EGO HT2410 Operator's Manual
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
OPERATOR'S MANUAL
56-VOLT
LITHIUM-ION
CORDLESS
HEDGE TRIMMER
MODEL NUMBER HT2410
Español p. 57
Français p. 27
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT24102
TABLE OF CONTENTS
Safety Symbols ..........................................4
Safety Instructions .....................................5-11
Introduction ............................................12
Specifications ..........................................12
Assembly ..............................................13
Packing List ............................................13
Description .........................................14-15
Operation ...........................................16-20
Maintenance ........................................21-22
Troubleshooting .........................................23
Warranty ...........................................24-25
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 3
READ ALL INSTRUCTIONS!
READ & UNDERSTAND
OPERATOR’S MANUAL
WARNING:
Some dust created by power cutting contains chemicals known to
the state of California to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemical: work in a well-ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT24104
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger. The
instructions and warnings they give are no substitutes for proper accident prevention
measures.
WARNING:
Be sure to read and understand all safety instructions in this
Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to following all instructions listed below
may result in electric shock, fire, and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
Indicates DANGER, WARNING, OR CAUTION.
May be used in conjunction with other symbols or pictographs.
WARNING!
The operation of any power tools can result in foreign
objects being thrown into your eyes, which can result in severe eye
damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shield and a full-face shield when
needed. We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use eye protection
which is marked to comply with ANSI Z87.1.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 5
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may appear on this product. Read,
understand, and follow all instructions on the machine before attempting to assemble
and operate.
Safety Alert Indicates a potential personal injury hazard.
Read &
Understand
Operator’s
Manual
To reduce the risk of injury, user must read
and understand the operator’s manual before
using this product.
Eye Protection
Always wear safety goggles or safety glasses
with side shields and a full face shield when
operating this product.
Danger- Keep
Hands Away
from Blades
Contact with blade will result in serious
personal injury.
Recycle Symbols
This product uses lithium-ion (Li-ion)
batteries. Local, state, or federal laws may
prohibit disposal of batteries in ordinary
trash. Consult your local waste authority for
information regarding available recycling and/
or disposal options.
IPX4
Ingress
Protection
Degree
Protection from splashing water
V
Volt Voltage
mm Millimeter Length or size
in. Inch Length or size
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT24106
Direct Current Type or a characteristic of current
n
0
No-Load Speed Rotational speed, at no load
SPM
Strokes Per
Minute
Stroke speed, at no load
kg Kilogram Weight
lb Pound Weight
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 7
GENERAL POWER TOOL SAFETY WARNINGS
WARNING:
Read all safety warnings and instructions. Fail to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warning refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
If operating a power tool in a damp location is unavoidable, use a GFCI protected
supply. Use of a GFCI reduces the risk of electric shock.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT24108
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust devices
can reduce dust-related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and more safely at the rate for which it
was designed.
Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 9
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories, tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contact eyes,
additionally seek medical help. Liquid ejected from the battery may cause irritation
or burns.
SERVICE
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool is
maintained.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT241010
HEDGE TRIMMER SAFETY WARNINGS
DANGER
– Keep hands away from blade. Contact with blade will result in serious
personal injury.
Keep all parts of the body away from the cutter blade. Do not remove cut
material or hold material to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. Blades coast after turn off.
A moment of inattention while operating the hedge trimmer may result in serious
personal injury.
Carry the hedge trimmer by the handle with the cutter blade stopped. Proper
handling of the hedge trimmer will reduce possible personal injury from the cutter
blades.
Hold the power tool by insulated gripping surfaces only, because the cutter
blade may contact hidden wiring. Cutter blades contacting a “live” wire may
make exposed metal parts of the power tool “live” and could give the operator an
electric shock.
Keep cable away from cutting area. During operating the cable may be hidden in
shrubs and can be accidentally cut by the blade.
Use both hands when operating the hedge trimmer. Using one hand could
cause loss of control and result in serious personal injury.
IMPORTANT SAFETY INSTRUCTIONS
Do not charge the battery pack in rain, or in wet locations.
Use only with the battery packs and chargers listed below:
BATTERY CHARGER
BA1120, BA1400, BA2240
BA2800, BA4200
CH2100
CH5500
Do not grasp the exposed cutting blades or cutting edges when picking up or holding
the hedge trimmer.
Do not use on a ladder, rooftop, tree, or other unstable support. Stable footing on a
solid surface enables better control of the hedge trimmer in unexpected situations.
Never allow children to operate the hedge trimmer.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 11
Never remove or tamper with safety devices. Check their proper operation regularly.
Never do anything to interfere with the intended function of a safety device or to
reduce the protection provided by a safety device.
Never operate the hedge trimmer without proper guards, plates, or other safety
protective devices in place.
Check damaged parts before further use of the hedge trimmer. Any part that is
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any other condition that may affect
its operation. Any part that is damaged should be properly repaired or replaced by an
authorized service center unless indicated elsewhere in this manual.
Check the blade and motor mounting bolts at frequent intervals for proper tightness.
Also, visually inspect blade for damage (e.g., bent, cracked, and worn). Replace the
blade only with a blade from the original equipment manufacturer (OEM).
Replace the blade if it is bent or cracked. An unbalanced blade causes vibration that
could damage the motor drive unit or cause personal injury.
If the equipment should start to vibrate abnormally, stop the motor and check
immediately for the cause. Vibration is generally a warning of trouble.
The trimmer shall be used to cut stems less than 1 in. (26mm) thick.
Trim only in daylight or in good artificial light.
Remove or disconnect battery before servicing, cleaning, or removing material from
the hedge trimmer.
Do not wash with a hose; avoid getting water in motor and electrical connections.
When servicing use only identical replacement parts listed in this manual. Use of
parts which do not meet the original equipment specifications may lead to improper
performance and compromised safety.
Follow instructions for lubricating and changing accessories.
Keep handles dry, clean and free from oil and grease.
Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. If you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product and possible injury.
SAVE THESE INSTRUCTIONS!
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT241012
INTRODUCTION
Congratulations on your selection of the new 56V Lithium-ion powered hedge trimmer.
It has been designed, engineered and manufactured to give you the best possible
dependability and performance.
Should you experience any problem you cannot easily remedy, please contact EGO
customer service center 1-855-EGO-5656.
This manual contains important information on to the safe assembly, operation and
maintainance of your product. Read it carefully before using the product. Keep this
manual handy so you can refer to it at any time.
SERIAL NUMBER _____________________ DATE OF PURCHASE _________________
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP THEM IN A
SAFE PLACE FOR FUTURE REFERENCE
SPECIFICATIONS
Voltage 56V
No Load Speed (n0) 3000 SPM
Cutting Length 24 in. (610 mm)
Weight (Without battery pack, blade guard) 6.16 lb. (2.80kg)
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 13
ASSEMBLY
WARNING:
If any parts are damaged or missing, do not operate this product
until the parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product or create accessories not
recommended for use with this product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to possibly serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assembling parts, making
adjustments, cleaning, or when not in use.
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from the box. Make sure that
all items listed in the packing list are included.
Inspect the tool carefully to make sure that no breakage or damage occurred
during shipping.
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
If any parts are damaged or missing, please return the product to the place of
purchase.
PACKING LIST
PART NAME QUANTITY
Hedge Trimmer 1
Blade Guard 1
Operator's Manual 1
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT241014
DESCRIPTION
KNOW YOUR HEDGE TRIMMER (Fig.1)
The safe use of this product requires an understanding of the information on the tool
and in this operator’s manual, as well as knowledge of the project you are attempting.
Before using this product, familiarize yourself with all operating features and safety
rules.
Blade
Hanging hole Blade guard
Hanging hole
Hand guard
Tip protector
Front handle
Lock-off button
Rear handle
Battery-release button
Electric contacts
Latch
Front switch lever
Rear switch lever
Battery-mounting slot
Batter-ejection
1
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 15
Hand Guard
Helps to protect the operator’s hands; deflects chips or other debris away from the
operator.
Front Handle
For easy control of the tool.
Rear Handle
Ergonomic handle with overmold improves comfort and grip.
Lock-off Button
Helps to prevent accidental or unauthorized activation of the switch lever. It must be
depressed before the trigger switch can be activated.
Front Switch Lever/Rear Switch Lever
The hedge trimmer can be started only if both switch levers (in rear and front of the
handle) are depressed simultaneously.
Blades
Hardened steel blades for cutting hedges and shrubs.
Blade Guard
The blade guard keeps the operator from coming in contact with the sharp blades
when the tool is not in use. It also helps keep the blades from being nicked or damaged
when the tool is in transportation and storage.
Tip Protector
Protects the outer end of the blade.
Battery-Release Button
Press to release the battery pack from the tool.
Latch
Locks the battery pack in place when installed on the tool.
Battery-ejection
Aids in removing the battery.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT241016
OPERATION
WARNING:
Do not allow familiarity with this product to make you careless.
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
Always wear eye protection that complies with ANSI Z87.1. Failure
to do so could result in objects being thrown into your eyes and other possible serious
injuries.
WARNING:
Do not use any attachments or accessories not recommended by the
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
WARNING:
To prevent serious personal injury, remove the battery pack from the
tool before servicing, cleaning, changing attachments or removing material from the
unit.
Before each use, inspect the entire product for damaged, missing, or loose parts such
as screws, nuts, bolts, caps, etc. Securely tighten all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced.
APPLICATIONS
You may use this product for the purposes listed below.
Trimming hedges, shrubs, and bushes with branch diameters less than 1 in.
(26 mm).
TO INSTALL/REMOVE BATTERY PACK (Fig. 2 & 3)
NOTE:
Fully charge the battery pack
before first use.
To Install Battery Pack (Fig. 2)
Align the ribs of the battery pack
with the battery-mounting slots on
the hedge trimmer.
Slide the battery pack in until it
snaps into position.
2
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 17
NOTE: Make sure that the latch on the
hedge trimmer snaps into place and the
battery pack is secured to the tool before
beginning operation.
To Remove Battery Pack (Fig. 3)
WARNING:
Always be aware for
the location of your feet, children, or pets
when pressing the battery-release button.
Serious injury could result if the battery
pack falls. NEVER remove the battery
pack at a high location.
Press the battery-release button; the
battery pack will disengage from the
latch.
Grasp the battery pack and remove
it from the hedge trimmer.
HOLDING THE HEDGE TRIMMER
(Fig. 4, 5 & 6)
The unit has both a front and rear handle.
With the blade directed away from you,
hold the unit by both handles.
The switch lever in the front handle
can be activated on any of the three
sides, giving you many choices for a
comfortable grip when performing cutting
operations.
WARNING:
Always keep both
hands on the hedge trimmer handles.
Never hold shrubs with one hand while
operating the hedge trimmer with the
other hand. Failure to heed this warning
may result in serious injury.
Press to Release
3
4
5
6
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT241018
STARTING/STOPPING THE HEDGE TRIMMER
Before starting the hedge trimmer:
Make sure that you have a secure and balance footing.
Stand upright and hold the hedge trimmer in a relaxed position.
Remove the blade guard.
Make sure the cutting blade is not touching the ground or any other objects.
Hold the unit with both hands: one hand on the rear handle and one hand on the
front handle.
TO START THE HEDGE TRIMMER
1. Install the battery pack.
2. Depress and hold the switch lever in the front handle with one hand.
3. Press and hold the lock-off button with the thumb of your other hand, then squeeze
the rear switch lever with your fingers to start the hedge trimmer. Release the lockoff button and continue to squeeze the trigger for continued operation.
TO STOP THE HEDGE TRIMMER
Move the hedge trimmer away from the cutting area and release the rear switch lever
to stop the hedge trimmer.
WARNING:
Always remove the battery pack from the hedge trimmer during
work breaks and after finishing work.
USING THE HEDGE TRIMMER
WARNING:
If the blade jams on any electrical cord or line, DO NOT TOUCH THE
BLADE! IT CAN BECOME ELECTRICALLY LIVE AND VERY DANGEROUS. Continue to hold
the hedge trimmer by the insulated rear handle or lay it down and away from you in
a safe manner. Disconnect the electrical service to the damaged line or cord before
attempting to free the blade from the line or cord. Failure to heed this warning will
result in serious personal injury or possible death.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 19
WARNING:
If any parts are missing, damaged or broken, do not operate your
trimmer until they have been replaced. Failure to do so could result in possibly serious
personal injury.
WARNING:
To prevent serious personal injury, always use both the front handle
and the rear handle to hold the hedge trimmer during operation.
WARNING:
To prevent serious personal injury, keep hands away from blades.
Do not attempt to remove cut material or hold material to be cut when the blades
are moving. Make sure that the blades have totally stopped and the battery pack is
removed before clearing jammed material from blades. Do not grasp the exposed
cutting blades or cutting edges when picking up or holding the unit.
WARNING:
Clear the area to be cut before each use. Remove all objects, such
as cords, lights, wire, or string that could become entangled in the cutting blade and
create a risk of serious personal injury.
Before starting the hedge trimmer, maintain proper footing and balance and do
not overreach. Wear safety goggles, non-skid footwear and rubber gloves. Hold
the unit with both hands with the cutting blades directed away from you. Always
use the hedge trimmer properly.
Do not trim too much at one time. This can cause the blades to bind and slow,
reducing the cutting efficiency.
Do not force the hedge trimmer through heavy shrubbery. This can cause the
blades to bind and slow down. If the blades slow down, reduce the pace of
your work.
When trimming new growth, use a wide sweeping action, so that the stems are
fed directly into the cutting blade. Older growth will have thicker stems and will
be trimmed most easily by using a sawing movement.
Always cut stems or twigs that are less than 1 in. thick. Use a non-powered hand
saw or pruning saw to trim large stems.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT241020
TOP CUTTING (Fig. 7)
Use a wide sweeping motion. A slight
downward tilt of the cutting blades in
the direction of motion gives the best
cutting results. If desired, you can use a
string to help guide you as you cut your
hedge level. Decide how high you want
the hedge. Then, stretch a piece of string
along the hedge at this height. Trim the
hedge just above this guide line.
SIDE CUTTING (Fig. 8)
When trimming the sides of the hedge, begin at the bottom and cut upwards. Trim the
side of a hedge so that it will be slight narrower at the top.This shape will expose more
of the hedge to sunlight, resulting in a more uniform growth.
8
7
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 21
MAINTENANCE
WARNING:
When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
WARNING:
To avoid serious personal injury, always remove the battery pack
from the product when cleaning or performing any maintenance.
CLEANING
Use a soft brush to remove debris from all air intakes and cutting blade.
To remove pitch and other sticky residue, spray the blades with resin solvent.
Run the motor briefly so that the solvent is evenly distributed.
Wipe the surface with a dry cloth.
WARNING:
Never use water to clean your trimmer. Avoid using solvents when
cleaning plastic parts. Most plastics are susceptible to damage from various types of
commercial solvents. Use a clean cloth to remove dirt, dust, oil, grease, etc.
SHARPENING THE CUTTING
BLADE
1. Start and stop your hedge trimmer
until the cutter blade and the guard are
slightly offset, as shown in Fig. 9. This
will allow clearance for the file between
cutter teeth and guard teeth.
2. Remove the battery pack from your
hedge trimmer.
3. Clamp the blade assembly in a vise
and file the exposed cutting surface of each blade tooth. Remove as little material as
possible. Be sure to retain the original angle of each tooth when filing.
4. Remove the hedge trimmer from the vise; restart it and stop it to expose the
unsharpened edges of the blade teeth.
5. Remove the battery pack and repeat the sharpening procedure above.
9
Guard Tooth
Cutter Tooth
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT241022
NOTE: Do not operate your hedge trimmer with dull or damaged cutting blades.
This may cause overload and will give unsatisfactory cutting results.
LUBRICATING THE BLADE
(Fig. 10)
For best operation and longer blade life,
lubricate the hedge trimmer blade with
light weight machine oil before and after
each use.
1. Remove the battery pack from the
hedge trimmer.
2. Lay the hedge trimmer on a flat
surface. Apply some light weight
machine oil along the edge of the top blade. If you will be using the hedge trimmer
for an extended period, it is advisable to stop, remove the battery, and oil the blade
during use.
NOTE: Do not oil the blade while the hedge trimmer is running.
TRANSPORTING AND STORING
Always place the blade guard on the blade before storing or transporting the
hedge trimmer. Use caution to avoid the sharp teeth of the blade.
Clean the hedge trimmer thoroughly before storing.
Store the hedge trimmer indoors, in a dry place that is inaccessible to children.
Keep away from corrosive agents such as garden chemicals and deicing salts.
WARNING:
Blades are sharp. When handling the blade assembly, wear
non-slip, heavy-duty, protective gloves. Do not place your hand or fingers
between blades or in any position where they could get pinched or cut. NEVER
touch blades or service the unit with battery pack installed.
10
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 23
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Hedge trimmer
dose not work.
◾
The battery pack is not
attached to the hedge trimmer.
◾
Attach the battery pack to the hedge
trimmer.
◾
No electrical contact between
the hedge trimmer and
battery.
◾
Remove the battery, check contacts
and reinstall the battery pack.
◾
The battery pack is depleted.
◾
Charge the battery pack.
◾
The battery pack or the hedge
trimmer is too hot.
◾
Remove the battery pack from the
hedge trimmer and allow the battery or
the hedge trimmer to cool until the tool
and battery pack's temperature drops
below 152°F (67°C).
◾
The front and rear switch
levers are not depressed
simultaneously.
◾
Press the lock-off button first and then
press the switch levers in the front and
rear handle simultaneously.
◾
The blade is jammed.
◾
Remove the battery pack from the tool,
remove the obstruction carefully, then
reinsert the battery and restart the tool.
Excessive
vibration or
noise.
◾
Dry or corroded blades.
◾
Lubricate the blades, following the
instructions in the “LUBRICATING THE
BLADE” section in this manual.
◾
Blades or blade support is bent.
◾
Replace with a new blade or support.
Contact EGO service center for blade
replacement service.
◾
Bent or damaged teeth.
◾
Replace with a new blade. Contact EGO
service center for blade replacement
service.
◾
Loose blade bolts.
◾
Tighten the blade bolts. Use a 1/8" (3mm)
hex wrench and turn the bolt clockwise
to tighten.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT241024
WARRANTY
EGO WARRANTY POLICY
5 year limited warranty on EGO outdoor power equipment and 3 year limited warranty
on EGO Power+ System battery packs and chargers.
Please contact EGO Customer Service Toll-Free at 1-855-EGO-5656 any time you
have questions or warranty claims.
LIMITED SERVICE WARRANTY
FOR FIVE YEARS from the date of original retail purchase, this EGO product is warranted
against defects in material or workmanship. Defective product will receive free repair.
FOR THREE YEARS from the date of original retail purchase, the EGO Power+ System
battery pack and charger are warranted against defects in material or workmanship.
Defective product will receive free repair.
This warranty does not cover routine maintenance parts and consumables that can
wear out from normal use within the warranty period.
a) This warranty applies only to the original purchaser from an authorized EGO retailer
and may not be transferred. Authorized EGO retailers are identified online at http://
egopowerplus.com/pages/warranty-policy.
b) The warranty period for any EGO product or part used for industrial, professional or
commercial purpose is one year.
c) This warranty is void if the product has been used for rental purpose.
d) This warranty does not cover the damage resulting from modification, alteration or
unauthorized repair.
e) This warranty only covers defects arising under normal usage and does not cover
any malfunction, failure or defect resulting from misuse, abuse (including overloading
of the product beyond capacity and immersion in water or other liquid), accidents,
neglect or lack of proper installation, and improper maintenance or storage.
f) This warranty does not cover normal deterioration of the exterior finish, including but
not limited to scratches, dents, paint chips, or to any corrosion or discoloring by heat,
abrasive and chemical cleaners.
56V LITHIUM-ION CORDLESS HEDGE TRIMMER—HT2410 25
HOW TO OBTAIN SERVICE
For warranty service, please contact EGO customer service toll-free at
1-855-EGO-5656. When requesting warranty service, you must present
the original dated sales receipt. An authorized service center will be selected
to repair the product according to the stated warranty terms.
ADDITIONAL LIMITATIONS
To the extent permitted by applicable law, all implied warranties, including warranties
of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, are disclaimed. Any
implied warranties, including warranties of merchantability or fitness for a particular
purpose, that cannot be disclaimed under state law are limited to five years from the
date of purchase for outdoor power equipment and three years from date of purchase
for battery pack and charger.
Chervon North America is not responsible for direct, indirect, incidental or consequential
damages.
Some states do not allow limitations on how long an implied warranty lasts and/or do
not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
For customer service contact us toll-free at:
1-855-EGO-5656 or EGOPOWERPLUS.COM
EGO Customer Service, 120 Ionia Street SW / Suite 102 Grand Rapids, MI 49503
GUIDE D’UTILISATION
TAILLE-HAIE SANS FIL À
BLOC-PILE AU LITHIUM-ION
DE 56 V
NUMÉRO DE MODÈLE HT2410
AVERTISSEMENT: TAfin de réduire les risques de blessure, l’utilisateur doit lire et
comprendre le guide d’utilisation avant d’utiliser ce produit. Conservez le présent guide
afin de pouvoir le consulter ultérieurement.
Loading...