug into the plug-in socket in the charger (Fig. 3 & 4). The charger will communicate with the battery to evaluate the condition of the battery.
Do not use the charger
Lithium-Ion battery packs are
2
3
4
Power Cord Socket
Power Cord
Plug-in Socket
Battery Plug
Mode Button
#3 LED #2 LED #1 LED
56 VOLT CHARGER — CHX5500 13
4. When the battery is charged in the standard charging mode, the #2 LED will ash green.
5. Press the mode button for at least 1 second and the standard charging mode will switch to the fast charging mode. The #2 LED will turn off and the #1 LED will ash green.
6. When the battery is fully charged, the #1 or the #2 LED will stop ashing green and will shine green continuously. The power indicator on the battery will turn off. Remove the battery plug from the charger and disconnect the charger from the
electrical outlet.
NOTICE:
A signicantly reduced run time after fully charging the battery pack indicates that the batteries are near the end of their usable life and must be replaced.
The charger may warm during charging. This is part of the normal operation of the charger. Charge in a well-ventilated area.
LED INDICATOR BATTERY PACK
Defective
Standard
Over tem­perature
Standard charging 4A Charging
Fast charging
Full Charged
Self-maintenance All LEDs Shine briey.
:On :Off :Flashing
NOTE:
charging
Fast charging
Standard charging
Fast charging
LED ON THE CHARGER
#1 LED #2 LED #3 LED
or
Battery or charger is defective
Charging will begin when the battery returns to normal temperature.
8A Charging
Charging is completed
ACTION
56 VOLT CHARGER — CHX550014
CHARGING A HOT OR COLD BATTERY PACK
If the battery pack is out of the normal temperature range, the #3 LED will shine RED and the corresponding LED (#1 for fast charging; #2 for standard charging) will ash green. When the battery pack cools down to approximately 135°F (57°C) or warms to more than 37°F (3°C), the charger will automatically begin charging and the corresponding LED will shine normally.
DEFECTIVE BATTERY PACK OR CHARGER
1. If the charger detects a problem, the #3 LED will begin ashing RED or all the LEDs will turn off.
2. If registering as defective, remove and reinsert the battery pack plug into the charger. If the LEDs still read “defective” a second time, try charging a different battery pack.
3. If a different battery pack charges normally, dispose of the defective battery pack (refer to the instructions in the battery pack manual).
4. If a different battery pack also indicates “defective”, reattach the charger with the electrical outlet. If no charger LEDs shine briey simultaneously for self­inspection at the reconnecting moment or the #3 LED on the charger when battery is mounted on still displays defective, the charger may be defective.
WALL-MOUNTING HOLES
The charger has hanging holes for convenient storage (see Fig.1). Install screws in the wall 3 inches (76.2 mm) apart.
56 VOLT CHARGER — CHX5500 15
MAINTENANCE
WARNING:
other parts may create a hazard or cause product damage. To ensure safety and reliability, all repairs should be performed by EGO authorized dealer/distributor.
WARNING:
and disconnect the charger from the power supply when cleaning or performing any maintenance.
When servicing, use only identical replacement parts. Use of any
To avoid serious personal injury, always remove the battery pack
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloth to remove dirt, dust, oil, grease, etc.
WARNING:
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
Do not at any time let brake uids, gasoline, petroleum-based
56 VOLT CHARGER — CHX550016
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Charger doesn’t work. #3 LED ashes RED or all the LEDs turn off.
Charger doesn’t work and #3 LED shines red.
Battery pack or charger
is defective or bad connection between the battery pack and charger.
Switching on or off
of the charger is too frequent.
Battery pack is too hot
or too cold.
1. Try to remove and reinsert the battery plug in the charger.
2. Try charging a different battery pack.
3. Unplug and reattach the charger with the electrical outlet, referring to the section
“DEFECTIVE BATTERY PACK OR CHARGER” in
this manual.
Unplug the charger
and wait at least 30s until all LEDs turn off and then reconnect the charger with the electrical outlet.
Allow the battery
pack to reach normal temperature. Charging will begin when battery pack returns to 37°F(3°C)-135°F(57°C).
56 VOLT CHARGER — CHX5500 17
WARRANTY
EGO WARRANTY POLICY
5-year limited warranty on EGO POWER+ outdoor power equipment and portable power for personal, household use.
3-year limited warranty on EGO POWER+ System battery packs and chargers for personal, household use.
2 year/1year limited warranty on EGO outdoor power equipment, portable power, battery packs, and chargers for professional and commercial use.
The detailed warranty periods by products can be found online at http://egopowerplus. com/pages/warranty-policy.
Please contact EGO Customer Service Toll-Free at 1-855-EGO-5656 any time you have questions or warranty claims.
LIMITED SERVICE WARRANTY
EGO products are warranted against defects in material or workmanship from the date of original retail purchase for the applicable warranty period. Defective product will receive free repair.
a) This warranty applies only to the original purchaser from an authorized EGO
retailer and may not be transferred. Authorized EGO retailers are identied online at http://egopowerplus.com/pages/warranty-policy.
b) The warranty period for reconditioned or factory certied products used for
residential purpose is 1 year, for industrial, professional or commercial purpose is 90 days.
c) The warranty period for routine maintenance parts, such as, but not limited
to, blades, trimmer heads, chain bars, saw chains, belts, scraper bars, blower nozzles, and all other EGO accessories is 90 days for residential purpose, 30 days for industrial, professional or commercial purpose. These parts are covered for 90/30 days from manufacture defects in normal working conditions.
d) This warranty is void if the product has been used for rental purpose.
56 VOLT CHARGER — CHX550018
Loading...
+ 42 hidden pages