EFG Active Assembly Instructions Manual

EFG Active

Assembly Instruction 039115

For more information,
please visit www.efg.info

039115/ Produced by: EFG Marketing Support

The product contains one or more of following materials:

Metal, plastic, wood, fabric, foam.

100kg

2 3

EFG Active - Frame assembly

Step 1 - Assembly beams, legs, hooks, spacer and decal.

Recommended beam length for following table top length:

1600 = Beam length 1248 mm (Overhang on table according to page 7)
1800 = Beam length 1548 mm (Overhang on table according to page 7)

For sliding table top = Do not lock beams and let the inserts in the

table top guide you, see pages 9 or 11 depending on which sliding
bracket being assembled.

x8 (M8x16)
Match colour of screw to
colour of side support

Mount the sidebars with
the EFG logo outwards.

EFG Active - Frame assembly

Step 2 - Assembly foot and sidebars.

Warning decal positioned
towards the end user.

x4 - Cable hook

x4 - Bumper

x8 (M8x25)

Hole in hook should be
concentric with hole in
crossbar.

Wiggle the leg when mounting the
beams. It makes it easier to mount the
screws.

Warning decal.