Egardia KEYP-31 operation manual

installation guide

Key pad

1

INSTALLATION GUIDE KEY PAD

Website Egardia

www.egardia.com

Congratulations on the purchase of your Egardia key pad.

Customer Service

Please visit www.egardia.com if you would like further information about the installation and use of
Egardia. The answers to a number of frequently asked questions can be found at
www.egardia.com/userquestions.

This package has been put together with care. Please contact our customer service if you would like
any help during installation or if something is missing from the package. Never return a package
without prior instruction from our customer service.

Key pad

The key pad is an easy way to operate your Egardia alarm system from inside your home. Each
registered user is able to turn the alarm system on or off using his/her valid PIN code. Also, the key
pad allows you to partially activate your alarm system (ON, partially). This is particularly useful for
e.g. safeguarding the downstairs floor while you are sleeping upstairs.

When the button "HELP" is pressed a panic alarm will be triggered and all your registered contact
will instantly receive an alarm message.

In your Egardia account you can enter a PIN code for each authorized user. Via the tab "Alarm
history" you can always see which particular user has turned the alarm system on or off.

Please note! By both burglar alarms and panic alarms the gateway will emit a very constant and
loud audible signal. A panic alarm can only be deactivated by the key pad. Enter a valid PIN code
and press to deactivate the panic alarm.

OVERVIEW KEY PAD

1. Indicator light Activity (green) – The green indicator light glows for a few seconds after

a button has been pressed.

2. Indicator light Transmit (red) – The red indicator light flashes a few times to indicate a

signal is being sent to the gateway.

3. Fault light (orange) – The orange indicator light flashes continuously when the batteries

need replacing.

4. Mounting holes – Situated under the 2 caps are the mounting holes.

Key pad keys:

 Numerical keys (1 – 9, *, 0, #): To enter PIN codes.

 : Enter [PIN code] followed by to deactivate the alarm ("OFF").

 : Enter [PIN code] followed by to activate the alarm ("ON").

 : Enter [PIN code] followed by to partially activate the alarm ("ON, partially").

 : Press to immediately activate the panic alarm function.