EFB K0993.10 User Manual
DATASHEET
DATASHEET
RJ45 Patch cable S/UTP, Cat.5e, 1x TM11 90° / TM11, PVC,
RJ45 Patch cable S/UTP, Cat.5e, 1x TM11 90° / TM11, PVC,
black
black
Description
The Cat.5e RJ45 patch cable manufactured in Europe guarantees very good characteristics for 2.5 Gigabit Ethernet
applications. The patch cable is composed of the raw cable CU 5502 flex from Daetwyler and TM11 connectors
from Hirose. One of the two grommets is angled at 90°. As a result, the patch cable is well suited if there is limited
space available on one connection side
Cross section 4 x 2 x AWG26/7
Mounted anti-kink grommet
Clear distinction of the cores in the assembled connector thanks to different core colours (black, green, red, blue,
white, orange, yellow, brown)
General data
Category 5E
Type of connector connection 1 RJ45 8(8)
Type of connector connection 2 RJ45 8(8)
Connector type TM11
Cable type Dätwyler CU 5502 flex
Contacts Gold plated
Pin assignment 1:1
Allocation acc. TIA/EIA 568B
Type Shielded
Anti-kink sleeve put-on
Colour anti-kink sleeve black
Locking lever No
Mechanical characteristics
Mating cycles ≥750
Bending radius >20 mm
This datasheet was created automatically on 05-02-2020 . Technical changes reserved.
This datasheet was created automatically on 05-02-2020 . Technical changes reserved.
EFB-Elektronik GmbH
EFB-Elektronik GmbH
Striegauer Straße 1
Striegauer Straße 1
33719 Bielefeld
33719 Bielefeld
fon: +49 521 40 41 8-0
fon: +49 521 40 41 8-0
fax: +49 521 40 41 8-50
fax: +49 521 40 41 8-50
info@efb-elektronik.de
info@efb-elektronik.de
www.efb-elektronik.de
www.efb-elektronik.de
Page 1/3
Page 1/3
DATASHEET
RJ45 Patch cable S/UTP, Cat.5e, 1x TM11 90° / TM11, PVC,
black
Mechanical characteristics
Conductive shield 360° shield contact
Cable construction
Cable structure S/UTP
Cable construction 4x2
AWG-size/strands per core 26/7
Conductor Material Copper
Cable sheath
Jacket material PVC
Colour outer sheath black
Outer diameter of the cable 5.1 mm
Environmental conditions
Temperature Range (Operation) -20 – 60 °C
Temperature Range (Installation) 0 – 50 °C
Electrical characteristics
NVP value 76 %
Impedance 100 ±15 Ω
Conductor resistance DC 113 Ω/km
Loop resistance 225 Ω/km
Transmission characteristics
Bandwidth 100MHz
Transmission 2.5Gbit
Standards, approvals, certifications
Connector IEC 60603-7-3
Available variants
Article no. Title Length
K0993.0,5 RJ45 Patch cable S/UTP, Cat.5e, 1x TM11 90° / TM11, PVC, 0,5m, black 0.5 m
K0993.1 RJ45 Patch cable S/UTP, Cat.5e, 1x TM11 90° / TM11, PVC, 1m, black 1.0 m
K0993.3 RJ45 Patch cable S/UTP, Cat.5e, 1x TM11 90° / TM11, PVC, 3m, black 3.0 m
K0993.5 RJ45 Patch cable S/UTP, Cat.5e, 1x TM11 90° / TM11, PVC, 5m, black 5.0 m
K0993.10 RJ45 Patch cable S/UTP, Cat.5e, 1x TM11 90° / TM11, PVC, 10m, black 10.0 m
This datasheet was created automatically on 05-02-2020 . Technical changes reserved.
EFB-Elektronik GmbH
Striegauer Straße 1
33719 Bielefeld
fon: +49 521 40 41 8-0
fax: +49 521 40 41 8-50
info@efb-elektronik.de
www.efb-elektronik.de
Page 2/3
Loading...