and other construction activities contains chemicals known to the state of California
to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
Lead from lead-based paints,
Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemical: work in a well-ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to lter out microscopic particles.
Some dust created by power sanding, sawing, grinding, drilling
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger. The
instructions and warnings they give are no substitutes for proper accident prevention
measures.
WARNING:
Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to following all instructions listed below
may result in electric shock, re, and/or serious personal injury.
Be sure to read and understand all safety instructions in this
DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform the user of important information and/or instructions that could lead
to equipment or other property damage if they are not followed. Each message is
preceded by the word “NOTICE”, as in the example below:
NOTICE: Equipment and/or property damage may result if these instructions are not
followed.
WARNING:
foreign objects being thrown into your eyes, which can result in severe
eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and a full face shield
when needed. We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use eye
protection which is marked to comply with ANSI Z87.1.
This page depicts and describes safety symbols that may appear on this product.
Read, understand, and follow all instructions on the machine before attempting to
assemble and operate.
Safety AlertPrecautions that involve your safety.
Read &
Understand
Operator’s Manual
Long Hair
Loose Clothing
Eye Protection
Blower TubeDo not operate without tube in place.
Keep Bystanders
Away
Recycle Symbols
To reduce the risk of injury, user must read
and understand operator’s manual before
using this product.
Failure to keep long hair away from the air
intake could result in personal injury.
Failure to keep loose clothing from being
drawn into air intake vents could result in
personal injury.
Always wear safety goggles or safety glasses
with side shields and a full face shield when
operating this product.
Keep all bystanders at least 50 ft. away.
This product uses lithium-ion (Li-ion) batteries.
Local, state, or federal laws may prohibit
disposal of batteries in ordinary trash. Consult
your local waste authority for information
regarding available recycling and/or disposal
options.
When using an electrical appliance, basic precautions should always be followed,
including the following:
Ingress Protection
Degree
Cubic Feet Per
Minute
Direct CurrentType or a characteristic of current
Protection from splashing water
Air volume
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT!
WARNING:
qualied service technician.
WARNING:
Know your power blower. Read the instruction manual carefully. Learn
the blower’s applications and limitations, as well as the specic potential
hazards related to this blower. Following this rule will reduce the risk of electric
shock, re, or serious injury.
Do not allow the blower to be used as a toy. Close attention is necessary when
used by or near children.
Use only as described in this manual. Use only manufacturer’s
recommended attachments.
If the blower is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it to a service center.
Do not handle the charger, including charger plug, or charger terminals
with wet hands.
Do not put any object into any openings. Do not use with any opening
blocked; keep openings free of dust, lint, hair, and anything that may
reduce air ow.
Do not use on a ladder, rooftop, tree, or other unstable support. Stable footing
on a solid surface enables better control of the blower in unexpected situations.
Always take care of your feet, children, or pets around you when removing the
battery pack from blower. Serious injury could result if the battery pack falls.
NEVER remove the battery pack when in a high position.
Do not use the blower if switch does not turn it on or off. A blower that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the battery pack from the blower before making any
adjustments, changing accessories, or storing the blower. Such preventive
safety measures reduce the risk of starting the blower accidentally.
Turn off all controls before removing the battery.
DO NOT attempt to clear clogs from the unit without rst removing the battery.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the blower’s operation. If damaged,
have the blower serviced before using. Many accidents are caused by poorly
maintained blowers.
Keep the blower and its handle dry, clean and free from oil and grease. Always
use a clean cloth when cleaning. Never use brake uids, gasoline, petroleum-based
products, or any strong solvents to clean your blower. Following this rule will reduce
the risk of loss of control and deterioration of the enclosure plastic.
Always wear safety glasses with side shields. Everyday glasses have only
impact resistant lenses. They are NOT safety glasses. Following this rule will
reduce the risk of eye injury.
Always wear eye protection with side shields marked to comply with ANSI
Z87.1 along with hearing protec tion when operating this equipment.
Protect your lungs. Wear a face or dust mask if the operation is dusty.
Following this rule will reduce the risk of serious personal injury.
Protect your hearing. Wear hearing protection during extended periods of
operation. Following this rule will reduce the risk of serious personal injury.
Battery powered blowers do not have to be plugged into an electrical
outlet; therefore, they are always in operating condition. Be aware of
possible hazards when not using your battery powered blower or when
changing accessories. Following this rule will reduce the risk of electric shock,
Wear heavy long pants, long sleeves and boots. Avoid loose garments or
jewelry that could get caught in moving parts of the machine or its motor.
Do not operate the equipment while barefoot or when wearing sandals or
similar lightweight footwear. Wear protective footwear that will protect your
feet and improve your footing on slippery surfaces.
Do not incinerate the appliance even if it is severely damaged. The batteries
can explode in a re.
Batteries can explode in the presence of a source of ignition, such as a
pilot light. To reduce the risk of serious personal injury, never use any cordless
product in the presence of open ame. An exploded battery can propel debris and
chemicals. If exposed, ush with water immediately.
Keep rm footing and balance. Do not overreach. Overreaching can result in
loss of balance.
Check the work area before each use. Remove all objects such as rocks,
broken glass, nails, wire, or string which can be thrown by or become entangled
in the machine.
Do not point the blower tube in the direction of people or pets.
Never run the unit without the proper equipment attached. Always ensure
that the blower tube is installed.
When not in use, the blower should be stored indoors in a dry, secure place
out of the reach of children.
Keep all bystanders, children, and pets at least 50 ft. away.
Blower service must be performed only by qualied repair personnel.
Service or maintenance performed by unqualied personnel may result in a risk of
injury.
When servicing a blower, use only identical replacement parts. Follow
instructions in the Maintenance section of this manual. Use of unauthorized parts
or failure to follow Maintenance Instructions may create a risk of shock or injury.
Never use the blower near res or hot ashes. Use near res or ashes can
spread res and result in serious injury and/or property damage.
Never use blower to spread chemicals, fertilizers, or any other toxic
substances. Spreading these substances could result in serious injury to the
Never place the blower on any surface, except a hard, clean surface when
the engine is running. Gravel, sand, and other debris can be picked up by the air
intake and thrown at the operator or bystanders, causing possible serious injuries.
Do not expose a battery pack or tool to re or excessive temperature.
Exposure to re or temperature above 212 °F (100°C) may cause explosion.
Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. If you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product and possible injury.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Congratulations on your selection of the new 56V Lithium-ion powered blower. It
has been designed, engineered and manufactured to give you the best possible
dependability and performance.
Should you experience any problem you cannot easily remedy, please contact EGO
customer service center 1-855-EGO-5656.
This manual contains important information on to the safe assembly, operation and
maintenance of your product Read it carefully before using the product. Keep this
manual handy so you can refer to it at any time.
SERIAL NUMBER _____________________ DATE OF PURCHASE _________________
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP THEM IN A
The safe use of this product requires an understanding of the information on the tool and
in this instruction manual, as well as knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating features and safety rules.
1
Flat Nozzle
Tapered nozzle
Blower Tube
Tube-Release Button
Air-Speed TriggerStarts/stops the blower and adjusts the air speed
Speed/Lock-On DialStarts or stops the blower;
locks the blower at any speed
Boost ButtonAmplies the air velocity to the maximum
Battery-Release ButtonReleases the battery pack from the blower
Latch Locks the battery pack when installing it on the blower
Tube-Release ButtonReleases the tube from the blower
Tapered NozzleFurther concentrates the air ow and increases the air
speed
Flat NozzleFurther spreads the air ow and increases the cleaning
until the parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
recommended for use with this blower. Any such alteration or modication is misuse
and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
assembling parts, making adjustments, cleaning, or when the product is not in use.
If any parts are damaged or missing, do not operate this product
Do not attempt to modify this product or create accessories not
Always remove the battery pack from the product when you are
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from the box. Make sure that
all items listed in the packing list are included.
WARNING:
assembled to your product when you unpack it. Parts on this list are not assembled to
the product by the manufacturer and require customer installation. Use of a product
that may have been improperly assembled could result in serious personal injury.
Inspect the tool carefully to make sure no breakage or damage occurred during
shipping.
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
Do not use this product if any parts on the packing list are already
If any parts are damaged or missing, please return the product to the place of
2. Align the groove in the tube
with the knob on the blower
housing. Push the tube onto the
blower housing until the latch
snaps into place (Fig. 2 & 3).
3. To remove the tube, press and
hold the tube-release button
to disengage the latch, then
pull the tube straight from the
blower (Fig. 4).
2. Align the groove in the tapered
nozzle with the knob on the
tube. Push the nozzle onto the
tube until it snaps into place
(Fig. 5 & 6).
3. To remove the tapered nozzle,
press and hold the nozzlerelease button to disengage
the latch, then pull the nozzle
straight from the blower (Fig. 7).
Remember that a careless fraction of a second is sufcient to inict serious injury.
WARNING:
along with hearing protection. Failure to do so could result in objects being thrown into
your eyes and other possibly serious injuries.
WARNING:
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
Before each use, inspect the entire product for damaged, missing, or loose parts, such
as screws, nuts, bolts, caps,etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced.
Do not allow familiarity with this product to make you careless.
Always wear eye protection marked to comply with ANSI Z87.1,
Do not use any attachments or accessories not recommended by the
APPLICATION
You may use this product for the purposes listed below:
Clearing hard surface, such as driveways and walkways
Keeping decks and driveways free from leaves and pine needles
TO INSTALL/REMOVE BATTERY PACK (Fig. 8)
CHARGE BEFORE FIRST USE.
WARNING:
assembling parts, making adjustments, cleaning, or when not in use. Removing the
battery pack will prevent accidental starting that could cause serious personal injury.
Always remove the battery pack from the product when you are
TO INSTALL
Align the ribs of the battery pack with the mounting slots in the blower’s
battery port.
Press the battery pack into the battery port until it snaps into position.
TO REMOVE
WARNING:
when pressing the battery-release button. Serious injury could result if the battery pack
falls. NEVER remove the battery pack when in a high location.
Press the battery-release button; the battery pack will disengage from the latch
and the ejection mechanism will assist with removal.
Remove the battery pack from the blower.
Always take care to note the location of your feet, children, or pets
Depress the air-speed trigger to turn on the blower.
The air speed of the blower is controlled with the variable speed trigger. More
pressure on the trigger results in higher blowing speeds; less pressure on the
trigger results in lower blowing speeds. Adjust the speed to suit the task at hand.
Release the air-speed trigger to turn off the blower.
SPEED/LOCK-ON DIAL ONLY
The blower can be locked at any speed with the speed lock-on dial.
Turn the speed/lock-on dial clockwise to start the blower. The air speed will
increase as the dial is rotated clockwise.
To decrease the air speed, turn the speed/lock-on dial counterclockwise.
Keep turning the speed/lock-on dial counterclockwise to the off position to stop
the blower.
NOTICE: If the speed/lock-on dial is not turned back to the off position before the
battery is removed, the blower will not start when a fully charged battery is installed.
This is a protection feature to help prevent accidental startup. Depress the air-speed
trigger to deactivate the protection and start the blower.
Press the boost button while working to temporarily increase the air speed to the
maximum level. The blower will resume the previous speed when the boost button is
released.
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualied service technician.
WARNING:
from the product when cleaning or performing any maintenance.
When servicing, use only identical replacement parts. Use of any
To avoid serious personal injury, always remove the battery pack
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
Do not at any time let brake uids, gasoline, petroleum-based
STORAGE
Clean all foreign material from the air intakes of the blower.
Store the blower indoors in a place that is inaccessible to children. Keep it away
from corrosive agents, such as garden chemicals and de-icing salts.
5-year limited warranty on EGO POWER+ outdoor power equipment and portable power
for personal, household use.
3-year limited warranty on EGO POWER+ System battery packs and chargers for
personal, household use.
2 year/1year limited warranty on EGO outdoor power equipment, portable power,
battery packs, and chargers for professional and commercial use.
The detailed warranty periods by products can be found online at
http://egopowerplus.com/pages/warranty-policy.
Please contact EGO Customer Service Toll-Free at 1-855-EGO-5656 any time you
have questions or warranty claims.
LIMITED SERVICE WARRANTY
EGO products are warranted against defects in material or workmanship from the date
of original retail purchase for the applicable warranty period. Defective product will
receive free repair.
a) This warranty applies only to the original purchaser from an authorized EGO
retailer and may not be transferred. Authorized EGO retailers are identied online
at http://egopowerplus.com/pages/warranty-policy.
b) The warranty period for reconditioned or factory certied products used for
residential purpose is 1 year, for industrial, professional or commercial purpose is
90 days.
c) The warranty period for routine maintenance parts, such as, but not limited
to, blades, trimmer heads, chain bars, saw chains, belts, scraper bars, blower
nozzles, and all other EGO accessories is 90 days for residential purpose, 30 days
for industrial, professional or commercial purpose. These parts are covered for
90/30 days from manufacture defects in normal working conditions.
d) This warranty is void if the product has been used for rental purpose.
e) This warranty does not cover the damage resulting from modication, alteration