Egardia MOV-31 Service Manual

INSTALLATION GUIDE MOTION DETECTOR

Congratulations on the purchase of your Egardia motion detector.

Customer Service

Please visit www.egardia.com if you would like further information about the installation and use of
Egardia. The answers to a number of frequently asked questions can be found at
www.egardia.com/userquestions.

This package has been put together with care. Please contact our customer service if you would like
any help during installation or if something is missing from the package. Never return a package
without prior instruction from our customer service.

Motion detector

The motion detector triggers an alarm when it detects movement within its field of view (detection
zone). The Egardia motion detector is specially designed to ignore pets up to 38 kg, like cats and
dogs. This significantly reduces the possibility of false alarms.

After the detector has sensed a movement and reported an alarm it automatically enters standby
mode to increase battery life.

OVERVIEW MOTION DETECTOR

1. Status indicator & Register button – Shows the status of the motion detector and also acts
as a register button for the motion detector.

2. Battery tab – After removal of this tab the motion detector is activated.

3. Screw – This opens the motion detector.

INSTALLING THE MOTION DETECTOR

The installation process of the Egardia motion detector consists of four easy steps.

STEP 1.

CHECK CONTENTS

CHECK THE CONTENTS OF THE BOX
STEP 2.

ADD TO ALARM SYSTEM

REGISTER THE MOTION DETECTOR WITH YOUR EGARDIA

ALARM SYSTEM

STEP 3.

MOUNT MOTION DETECTOR

DETERMINE THE LOCATION AND MOUNT THE MOTION

DETECTOR

STEP 4.

CHECK AND TEST

CHECK AND TEST THE MOTION DETECTOR

STEP 1: CHECK CONTENTS

Check the contents of the packaging for the following parts:

1. Motion detector (battery is factory installed in the motion detector)

2. Bag containing screws and plugs

3. Double-sided tape for mounting

1