Efficient Networks SpeedStream 5251, SpeedStream 5260 Quick Start Manual

SpeedStream® 5251/5260

DSL LAN Modem

Quick-Start Guide

007-0066-002

Before you begin:

Verify that the following items came with your DSL kit:

Documentation

R-11 DSL cable

RJ-45 Ethernet cable

straight-through

RJ-45 crossover

(Xover) Ethernet cable

Line filter(s)PCI Ethernet adapter

Wall-mount line filter

Power supply

Two-to-one adapter(s)

Your service provider may include a wall-mount filter, two-to-one adapter(s), line filter(s), and an Ethernet

adapter in your DSL kit. If you received any of these items, follow the instructions provided in this guide for

basic installation. If you need further assistance installing these items, please contact your service provider.

5251 or 5260 Modem

Step

Step

Two-to-One Adapter

If your DSL modem and another device will share the same phone jack, install a two-to-one adapter:

1. Plug adapter into the phone jack.

2. Plug a line filter into one of the sockets of

the two-to-one adapter. The other socket will
be used to connect the DSL cable.

3. Plug the telephone (or other device) cord
into the line filter.

For each device that shares the DSL phone number:

1. Unplug the device’s cord from the phone jack.

2. Plug the filter into the phone jack.

3. Plug the phone cord (or other device cord)

into the filter.

Stand-alone Line Filter

1

Wall Mount Filter

2 3

For a wall mount phone, install a wall mount filter:

1. Remove the phone.

2. Connect the wall mount filter to the wall plate.

3. Reconnect the phone.

1

1

2

3

2

3

1

Install Line Filters