10. Warning and Precautions ............................................................................................. 20
2
Restricted
Safety and use
We recommend that you read this chapter carefully before using this
device. The manufacturer disclaims any liability for damage, which may
result as a consequence of improper use of this device or of use contrary
to the instructions contained herein.
Do not switch on your device when the device use is
prohibited or when the device use may cause interference or
danger.
Follow the rules or regulations in hospitals and health care
facilities. Switch off your device near medical apparatus.
Switch off your device in an aircraft. The device may cause
interference to control signals of the aircraft.
Switch off your device near high-precision electronic devices.
The device may affect the performance of these devices.
Do not attempt to disassemble your device or its accessories.
Only qualified personnel are allowed to service or repair the
device.
Do not place your device or its accessories in containers with
strong electromagnetic field.
Do not place magnetic storage media near your device.
Radiation from the device may erase the information stored
on them.
Do not put your device in a high-temperature place or use it in
a place with flammable gas such as a gas station.
Keep your device and its accessories away from children. Do
not allow children to use your device without guidance.
Use approved batteries and chargers only to avoid explosion.
Observe the laws or regulations on device use. Respect others’
privacy and legal rights when using your device.
It is recommended that the equipment only be used in the environment
where temperature is between -10℃ and 50℃ and humidity is between
10% to 90%.
1. Overview
This device allows you to share a secure Mobile Broadband internet
connection using WiFi. You can connect most WiFi enabled devices to it
(for example PCs, mobile gaming devices, Smart phones, tablet).This
device should not be used in a confined space where air flow is limited,
for instance inside a jacket pocket or inside a hand bag etc.
3
Restricted
1.1 System Requirements
To use this device you need a device with WiFi capability (supporting WiFi
802.11 b/g/n) and a web browser.
1.2 Screen description
The description for the Screen as below:
Screen
description:
Number
1
2
3
4
5
6
7
8
Description
Network Signal( Dynamic graphical symbol )
Network type (4G/H+/H/3G/2G)
SMS status(Full, unread, incoming)
Connection status(Connected and Disconnected )
WiFi (Number of user connected/WPS
connection)
Battery level(Dynamic graphical symbol/In charge)
Name of the network registered
Roaming status
10
Current volume used(MB/GB)
Dial mode(Manual/Automatic)
4
Screen icon
Restricted
Category
Signal Strength
Network type
SMS status
Connection
Status
WiFi status
Battery
Dial mode
Icon display
From 1 signal to excellent signal
: EDGE/GPRS : UMTS /HSDPA/HSUPA
3G+:HSPA+
:SMS is available
:Unread SMS
:SMS is full
connected
: WiFi is active
:Number of WiFi users
:WPS is active
:WPS connected successfully
:WPS connected failed
: From 1 level to 4 level
:Low power
:automatic
:manual
:LTE
Roaming
:on roaming network
Note: the information is displayed for 20 seconds, then the display
powers off. You can short press any button to active the display again.
1.3 How to connect in WiFi mode
Step 1: Use the WiFi manager on the WiFi embedded device to
select network name (SSID).
◆ From a Windows PC:
1. Right-click Wireless network connection on the task bar
2. Select View Available Networks
3. Choose SSID (Service Set Identifiers) from the list of available
Networks
◆ From a Mac computer:
1. Select System Preferences
2. Select Airport
3. Select SSID from the dropdown menu.
◆ From an iOS device:
5
Restricted
1. Select Settings
2. Select WiFi
3. Select SSID from the available Networks.
◆ From an Android device:
1. Select Settings
2. Select Wireless Controls
3. Select WiFi settings
4. Select SSID from the available Networks
Step 2: Enter the WiFi key when prompted for a security key.
(Note: The passkey is the last 8 digits of the IMEI)
2. Web UI configuration
2.1 How to login to the Configuration page
1. Open the Configuration Page
2. Input into the address bar http://ee.mobilebroadband or
http://192.168.1.1. The page below will be displayed:
Fig 2.1
3. Click "Settings" and login to configure the basic settings
User name: admin
Login Password: admin
6
o signal to
excellent
Restricted
Fig 2.2
2.2 Main page
icon descriptions
Category
Signal Strength
Connection
Status
SMS
Battery
Roaming
SIM card status
WiFi status
Icon display
From n
Disconnect Connected
enable, Unread
From lowest power to full power
:charging
in roaming network
SIM card is ready;;SIM card is not ready
WiFi is active; WiFi is deactive
Tab 2.1
7
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.