FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS MAY RESULT IN FIRE, ELECTRIC SHOCK,
INJURY TO PERSONS, OR DAMAGE TO OTHER ITEMS OR PROPERTY.
You must read and follow these instructions, heed all warnings, before using this product. Please keep
this guide for future reference.
About warnings and cautions
WARNING
CAUTION
Indicates a hazard that could result
in death or serious injury
Indicates a hazard that could result
in injury or property damage
About the symbols
"Caution": Calls your attention to a point of
caution
"Do not ...": Indicates a prohibited action
"You must ...": Indicates a required action
WARNING
To reduce the risk of re or electric shock, do
not expose this product to rain or moisture
Do not use or store in the following locations
• Locations subject to water or rain
• Moist or humid locations (near a bath or shower,
or on a wet oor)
• High temperature locations (in direct sunlight,
near heating equipment)
• Locations subject to salt damage
• Excessively dusty locations
Turn the power o if an abnormality or
accident occurs
In the following situations, immediately turn o the
power, disconnect the AC adapter from the AC outlet,
and contact your dealer.
• If the AC adapter, power cord, or plug is damaged
• If smoke is emitted or an abnormal odor is noticed
• If liquid or a foreign object enters the product
• If an abnormality or malfunction occurs in the
product
Do not plug or unplug the AC adapter with
wet hands
You risk electric shock.
Do not drop or subject to strong impact
Do not drop this product or subject it to strong
impact.
Do not disassemble
Do not disassemble or modify this product and AC
adapter.
Do not damage the power cord
Do not excessively bend the power cord or damage
it. Do not place heavy objects on top of the power
cord. Doing so may damage the power cord, causing
re or electric shock.
Use the included AC adapter
Use only the included AC adapter. Use the adapter
with the voltage that it species.
CAUTION
Do not place the product in an unstable
location
Doing so may cause the product to overturn, causing
personal injury.
Do not sit or stand on the product, or place
heavy objects on it
Doing so may damage the product.
You should also avoid applying excessive force to the
buttons, knobs, display, and input/output jacks. Doing
so will cause malfunctions.
Do not use the product at a high volume for
an extended time
Using speakers or headphones at high volume for an
extended time will damage your hearing.
Grasp the power plug when connecting or
disconnecting
When connecting or disconnecting the AC adapter
from the product, you must grasp the plug rather
than pulling the power cord.
Disconnect the power plug from the AC
outlet during lightning storms or when
unused for long periods of time
Failure to do so may cause electric shock, re, or
malfunction.
Disconnect all connections before moving
the product
Failure to do so may cause damage to the power cord
or cables, or may cause people to trip over the cables.
Handle the product with care
Take care that your hands or ngers are not injured by
corners, edges or openings of the product.
Keep small parts out of reach of children
Keep small parts out of reach of children who might
accidentally swallow them.
Supervise or give guidance when children
use this product or children are present
around this product
Always take care that children are not injured with
this product.
2
Page 3
IMPORTANT SAFETY INSTRUCTIONS
Important Information
Power supply
• A small amount of current ows even when the power
is turned o. If you will not be using this product for an
extended period of time, you may desire to unplug the AC
adapter from the AC outlet.
Regulatory compliance for radio emission devices
• You should keep turning the Bluetooth o when using the
product in a country/region other than where it sold.
• The following actions may violate the law.
- Disassembling or modifying this product.
- Removing the certication label on the product.
Placement
• Do not use this product near other electrical products
such as televisions, radios. This product may cause noise in
televisions or radios.
Cleaning
• Use a soft dry cloth to clean the product. Do not use
benzene, thinner, detergent, or chemically treated cloth,
since these can cause deformation or discoloration.
Data
• Please be aware that the manufacturer bears no
responsibility for any consequences that may arise from
damage to or loss of data.
• In some cases, equipment malfunction or incorrect operation
can cause the contents of the memory to be lost. Please
make a backup of any important data that is in the memory.
* Ef-Note Inc. cannot be held responsible for damage caused by improper use or modications to the product, or loss of data.
For EU countries
Ef-Note Inc. hereby declares that the type of radio equipment EFNOTE 7X (EFD7X-STDSET) complies with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at : ef-note.com/compliance
Copyright
• Duplication or reuse of the music and sound data contained
in or included with this product without permission from the
copyright holder is forbidden (with the exception of copying
for personal use as permitted by copyright law).
• Copyright for the content (sound data, phrase data, audio
data, image data, computer programs, etc.) contained in or
included with this product is the property of Ef-Note Inc.
Copyright law forbids you to use the above content without
permission of Ef-Note Inc. for any purpose other than
personal use.
• The above content that is contained in or included with this
product may not be resold, distributed, or published, neither
in its existing form nor in any way that resembles it.
Others
• ASIO is a trademark and software of Steinberg Media
Technologies GmbH.
• The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc..
• Company names or product names etc. appearing in this
document are the registered trademarks or trademarks of
their respective corporate owners.
• EFNOTE is a trademark or registered trademark of Ef-Note Inc.
• All illustrations and screens appearing in this document are
for the purpose of explaining operation, and may dier from
the actual product or specications.
This symbol on the product means that used electrical and electronic equipment should not be mixed with general household
waste. The correct disposal will help prevent potential negative eects on human health and the environment. For proper
treatment, recovery and recycling, please contact your city oce, waste disposal servicer or the shop which you purchased the
product.
For the USA
WARNING
This product contains a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
For the EFNOTE 7X Reference Guide, optional components, or other latest information,
please refer to the EFNOTE 7X website.
ef-note.com/products/drums/EFNOTE7X/efnote7x.html
Page 5
Assembling
Packing List
Assembling
Sound Module1x
A
20” Kick1x
B
14” Snare with Side-Rim 1x
C
11” Tom1x
D
13” Floor Tom1x
E
15” Floor Tom1x
F
14” Hi-Hat Cymbals1x
G
16” Standard Cymbal1x
H
17” Eect Cymbal1x
I
8” Splash Cymbal1x
J
20” Ride Cymbal1x
K
Smartphone Tray1x
L
Floor Tom Leg6x
M
Splash Mount Set1x
N
Module Mount Set1x
O
Multi-AX Cable1x
P
Multi-B Cable1x
Q
Trigger Cable4x
R
AC Adapter1x
S
Beater Patch1x
T
Hex Key1x
U
Cymbal Mount
V
Extension + Felt (2x)
Tuning Key1x
Cable Tie10x
Quickstart Guide1x
1x
PNOQRSTVU
4x
H
D
J
N
K
I
G
C
E
A
L
B
* Kick pedal, hi-hat stand, snare drum stand, tom stand, cymbal stands are not included.
* Snare drum stand, tom stand, cymbal stands are sold separately.
5
F
M
Page 6
Assembly
Assembling
CAUTION
Please take your time with assembly and contact us with any questions (p. 19).
12
B
* Kick pedal is
not included.
* Be careful with the spikes
3
* Tom stand is sold separately
EFD
2x
M
M
M
H
N
* Cymbal stands are sold separately
J
K
I
6
Page 7
Assembling
4
O
* Hi-hat stand is not included.
6
5
A
G
1
O
2
A
D
L
* Be sure to tighten all knobs and bolts rmly.
* Make sure that all stands are stable.
* Be careful that your smartphone does not fall from the smartphone tray.
G
C
* Snare drum stand is sold separately.
7
E
F
Page 8
Flex Cymbal Mount STAK™
The C17FX eect cymbal comes with a STAK feature which realizes a exible cymbal mounting style.
Stacked with splash
1
3
Assembling
V
* You can hit the each cymbal
individually, or both simultaneously.
Suspended
Pass the splash cable through
the hole and pull it down.
2
1
Pass its own cable through the
hole and pull it up.
Then put the cable
into the slit.
3
V
8
Page 9
Adjusting the Side-Rim Position
The side-rim can be moved side to side, to
adjust its position.
Loosen the bolts shown in the gure with
included hex key, and adjust the position, then
tighten up the bolts again.
Attaching the Beater Patch
Attach the beater patch to where the kick pedal beaters touch on the
head of the kick.
* Playing without the beater patch may cause damage of the head.
* The beater patch is a consumable item. Replace when it has worn.
Tuning the Head Tension
Make sure the mesh drum heads are not to loose.
Tighten up the tuning bolts evenly with the tuning key, if needed.
* The mesh drum head is a consumable item. Replace when it has worn.
Side-Rim
Assembling
U
T
10
6
1
7
3
4
8
2
5
9
9
Page 10
Connection
A
1
Connection
4x
3
4
P
Q
Firmly attach the included plug which is
suitable for the outlet in your region.
* Use only the included AC adapter and plug.
S
A
S
Stereo Mini
Powered Monitor Speakers
* Sold separately
* Not included
OUT 2/R
OUT 1/L
1/4” Phone
MIDI OUT
10
Page 11
2
CRASH1 CUP*
CRASH1
Connection
RIDE
RIDE CUP
HH CTRL
P
Q
TOM4*
CRASH3
SIDE RIM
CRASH2
* The EFNOTE 7X does not include Tom 4 pad in the
package.
* You can use the TOM 4 cable for the Crash 1 Cup.
See the reference guide PDF for the detail.
CRASH3
TOM1
SNARE
SIDE RIM
TOM2
TOM3
KICK
RRRR
RIDE
CRASH1
RIDE CUP
CRASH1 CUP
CRASH2
BOW/
EDGE
CUP
* Tie the
HH cable
* Clamp the
cymbal
cables
SIDE RIM
11
Page 12
Basic Operation
Panel Description
Basic Operation
Touch display
Micro USB
(To PC/Mac)
Ring illumination
Power (Push)
Value knob (Rotate)
Linear Indicator
Speaker for click
(Inside)
Power On/O
Power On
1
1 sec.
Power O
2
1 2 3 4
* Without this procedure may result in loss of changes.
* The power save function will turn power o automatically after specied period. It can be disabled (p. 17).
12
Page 13
Home Screen
Switching drum kits
Basic Operation
Shows kit list
Previous
drum kit
Volume
Analog AUDIO IN level
USB audio in level
Bluetooth audio in level
Phones output level
CAUTION
volume. It can cause permanent hearing loss.
Be sure not to listen to audio at a high
Inst Info
Instrument assigned to the pad
Pad level
* Clipping may occur when exceeding 85%.
Next
drum kit
Recorder
Records your drum performances by MIDI.
* Any other audio sources are not recorded.
Clears target track
Goes to recording stand-by
Plays target track
Selects target track
Rec Standby
Starts when strike
Starts recording
Cancels recording
Status
Recording
Click (Metronome)
Tempo (BPM)
Beat (Time signature)
Click level
Activates/deactivates
external click speaker
Turns click on/o
Stops recording
Status
Playing
Fast forward
Fast backward
Stops playing
Status
13
Page 14
Menu
Organizes drum kits for gigs
Manages your user custom instruments
Shows the pad level faders (p. 15)
Changes instrument on each pad (p. 15)
Edits drum kit
Provides basic drum beats
Estimates your strike accuracy
Displays your strike points on timeline
Congures click setup
Closes menu
Congures general settings
Congures triggers (pads)
Connects Bluetooth device (p. 16)
Shows the volume control
Basic Operation
For the detailed information about screens can be accessed from the menu,
please refer to the “Reference Guide” available on the website below.