EGO CH2100, CH5500 Operating Manual
• WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
Operating manual
56-VOLT
STANDARD
CHARGER
MODEL NUMBER CH2100
Español p. 21
56V STANDARD CHARGER — CH21002
table of contents
FCC Statement .......................................... 4
Safety Symbols ......................................... 5
Safety Instructions .....................................6-11
Specications ......................................... 11
Description ........................................... 12
Operation ...........................................14-16
Maintenance .......................................... 17
Troubleshooting ........................................ 18
Warranty ...........................................19-20
56V STANDARD CHARGER — CH2100 3
read all instructions!
This battery charger has many features for making its use more pleasant and
enjoyable. Safety, performance, and dependability have been given top priority in the
design of this product making it easy to maintain and operate.
WARNING:
Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contains chemicals known to the state of California
to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
Lead from lead-based paints,
Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemical: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to lter out microscopic particles.
56V STANDARD CHARGER — CH21004
fcc statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTICE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures: Reorient or relocate the receiving antenna. Increase
the separation between the equipment and receiver. Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected. Consult the
dealer or an experienced radio/TV technician for help.
56V STANDARD CHARGER — CH2100 5
safety symbols
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger. The
instructions and warnings they give are no substitutes for proper accident prevention
measures.
WARNING:
Be sure to read and understand all safety instructions in this
Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to following all instructions listed below
may result in electric shock, re, and/or serious personal injury.
WARNING:
To ensure safety and reliability, all repairs should be performed by a
qualied service technician.
WARNING:
The operation of any power tools can result in foreign objects being
thrown into your eyes, which can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses with
side shields and a full face shield when needed. We recommend a
Wide Vision Safety Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection which is marked
to comply with ANSI Z87.1.
56V STANDARD CHARGER — CH21006
safety instructions
This page depicts and describes safety symbols that may appear on this product.
Read, understand, and follow all instructions on the machine before attempting to
assemble and operate.
V Volt Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating
Current
Type of current
Direct Current Type or a characteristic of current
n
0
No Load Speed Rotational speed, at no load
56V STANDARD CHARGER — CH2100 7
... /min Per Minute Revolutions per minute
Class II
Construction
Double-insulated construction
Wet Conditions
Alert
Do not expose to rain or use in damp
locations.
Read Operator’s
Manual
To reduce the risk of injury, user must read
and understand operator’s manual before
using this product
Eye Protection
Always wear safety goggles or safety
glasses with side shields and a full face
shield when operating this product.
Safety Alert Precautions that involve your safety.
DANGER:
People with electronic devices, such as pacemakers, should consult
their physician(s) before using this product. Operation of electrical equipment in close
proximity to a heart pacemaker could cause interference or failure of the pacemaker.
WARNING:
Read and understand all instructions. Failure to follow all instructions
listed below may result in electric shock, re and/or serious personal injury. The term
“power tool” in all of warnings listed below refers to corded power tools or battery
operated (cordless) power tools.
WARNING:
To ensure safety and reliability, all repairs should be performed by a
qualied service technician.
56V STANDARD CHARGER — CH21008
WORK AREA SAFETY
Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive environments, such as in the
presence of ammable liquids, gases, or dust. Power tools create sparks,
which may ignite the dust or fumes.
ELECTRICAL SAFETY
Avoid body contact with grounded surfaces, such as pipes, radiators, ranges,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with grounded power tools. Unmodied plugs and
matching outlets will reduce the risk of electric shock.
Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging
the power tool. Keep the cord away from heat, oil, sharp edges, or moving parts.
Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
Use charge the EGO lithium-ion battery packs list below:
CHARGER BATTERY PACKS
CH2100 BA2240 56V Battery 4.0Ah
BA1120 56V Battery 2.0Ah
56V STANDARD CHARGER — CH2100 9
SERVICE
Have your charger serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the charger is maintained.
When servicing a charger, use only identical replacement parts. Follow
instructions in the Maintenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance instructions may create a risk of shock or
injury.
SAFETY RULES FOR CHARGER
CAuTION:
To reduce the risk of electric shock or damage to the charger and
battery, charge only those lithium-ion rechargeable batteries specically designated
on your charger’s label. Other types of batteries may burst, causing personal injury or
damage.
Before using the battery charger, read all instructions and cautionary markings
in this manual and on the battery charger, the battery and the product using the
battery to prevent misuse of the products and possible injury or damage.
Do not use the charger outdoors or expose it to wet or damp conditions.
Water entering the charger will increase the risk of electric shock.
Do not handle charger, including the charger plug and charger terminals
with wet hands.
Use of an attachment not recommended or sold by the battery-charger
manufacturer may result in a risk of re, electric shock, or injury to persons.
Recharge only with the charger specied by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of re when used with
another battery pack.
Do not abuse the cord or charger. Never use the cord to carry the charger. Do
not pull the charger cord to disconnect the plug from a receptacle. Damage to
the cord or charger could occur and create an electric shock hazard. Replace
damaged cords immediately.
56V STANDARD CHARGER — CH210010
Make sure that the cord is located so that it will not be stepped on, tripped
over, come in contact with sharp edges or moving parts, or otherwise be
subjected to damage or stress. This will reduce the risk of accidental falls,
which could cause injury and damage to the cord, which could then result in
electric shock.
Keep the cord and charger from heat to prevent damage to housing or
internal parts.
Do not allow gasoline, oils, petroleum-based products, etc. to come in
contact with plastic parts. These materials contain chemicals that can damage,
weaken, or destroy plastic.
Do not operate the charger with a damaged cord or plug, which could cause
shorting and electric shock. If damaged, have the charger repaired or replaced
by an authorized service technician at an EGO Service Center.
Do not operate the charger if it has received a sharp blow, been dropped,
or has otherwise been damaged in any way. Take it to an authorized service
technician for an electrical check to determine if the charger is in good working
order.
Do not disassemble the charger. Take it to an authorized service technician
when service or repair is required. Incorrect reassembly may result in a risk of
electric shock or re.
Unplug the charger from the electrical outlet before attempting any
maintenance or cleaning to reduce the risk of electric shock.
Disconnect charger from the power supply when not in use. This will reduce
the risk of electric shock or damage to the charger if metal items should fall into
the opening. It will also help prevent damage to the charger during a power surge.
Risk of electric shock. Do not touch the uninsulated portion of output connector
or uninsulated battery terminal.
Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. If you lend this tool to someone else, also lend these
instructions to them to prevent misuse of the product and possible injury.
56V STANDARD CHARGER — CH2100 11
IMPORTANT SAFETY INSTRUCTIONS
Save these instructions. This manual contains important safety and operating
instructions for 56V Standard Charger CH2100.
Before using the battery charger, read all instructions and cautionary
markings on the battery charger, the battery and the product using battery.
WARNING:
When using electric appliances, basic precautions should always be
followed, including the following.
To reduce the risk of injury, close supervision is necessary when an appliance is
used near children.
Only use attachments recommended or sold by manufacturer.
Do not use outdoors.
For a portable appliance – To reduce the risk of electrical shock, do not put
charger in water or other liquid. Do not place or store appliance where or can fall
or be pulled into a tub or sink.
CAuTION:
To reduce the risk of injury, charge only lithium-ion rechargeable
batteries. Other types of batteries may burst, causing personal injury or damage.
56V STANDARD CHARGER — CH210012
introduction
Congratulations on your selection of a new generation of 56V charger. It has been
designed, engineered and manufactured to give you the best possible dependability
and performance.
Should you experience any problem you cannot easily remedy, please contact EGO
customer service center 1-855-EGO-5656.
This manual contains important information on to the safe assembly, operation and
maintenance of your 56V standard charger. Read it carefully before using the charger.
Keep this manual handy so you can refer to it at any time.
SERIAL NUMBER _____________________ DATE OF PURCHASE _________________
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE
PLACE FOR FUTURE REFERENCE
sPecifications
Charger Input 120V~60Hz, 210W
Charger Output 56V, max. 4200mAh, Li-ion type
rechargeable battery pack
Quick-Charge Time Approximately 80 minutes for BA2240
battery pack, 40 minutes for BA1120
battery pack
Optimum Charging Temperature 32°F-104°F (0°C-40°C)
Charger Weight 2.36 lb. (1.07 kg)
Loading...