EGO LM2100E, LM2100E-SP Operator's Manual
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
OPERATOR’S MANUAL
56 VOLT LITHIUM-ION
CORDLESS MOWER
MODEL NUMBER LM2100E/LM2100E-SP
2. Self-propel Trigger
1. Safety Button
19. Mulching Insert
15. Side Rail
16. Self-propel
Speed-control Lever
17. Bail Switch
(Switch Lever)
18. Handle
14. Quick-adjust
Lever
13. Grass Bag
10. Cutting-height
Adjustment Lever
11. Mower Deck
12. Rear Wheel
9. Front Wheel8. Front Handle
7. LED Headlights
6. Battery-pack Cover
5. Rear Handle
4. Rear Discharge Door
3. Handle-locking Clamp
A
B
20. Support
for Upright
Storage
21. Trailing Shield
C
22. Switch Button for LED Headlights
23. Power Indicator
1
2
D
F
J
E
G
Quick-adjust Lever
H I
2
1
K
Locked storage
position
Lower operating
position
Grass bag attach-
ment/removal position
Middle operating
position
Upper operating position
2 31
L
N
P
R
M
O
Q
1
2
1
2
S
Safety Key
Safety Key Slot
Battery-release
Button
THIS SIDE FACING GRASS
W
THIS SIDE FACING GRASS
T
THIS SIDE FACING GRASS
X Y
THIS SIDE FACING GRASS
U
THIS SIDE FACING GRASS
V
Stabilizer 1
Stabilizer 2
14mm Wrench
Fan
Inner Flange
Blade
Bolt
Outer Flange
56 VOLT LITHIUM-ION CORDLESS MOWER — LM2100E/LM2100E-SP6
EN
READ ALL INSTRUCTIONS!
READ & UNDERSTAND
INSTRUCTION MANUAL
Residual risk! People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING: To ensure safety and reliability, all
repairs and replacements should be performed by a
qualied service technician.
Intended use & Foreseeable misuse: The product
is intended for mowing grass in domestic gardens only.
It must not be used to mow unusually high, dry or wet
grass, e.g. pasture grass; or to shred leaves. The product
is to be used only for its prescribed purpose. Any other
use is deemed to be a case of misuse.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to
possible dangers. The safety symbols and the explanations
with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate
any danger. The instructions and warnings they give are no
substitutes for proper accident prevention measures.
WARNING: Be sure to read and understand all
safety instructions in this Operator’s Manual, including
all safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to follow all
instructions listed below may result in electric shock, re,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER,
WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING: The operation of any power tools can
result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning
power tool operation, always wear safety goggles or safety
glasses with side shields and a full face shield when
needed. We recommend a Wide Vision Safety Mask for
use over eyeglasses or standard safety glasses with side
shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
Safety Alert
Precautions that involve your
safety.
Wear Eye
Protection
Always wear safety goggles
or safety glasses with side
shields and a full face shield
when operating this product.
WARNING:
Read Operator’s Manual
To reduce the risk of injury,
user must read and understand operator’s manual
before using this product.
Beware of
Sharp Blades.
Blades continue to rotate after
the motor is switched off – Remove disabling device before
maintenance. Switch off and
remove detachable battery
pack(or disabling device)
before adjusting or cleaning.
Keep Bystanders Away
Ensure that other people and
pets remain at least 30m
away from the mower when
it is in use.
Class II
Construction
Double-insulated
Construction.
64
NOISE dB
Noise
Guaranteed sound power
level.
IPX4 IP Symbol
Protection against ingress of
water degree 4
V Volt Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating
Current
Type of current
Direct Current
Type or a characteristic of
current
n
0
No Load Speed Rotational speed, at no load
... /min Per Minute Revolutions per minute
Loading...