Egardia KEYF-31 Service Manual
INSTALLATION GUIDE KEY FOB
Congratulations on the purchase of your Egardia key fob.
Customer Service
Please visit www.egardia.com if you would like further information about the installation and use of
Egardia. The answers to a number of frequently asked questions can be found at
www.egardia.com/userquestions.
This package has been put together with care. Please contact our customer service if you would like
any help during installation or if something is missing from the package. Never return a package
without prior instruction from our customer service.
Key fob
The key fob allows you to easily turn your alarm system on or off at the push of a button. The key
fob also features a panic button to notify immediately all your registered contacts. The alarm system
does not need to be activated to use this function.
Also, the key fob allows you to partially activate your alarm system (ON, partially). This is
particularly useful for e.g. safeguarding the downstairs floor while you are sleeping upstairs.
All users may have assigned their own key fob. Via the tab "Alarm history" in your Egardia account
you can always see which particular user has turned the alarm system on or off.
Note! In case of a burglar alarm or a panic alarm the gateway will emit a very loud audible signal. A
panic alarm can only be turned off using the key pad. Enter a valid PIN code and press the green
lock icon button to turn the panic alarm off.
OVERVIEW KEY FOB
1. “ON” button – To turn your alarm system on.
2. “ON, partially” button – To turn the alarm system on while you are at home. Configure
in your Egardia account which accessories should be active while you are at home and
the alarm is turned on.
3. Battery compartment – Holds the battery.
4. Indicator light– Glows when a signal is being sent to the gateway. To ensure that the
signal has been successfully sent hold the button till the indicator light extinguishes.
5. “OFF” button – To turn your alarm system off.
6. “HELP” button – Press for at least 3 seconds to activate the siren of the gateway and
automatically send alarm messages to all your registered contacts. The alarm system
does not need to be activated to use this button.
INSTALLING THE KEY FOB
The installation process of the Egardia key fob consists of four easy steps.
STEP 1.
CHECK CONTENTS
CHECK THE CONTENTS OF THE BOX
STEP 2.
INSERT BATTERY
INSTALL THE BATTERY INTO THE KEY FOB
STEP 3.
ADD TO ALARM SYSTEM
REGISTER THE KEY FOB WITH YOUR EGARDIA ALARM
SYSTEM
STEP 4.
CHECK AND TEST
CHECK AND TEST THE KEY FOB
1
Loading...