E-GLIDE ELECTRIC BIKE OPERATING INSTRUCTIONS
www.e-glidebike.com
TABLE OF CONTENTS
General Warning
Note to Parents and Guardians
..........................................................................1
BATTERY MANAGMENT
About the Battery
Charging the Battery
Installing the Battery
Removing the Battery
Storing the Battery
LED Indicator
........................................................................2
....................................................................2
...................................................................3
..................................................................5
......................................................................6
..............................................................................6
BASIC INSTRUCTIONS
Seat Adjustment
.........................................................................7
......................................................1
Suspension Seatpost Adjustment
Safety First
Mechanical Safety
Before Your First Motorized Ride
Riding an Electric Bike
Using the Throttle
Watching for Objects Around You
Best Practices for Extending Range and Battery Life
.................................................................................8
........................................................................8
................................................................10
......................................................................10
...................................................8
....................................................9
.................................................10
.......................11
SAFETY
Basics
Safety Guidelines
Wet Weather Riding
Night Riding
Parking, Storage, and Transport
Maintenance and Bicycle Care
......................................................................................11
......................................................................12
...................................................................15
..............................................................................15
...................................................20
.....................................................21
TECHNICAL
Tire Pressure
Tire, Tube, Wheel, and Axel Repair
Removing the Rear Motor Wheel
Installing the Rear Motor Wheel
Removing and Installing the Front Wheel
............................................................................22
...............................................23
..................................................23
...................................................26
......................................28
Motor Controller Replacement
Maintenance Schedule
Torque Settings
Link to Assembly Instructions & Online Resources
Warranty
..................................................................................33
.........................................................................31
...............................................................30
.....................................................29
..........................32
General Warning
Like any sport, bicycling involves the risk of injury and damage. By choosing to ride
a bicycle, you assume the responsibility for that risk, so you need to know, and
practice, the rules of safe and responsible riding and of proper use and maintenance. Proper use and maintenance of your ebike reduces risk of injury.
Become accustomed to the bikes power control system before operating. The throttle allows the bike to attain full power immediately. Inexperience riders should take
extra care when first applying the throttle. The pedal assist feature is also a powerful option and riders need to understand power settings and its operation before
first use.
A Note for Parents and Guardians
The E-Glide S/T is not designed for use by children. As a parent or guardian, you
are responsible for the activities and safety of your child. It is your responsibility to
BE SURE your child wears a helmet if you choose to let him ride the S/T, and that
he be familiar with its operation.
Always TURN OFF THE POWER before mounting or dismounting the bike.
Read the battery pack and detailed charging instructions in “Battery Management”.
You should fully charge the lithium battery according to the charging instructions
before your first ride.
Keep your bike indoors when not in use.
1
BATTERY MANAGMENT
About the Battery
Your S/T lithium battery is made from Panasonic 18650 lithium cells, the same type
of cells found in Tesla EV’s. The battery is removable and can be charged on or
off the bicycle. The battery is sealed and maintenance free, you must never open
the battery as this will void the warranty. Each battery has a specific serial number
and barcode which can be found on the underside of the battery.
Charging the Battery
You will need to charge your battery prior to powering the bike for the first time.
The battery may be in hibernate state which could take over 8 hours for the initial
charge. Charge your battery as follows:
1. Lift the charging port rubber cover open at the bottom of the battery, exposing
the DC 2.5mm Power Jack (charging port). There is also a 5v USB power
source/communication port. Do not use the USB port other than to power a light or
charge a cell phone.
2. Plug the charger into a wall outlet. When ON the light will display green and
when charging, it will display red.
2
3. Plug the DC 2.5mm Jack into the battery charging port, confirming a tight con-
nection. The charger light will display red as it starts charging. Upon being fully
charged (up to 8 hours initially), the charger will light green. Disconnect the charger from the battery.
4. NEVER leave the charger connected to the battery after the battery is fully
charged. As the battery drains via the BMS (Battery Management System), the
charger will continuously charge the battery. This is not good for lithium batteries
and will decrease the life of the battery.
Installing the Battery
The S/T’s battery mounts on the downtube of the bicycle from the left side.
3
1.To mount the battery, you would first slide the base of the battery into the
frame’s lower docking mount (closest to the crankset)
2. Then move the battery sideways into the lock position.
The S/T’s battery mounts on the downtube of the bicycle from the left side.
4
3.The battery will be a tight fit. ALWAYS confirm the battery is locked in place by
pulling the top of the battery sideways. By pulling on the battery, this will assure
the battery has locked into position.
Removing the Battery
Insert key into battery lock, turn key and pull lever at same time, and pull battery
off of bike.
5
Storing the Battery
The Li-ion battery the S/T utilizes is the latest technology in Li-ion battery cells. It
is recommended that you do not store the battery in hot conditions. If the bicycle is
being stored indoors in a cool environment, the battery should be stored on the
bicycle in the “OFF” position. The battery should be kept away from fires or sparks
and also away from possible water damage. The battery is water resistant and not
water proof. Avoid wet conditions such as rain or cover your battery in the rain.
Store the battery in a cool dry place and charge to a maximum 80% every 90
Days.
LED Battery Indicator
There is an LED indicator on the battery itself. The indicator has 4 LEDs lights
displaying 4 levels of remaining voltage. When pressing the Battery ON / OFF
rubber panel switch at the top of the battery to the ON position, the indicator will
light 1, 2, 3 or 4 LED lights according to the remaining voltage in the battery. 4 LED
lights if 75% to full charge. The voltage needed to power the motor is a minimum
of 30V. If only 2 LED lights remain, the battery is now at > 50% depletion and must
be recharged. The battery also has a USB port for phone charging.
6
BASIC INSTRUCTIONS
Bicycle fit It is very important your S/T is properly adjusted for comfort and to
avoid the possibility of losing control while riding. The saddle and handlebar can be
adjusted to allow for a safe and comfortable riding position.
Seat Adjustment
The ball of your foot, when resting on the pedal, should only allow for a slight bend
at the knee when seated. Raise or lower the seat tube for proper adjustment.
WARNING: The seat post includes a minimum insertion mark. It is important you
do not allow the seat post to be clamped below this mark. This mark must be
inserted into the frame pass the top of quick release clamp. If clamping below this
mark, it can cause the seat post to break, failure to follow this warning could result
in serious injury or death.
CAUTION: The seat tube quick release clamp must be checked for tightness to
ensure the saddle will not accidentally slide into the seat tube when riding. This can
cause a rider to lose balance and may result in a fall.
7
Suspension Seatpost Adjustment
Your S/T had an adjustable suspension seatpost. Remove the seatpost. There is a
knob on the bottom of the seat post. Turn as marked for softer or firmer ride.
Safety First
It is important you follow your local bicycle laws but also it is important you ride
safely. Below are examples of understanding how to ride your new S/T safely.
Always wear an approved helmet when riding your bike, and follow the helmet
manufacturer’s instructions for fit, use and care of your helmet.
Mechanical Safety Check
Check the condition of your bicycle before every ride:
• Nuts, bolts and straps: Make sure nothing is loose. Lift the front wheel off the
ground by two or three inches then let it bounce on the ground. Anything sound,
feel or look loose? Do a quick visual and tactile inspection of the whole bike. Are
there any loose parts or accessories? If so, secure them. If you’re not sure, ask
someone with bike experience to check.
8
• Tires and Wheels: Make sure tires are correctly inflated
• Brakes: Check the brakes for proper operation. Squeeze the brake levers. Are
the brakes properly releasing? All control cables seated and securely engaged? Do
the disc brake pads grasp the rotors within an inch of brake lever movement? Can
you apply full braking force at the levers without having them touch the handlebar?
If not, your brakes need adjustment. Do not ride the bike until the brakes are
properly adjusted.
• Quick Releases: Make sure seat post and front wheel quick release levers are
properly adjusted and all are in the locked position.
• Handlebar and saddle alignment: Make sure the saddle and handlebar stem
are parallel to the bike’s center line, clamped and bolts tightened enough so that
you can’t twist them out of alignment. If not, align and tighten them.
• Handlebar ends: Make sure the left handlebar grip and right throttle grip are
secure and in good condition. If not, replace them.
WARNING: All Quick release levers must be closed and the clamps or axles tight.
One loose quick release lever can cause the rider to lose control and cause serious
injury or death.
Before Your First Motorized Ride
Before your first ride study this manual in its entirety. Make sure you are comfortable and confident when sitting on the bicycle. If an adjustment does not feel right
or something feels loose, check to ensure you are properly fitted to the bike and do
a mechanical safety check as explained in the previous section. Make sure you fully
charge your battery with the appropriate charger included.
9
Riding an Electric Bike
Riding an electric bike is like riding a non-electric bike but there are some differences to note. An electric bike is slightly heavier and requires more time to stop due to
higher traveling speeds. Your bike is also equipped with a powerful motor that
provides a boost noticeable when starting from a stop. The boost is exhilarating,
but you must be comfortable with the sensation before riding in crowded or congested areas. To maximize battery life, assist with pedaling, engage throttle to 90%
or less and add considerable coasting with no throttle to your riding. Your battery is
a finite resource and proper riding techniques will prolong its distance per charge.
Using the Throttle
the half throttle works just like a motorcycle throttle. Twist for more power. The
throttle overrides the Pedal Assist System, instant power can be had at anytime.
Watching for Obstacles Around You
Your new S/T travels at higher speeds than most riders are accustomed to, when
compared to pedaling a traditional bicycle. It is very important you are aware of
your surroundings and obstacles which may appear near you. You must watch the
road surface you are traveling on which could cause the tires to slip or cause a flat.
Examples are soft shoulders, rocks, pot holes, uneven paths, grates, construction
sites. Due to the higher rate of speed when riding under motor power versus pedaling, objects will advance into your path at a faster rate. Pay attention to other
riders in your area, automobiles, motorcycles, pedestrians, poles, intersections and
road signs to name a few. The S/T resembles a traditional bicycle and people walking, driving or standing may not realize you are on a motor powered vehicle and
misjudge your traveling speed.
WARNING: Hitting a pot hole, soft shoulder or other road deviation may cause you
to lose control, be thrown and cause serious injury or death.
10
Best Practices for Extending Range and Battery Life
• When riding under power, you can enhance distance by holding the throttle at
10% below full throttle.
• When riding under power, add as much non-powered coasting (similar to traditional pedaling) by releasing the throttle and allowing the bike to freely coast under
its own momentum. This will greatly increase the distance between charges.
• Familiarize yourself with throttling (10% below full), peddling and momentum
coasting to optimize the distance per charge.
• Pedal to assist the motor when climbing hills and accelerating from a stop.
Steep inclines will require pedaling by the rider to power over the hill as to not
OVERHEAT the motor.
• Avoid sudden starts and stops.
• Accelerate slowly.
SAFETY
Following are safety tips, it’s good to re- learn them, read them, BE SAFE!
The Basics
Below is a safety guideline according to the US Consumer Product Safety Commission in regards to riding a bike:
• Always wear a helmet to help prevent head injuries.
• Observe all traffic laws and signals, just as automobiles must do.
• Don’t ride double or attempt stunts.
• Ride near the curb in the same direction as traffic.
• Find alternate routes, rather than ride through busy intersections and heavy or
high-speed traffic.
• Walk -- don't ride -- your bicycle across busy intersections and left turn corners.
11
• Avoid riding in wet weather. When wet, handbrakes may require a long distance
to stop.
• Avoid riding in the dark. If you do, be sure the bike is equipped with a headlight,
a taillight and reflectors. Apply retro-reflective trim to clothing, or wear reflective
vests and jackets.
• Avoid loose clothing or long coats that can catch in pedals or wheels. Leg clips or
bands keep pants legs from tangling in the chain.
• Avoid crossing raised sewer grates.
• Regular maintenance is essential for safe riding. Refer to the maintenance recommendations. If you do not have basic mechanical skills, an authorized dealer should
perform repairs and maintenance.
• Align (or "true") wobbly wheels for better control. Spokes also may need adjustment.
• Replace all missing, damaged, or worn parts; for example, brake pads, chainguards, chain links, spokes, screws and bolts, handlebar grips.
• Tighten and/or adjust loose parts. 13
• Periodically inspect frame, fork, spindles and other components for cracking.
• Parts should be adjusted to manufacturer's torque specifications.
• Inflate tires to recommended pressure, and replace worn tires.
Safety Guidelines
Below are guidelines according to the NHSTA (National Highway and Traffic Safety
Administration) on bicycle safety.
• Protect Your Head: Wear a Helmet - Never ride a bicycle without wearing a
properly fitted helmet. Helmets are proven to be 85-88 percent effective in preventing traumatic brain injury, the primary cause of death and disabling injuries
resulting from cycling crashes. Wear a helmet that meets the U.S. Consumer Product Safety Commission (CPSC) standard (see inside of helmet for presence of a
label).
• Assure Bicycle Readiness: Ensure Proper Size and Function of Bicycle - Make
sure the bicycle fits you: Stand over the top of the bicycle – there should be minimum 3 inches of clearance from the frame bar. Seat height — as previously mentioned, with the ball of your foot on the pedal, the fully extended leg should have a
slight bend. Check all parts of the bicycle to make sure they are secure and working
well: The Handlebar should be firmly in place and turns easily. The wheels must be
straight and secure; the quick release rear axle must be secured.
12
• Stop It: Always Check Brakes Before Riding - Always control your speed by using
your brakes. Apply the rear brake slightly before the front brake. Always keep your
brakes adjusted. If you cannot stop quickly, adjust your brakes. When your hand
brake levers are fully applied, they should not touch the handlebars. Ride slowly in
wet weather and apply your brakes earlier, it takes more distance to stop.
• See and Be Seen: Wear clothes that make you more visible. Always wear neon,
florescent, or other bright colors when riding a bicycle.
• Avoid Biking at Night: It is far more dangerous to bicycle at night than during
the day. The ST requires LED lights for night time riding. If you must ride at night,
you should also do the following: wear retro-reflective clothing or material, not just
white or florescent, especially on your ankles, wrists, back, and helmet. Only ride in
areas familiar to you. Brightly lit streets are best. Always assume you are not seen
by a driver. Children should NOT ride at night.
• Go With the Flow: The Safe Way is the RIGHT Way - Ride on the right side in a
straight, predictable path. Always go single file in the same direction as other vehicles. Riding against traffic puts you where motorists don't expect you. They may
not see you, and may pull across your path, or turn into you.
• Check for Traffic: Always Be Aware of the Traffic Around You - Over 70 percent
of car-bicycle crashes occur at driveways or other intersections. Before you enter
any street or intersection, check for traffic. Always look left-right-left, and walk
your bicycle into the street to begin your ride. If you are already in the street,
always look behind you for a break-in traffic, then signal before going left or right.
Watch for left or right turning traffic.
• Learn Rules of The Road: Obey Traffic Laws - Bicycles are considered vehicles.
Bicyclists must obey the same rules as motorists. Read your State drivers handbook, and learn and follow all the traffic signs, laws, and rules for operating a vehicle on the road. Always signal your moves. Be courteous to pedestrians and other
vehicle operators. Never wear headphones while riding as they impair your ability
to hear traffic. Become familiar with the accommodations that are available for
bicyclists in your area. These include bicycle lanes and routes as well as offroad
paths. Take advantage of these whenever possible.
13
• “Drive” with Care: Share the Road - When you ride, consider yourself the driver
of a vehicle and always keep safety in mind. Choose to ride in the bike lane, if
available. If the roadway or bike lane is wide, ride to the right; if the lane is narrow,
you may choose to ride in the middle of the lane. Take extra precautions when
riding on a roadway. Bicycles are smaller than automobiles, and don’t protect the
operator like an automobile. You should: Make eye contact, smile, or wave to communicate with motorists. Courtesy and predictability are a key to safe cycling; be
considerate and aware of motorists and pedestrians. Learn to anticipate their
actions. Remember, pedestrians have the right of way; Ride far enough away from
the curb to avoid the unexpected from parked cars (i.e. opening doors or drivers
pulling out without checking); Keep control of your bicycle: look behind you while
maintaining your bicycle in a straight path; be able to ride with one hand on the
handlebars and signal a turn. (Practice these skills in a parking lot); Always look
over your shoulder, and if possible, signal before changing lanes; Make sure that
books, clothes, and other items are securely attached to the bicycle or carried in a
backpack; and Use bells, horns, or your voice to alert pedestrians and bicyclists
that you are approaching or passing.
• Stay Focused: Stay Alert - Never wear headphones; they hinder your ability to
hear traffic. Always look for obstacles in your path (potholes, cracks, expansion
joints, railroad tracks, wet leaves, drainage grates, or anything that could make you
fall). Before going around any object, scan ahead and behind you for a gap in traffic, signal your intentions to move, and then follow through with your intentions. Be
aware of the traffic around you. Ride defensively. Use extra care when riding in wet
weather, ice, frost, or snow. Slow your speed and allow extra time and space to
stop. Use extra care when crossing bridges which are extra slippery under wet
conditions. Use caution when crossing a railroad track; cross tracks at a 90-degree
angle and proceed slowly.
14
Wet Weather Riding
Whenever possible, you should avoid riding your bicycle in the rain. Riding a bicycle
in the rain is like driving a car in the snow. You will not be able to stop as fast and
must leave a larger distance between you and the obstacles around you. Your
brakes will not work as efficiently when they are wet. You will not be able to turn as
sharp without the danger of slipping. You must also ride away from or be cautious
around painted lines, pot holes, sewer or drain grates, rail road crossings, bridges,
wet leaves and any other area where a slippery surface can appear with water.
Keep an eye out for puddles and turn your lights on if you have them. If you live in
an environment where rain riding is expected, you should install front and rear
fenders if you have not already done so. Use a cover for your bicycle if leaving it
outdoors. Extensive rain can seep into the controller and battery and cause water
damage.
Night Riding
Almost anywhere in the world today, bicycle night riding requires front and rear
lights on your bicycle. Your S/T has built in headlight and taillight, that runs off the
main battery. Always wear retro-reflective clothing or material, not just white or
florescent, especially on your ankles, wrists, back, and helmet. Only ride in areas
familiar to you. Brightly lit streets are best. Always assume you are not seen by a
driver. Children should NOT ride at night.
RIDING YOUR S/T
First Motorized Ride
When you buckle on your helmet and go for your first familiarization motorized
ride on your new bicycle, be sure to pick a controlled environment, away from cars,
other cyclists, obstacles or other hazards. Ride to become familiar with the brake
levers against throttling, variable throttle performance while pedaling your new bike
and not pedaling. The first motorized ride should be initially pedaling and then
slowly pressing down on the throttle to feel the engagement of the HUB motor.
Familiarize yourself with the sensation of power.
15
• Familiarize yourself with the braking action of the bike. To test the brakes at slow
speed, shift your weight toward the rear and gently apply the brakes, rear brake
first. Sudden or excessive application of the front brake could pitch you over the
handlebars. Applying brakes too hard can lock up a wheel, which could cause you
to lose control and fall.
• Your bike has a front suspension system, familiarize yourself with how the suspension responds to braking application and rider weight shifts.
• Check out the handling and response of the bike; and check the comfort
• Start-up Procedure/LCD Basics/Lights
The LCD Screen has four buttons, ON/OFF, SET, UP, AND DOWN
16
Normal Operation Screen Illustration
• Hold on/off and LCD will go on. This will also turn on the electric bike system. The
LCD will provide Normal Default screen and will display:
Current Display - Shows discharge current, each mark is 2amps
Riding Mode Selection - There are three modes for riding with arrow selection,
Power, Normal, and Eco. The default option is Normal.
Riding Speed - Displayed in MPH or KM/H
PAS Level - Displays Pedal Assist Levels 1 through 5
Battery Current/Battery Level - BMS displays battery voltage, and battery level.
Odometer - Displays total distance traveled
17
• Backlight/Running Lights On - With the power on, click the on/off and turn on
the backlight. Click it again to turn off the backlight. Headlights/Taillights will go
on/off with Backlight.
• Pedal Assist Level Selection - Click UP or Down to change PAS level from 1 - 5.
• Riding Mode Selection - With LCD powered on, hold SET button until LCD
screen PAS level shows 0. Click UP or Down to move arrow to select POWER,
NORMAL, OR ECO riding mode. Once selected, push and hold on SET button until
screen goes back to normal.
• Shutting Down - On/Off button until LCD screen shuts down. Bike is now turned
off.
LCD Operation Manual: www.e-glide.com/lcdopperation
Suspension Fork
Your S/T is equipped with a Suntour XCR32 Air Suspension Fork. Features are
Magnesium Lowers, Pre-load Adjustment, Rebound Adjustment, Speed Lock out
Lever and 100mm travel.
• Speed Lock Out Lever - The lock out lever, found on the handlebars, allows for
instant full suspension or lock out (no suspension), by just pushing the lever.
18
• Pre-load Adjustment - Controlled by turning the knob on the top of the right
fork leg. Turn the knob clockwise to increase the spring pre-load, and counter
clockwise to decrease the spring pre-load.
• Adjusting Rebound Damping Rebound damping allows you to adjust the
speed with which the fork rebounds after
being compressed. Turn the adjusting
screw, found on the bottom of the right
fork tube, counter-clockwise (less damping) to increase the extension (rebound)
speed of your fork. To reduce the extension (rebound) speed, turn clockwise
(more rebound). To find the right rebound
speed, turn the adjusting screw as far
clockwise as possible (slowest extension).
Put your entire body weight on the suspension fork and let it rebound abruptly.
Now decrease the rebound gradually and
repeat this procedure until the suspension
fork almost jumps when it rebounds.
19
PARKING STORAGE & TRANSPORT
Please follow these basic parking, storage and transport tips to ensure your bike is
well cared for on and off the road.
• When pushing the vehicle manually, turn off the power to avoid accidental acceleration from the motor.
• It is recommended to park indoors. o Switch the power off, and any lights to
conserve battery. Remove the key from the bike and ensure the battery is locked to
the frame or removed and brought with you for security.
• If you have to park outdoors in rain, or wet conditions you should only leave your
ST outside for a few hours and proceed to park the bike in a dry location afterwards
in order to allow all the systems to dry out. Much like a regular bike, use in wet
conditions mandates a more regular maintenance schedule to ensure your bike
does not become rusty, corroded and to ensure all systems are always working
safely.
• Do not park, store, or transport your ST on a rack that is not designed for the size
and weight of the bike.
• Locking up your bike is recommended to ensure your bike is secure and the
chance of theft is reduced. Use a hefty lock, such as a Kryptonite lock. If there are
any doubts, remove your battery and seat, and cable lock the front wheel as well.
THIS BIKE IS A HIGH THEFT ITEM, BE SURE TO TAKE PRECAUTIONS.
• When storing your bike or carrying your bike on a rack for transport, you can
remove the battery pack to reduce the weight of the bike and make lifting and
loading easier.
20
MAINTENANCE & BICYCLE CARE
To ensure safe riding conditions you must properly maintain your bike. You should
follow these basic guidelines and see your certified local bike shop seasonally to
ensure your bike is safe for use.
• Properly maintain batteries by keeping them fully charged when not in use.
• Never immerse the bike or any components in water as the electrical system may
be damaged.
• Periodically check wiring and connectors to ensure there is no damage and the
connectors are secure.
• To clean, wipe the frame with a damp cloth soaked in a mild non-corrosive detergent mixture. Do not spray the bike with water. Dry with a cloth.
• Store under shelter; avoid leaving it in the rain or exposed to corrosive materials.
If exposed to rain, dry your bicycle afterwards and apply anti-rust treatment to
chain and other unpainted steel surfaces.
• Riding on the beach or in coastal areas exposes your bicycle to salt which is very
corrosive. Wash your bicycle frequently and wipe or spray all unpainted parts with
anti-rust treatment. Damage from corrosion is not covered under warranty so
special care should be given to extend the life of your bike when used in coast
areas or areas with salty air or water.
• If the hub and bottom bracket bearings have been submerged in water they
should be taken out and re-greased. This will prevent accelerated bearing deterioration.
• If the paint has become scratched or chipped in the metal, use touch up paint to
prevent rust. Clear nail polish can also be used as a preventative measure.
• Regularly clean and lubricate all moving parts, tighten components and make
adjustments and required.
21
TECHNICAL
Tire Pressure
WARNING: Never inflate a tire beyond the maximum pressure marked on the
sidewall. Exceeding maximum pressure may blow the tire off the rim, causing
damage to the bike and injury to the rider and bystanders.
WARNING: There is a safety risk in using gas station air hoses or other air com-
pressors. They are not made for bicycle tires. They move a large volume of air very
rapidly, and will raise the pressure in your tire very rapidly, which could cause the
tube to explode.
Tire pressure is given either as maximum pressure or as a pressure range. How a
tire performs under different terrain or weather conditions depends largely on tire
pressure. Inflating the tire to near its maximum recommended pressure gives the
lowest rolling resistance; but also produces the harshest ride. High pressures work
best on smooth, dry pavement. Very low pressures, at the bottom of the recommended pressure range, give the best performance on smooth, slick terrain such as
hard-packed clay, and on deep, loose surfaces such as deep, dry sand. Tire pressure that is too low for your weight and the riding conditions can cause a puncture
of the tube by allowing the tire to deform sufficiently to pinch the inner tube
between the rim and the riding surface.
CAUTION: Pencil type automotive tire gauges can be inaccurate and should not be
relied upon for consistent, accurate pressure readings. Instead, use a high quality
dial gauge
22
Tire, Tube, Wheel and Axle Repair
The S/T was designed for ease of servicing. Repairs are no more difficult than on a
traditional bicycle. Any neighborhood bicycle shop should be able to repair a flat,
change a tire or replace a wheel. Please review the following chapter on how to
remove and replace the front and rear wheel of your S/T.
Removing the Rear Motor Wheel
1. The wheel incorporates a motor wire quick disconnect for removing the wheel. To
remove the wheel following these instructions, it will only take a few minutes. Read
the instructions fully before first attempting to remove the wheel.
2. Prior to removing the wheel, shift the bicycle into gear 9 or 10 (the small
COG/sprocket on the rear cassette. It will be easy to remove the wheel if the chain
is at the end of the cassette. Make sure to spin the crank while shifting gears.
3. Remove the battery for safety.
23
4. To work on your bicycle, it may be easier to turn the bicycle upside down by
placing blankets on the ground and resting the bicycle on the saddle and handlebar.
5. Locate the motor disconnect weather proof plug on the left side of the bike
frame 6 inches from the motor axle and separate the connector. Cut the cable tie
with snips.
24
6. On each axle nut there is a rubber nut protector, remove these protectors simply
by pulling on them. On the wired side of the axle, slide the rubber protector up the
wire only a few inches.
7. Using a wrench, turn counter clockwise each axle nut until the axle washers are
loose.
8. Remove the wheel from the frame by pulling on the wheel.
9. The 10 speed freewheel mounted to the motor can be slid out away from the
chain with no issue. The spring of derailleur may cause the lower pulley to get in
the way of removing the wheel. Simply pull the pulley out of the way.
25
Installing the Rear Motor Wheel
1. The rear motorized wheel easily installs onto the rear frame dropouts within a
few minutes. Follow the instructions below on installing the rear motor wheel. One
cable tie will be needed to install the motor. Read the instructions fully before
attempting to install the wheel.
2. Pull or push the rear derailleur lower pulley with chain out of the way of the
dropouts.
3. Now check to make sure the chain is not in the way and align the wheel above
(below if bike is on kick stand and not upside down) the dropouts and pay attention
to the lining up of the disk brake rotor into the brake caliper (between the pads).
26
4. Prior to inserting the wheel into the dropouts, pull the chain onto the cassette.
5. Slide the motor into the frame dropouts by aligning the axle into the dropouts.
The axle has flat edges which require the axle to enter the dropouts from the
bottom. The axle with the motor wire protruding is to enter the left side dropout
(the left side is when standing behind the handlebar).
27
6. Now check to make sure the chain is not in the way and align the wheel with the
dropouts and pay attention to the lining up of the disk brake rotor into the brake
caliper (between the pads).
7. Each axle side has washers and a nut. Slide the washers over the axles and
tighten nuts by hand.
8. Using a wrench, fully tighten axle nuts. Axle nuts should be tightened to 250
lb*in.
9. Plug motor connection by aligning arrows on each end of the connector and slide
together.
10. Once connectors are plugged, you must test the connection.
Re-install the battery, turn on the bike.
Pull the motor wheel off the ground (if the bicycle is not upside down) and turn the
throttle to test the motor. If the motor turns, the connection is solid. If motor does
not turn, re check the motor cable connection
11.After confirming a solid connection, use a new cable tie to connect the motor
cable to the side of the frame and once tightened, cut off any excess amount.
Removing & Installing the Front Wheel
1.The front wheel on the S/T can be removed or installed without tools. A quick
release skewer through a hollow axle is utilized for easy and quick wheel removal.
A quick release skewer is a rod that has a threaded acorn nut on one end and a
cam lever assembly on the other end. The cam lever applies pressure and locks the
axle in place. The majority of higher quality bicycles produced in the last decade
incorporates this design. When removing the wheel, it will be easier to turn the
bicycle upside down and rest the bicycle in its saddle and handlebar. Place a few
blankets on the ground as not to scratch the saddle or handlebar controls. To
remove the wheel, follow these steps:
28
2. Locate the quick release and pull the quick release lever open and away from the
fork dropout.
3. Opening the quick release lever will loosen the grip on the fork and then loosen
the acorn nut to clear the safety tab sat fork dropouts. When installing the wheel, it
is the reverse process of ―removing the wheel’. Follow these instructions to install
the wheel:
4. Slide the wheel axle into the fork dropouts, confirming they are mounted in the
dropouts with no space.
5. Install the axle quick release skewer. With the quick release fully open, tighten
the acorn nut until a slight resistance.
6. Once tightened, close the quick release lever with force to clamp and lock the
axle into the dropouts. The force must be strong enough for the axle not to later
become loose. It should take some effort to close the lever but not so much that
you are straining or feel you are damaging the quick release. You should not be
able to easily open the quick release lever.
7. Test to see if the quick release lever will open with 1 finger. If it opens, you must
perform the previous step again until the quick release lever clamp is tight.
Motor Controller Replacement
The controller is considered the “brains” of the ebike and is located at the top of the
down tube behind the top battery mount. The controller has been designed to be
easily changed if an issue was to occur. To access the controller, you would need to
remove the top of the battery mount with a Philips screwdriver. If it ever needs to
be replaced, it’s just plug and play.
29
MAINTENANCE SCHEDULE
30
TORQUE SETTINGS
31
ONLINE RESOURCES
Assembly Instructions:
http://e-glidebike.com/index.php/bikes/e-glide-s-t-electric-bike
Brake Manual:
http://www.trpbrakes.com/userfiles/file/Tektro%20MTB/HDC330%20Manual.pdf
Bleed Instructions:
https://www.youtube.com/watch?v=HWssERgU2fw
Brake Pad Replacement:
https://www.youtube.com/watch?v=YFXEieKKtGo
Shimano Deore Derailleur Info and Adjustment:
http://cycle.shimano-eu.com/content/sacbike/en/home/components11/mountain/deore1/rd-m615-sgs-s.html
https://www.youtube.com/watch?v=wQncKmddahk
LCD Display Manual:
http://www.e-glide.com/lcdopperation
Suntour Fork Owners Manual:
http://www.srsuntour-cycling.com/fileadmin/user_upload/Downloads/Consumer/Bike/Owners%20manuals/2014/general-fork-manual-english-web.
pdf
32
WARRANTY
E-Glide S/T LIMITED 1 YEAR WARRANTY
ST’s bicycle components including frame, forks, stem, handlebar, headset, seat
post, saddle, brakes, lights, bottom bracket, crank set, pedals, rims, spokes, wheel
hub, freewheel, cassette, derailleur, shifter, motor, throttle, controller, wiring harness, LCD display, kickstand, reflectors and hardware are warranted to be free from
manufacture defects in materials and/or workmanship for a 1 year period from the
date of original purchase. Wear and tear is not covered under warranty. The lithium
ion batteries are warranted to be free from manufacturing defects in materials
and/or workmanship for a 1 year period from the date of original purchase. The
battery warranty does not include damage from power surges, use of improper
charger, improper maintenance or other such misuse, normal wear or water
damage.
TERMS OF WARRANTY
This warranty only applies to the original owner of a E-Glide S/T bicycle. This warranty does not apply to rental or commercial use bicycles. This warranty is expressly limited to the replacement of defective parts at the sole discretion of E-Glide.
This warranty does not cover any damage or defects resulting from failure to follow
instructions in the owner’s manual, acts of God, accident, misuse, neglect, abuse,
commercial use, alterations, modification, improper assembly, wear and tear, installation of parts or accessories not originally intended or compatible with the bicycle
as sold, operator error, water damage, extreme riding, stunt riding, or improper
follow-up maintenance. This warranty does not include consumables or normal
wear and tear parts (tires, tubes, brake pads, cables and housing, grips). E-Glide
will not be liable and/or responsible for any damage, failure or loss caused by any
unauthorized service or use of unauthorized parts. In no event shall E-Glide be
responsible for any direct, indirect or consequential damages, including without
limitation, damages for personal injury, property damage, or economic losses,
whether based on contract, warranty, negligence, or product liability in connection
with their products. All claims to this warranty must be made through E-Glide.
Proof of purchase may be required with any warranty request.
33
Loading...