Eemax PR008240, PR011240, PR013240, PR018240, PR024240 User Manual
...
ProSeries
™
For Single Point-of-Use or Multiple Applications
Applications
•
Handwashing 0.5-2.2 GPM
•
Standard Hand Sink 0.5 GPM
•
Kitchen Sink 2-2.5 GPM
•
Mop Sink 2-4+ GPM
•
Dishwasher 1-2 GPM
Average Gallons Per Minute (GPM) based on 2010 Plumbing Standards
Performance Features
•
Instant, consistent and endless hot water
•
Protected internal temperature control
•
Copper immersion heating elements with brass top increases
durability and are threaded for easy replacement
•
Simple Installation
•
Internal temperature control adjustable in increments of 1°F
•
8-13kW units: Temperature range 80°-140°F
•
18-36kW units: Temperature range 80°-180°F
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Specications
Tankless Electric Water Heater
PR008240/PR011240/PR13240 PR018240
Suggested Specication
Tankless water heater shall be an Eemax ProSeries model number
PR_______________.
Unit shall have copper clad immersion heating element(s) with
brass terminations for increased durability. Temperature control
and display to be internal to the unit, and adjustable in 1°F
increments with a range of 80°-140°F; 80°-180°F on 18-36kW
units. Display shall be capable of displaying setpoint temperature
in Centigrade or Fahrenheit temperature scales. Unit shall utilize
a ow meter with a 0.3 GPM activation point and manage power
based on actual ow rate and inlet temperature. Values should be
processed 60 times per second. Unit shall be WQA certied lead
free, certied to UL499 and CSA-C22.2 No. 64.
Eemax Inline Flow Regulator
EEMAX PART NUMBER
IFR 1-2
IFR 3-4
•
Enhanced outlet temperature control
•
Install on the outlet side of the heater
•
Limit maximum volume to the specied ow rate to ensure
GPM RATING OF
INSERTS PROVIDED
1.0, 1.5, 2.0 1/2" NPT
2.0, 3.0, 4.0, 5.0 3/4" NPT
CONNECTION SIZE
exiting temperature is within an acceptable range
•
Flow Regulators for ½" and ¾" plumbing connections
•
Restriction range: 1.0 to 5.0 gallons per minute
PR024240/PR027240 PR036240
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets NSF/ANSI 372
Eemax Inline Flow Regulator Suggested Sizing Guide
Inlet Water Temperature
40°F 50°F 60°F 70°F
PR008240
PR011240
PR013240
PR018240
PR024240
PR027240
PR036240
*Selection based on inlet temperature and an outlet temperature setting of 105°F
IFR 1-2 1.0 1.0 1.0 1.5
IFR 1-2 1.0 1.0 1.5 2.0
IFR 1-2 1.0 1.5 2.0 2.0
IFR 3-4 2.0 2.0 2.0 3.0
IFR 3-4 2.0 2.0 3.0 4.0
IFR 3-4 2.0 3.0 4.0 5.0
IFR 3-4 3.0 4.0 5.0 5.0
IFR 1-2
1/2" NPT
Inserts Included
1.0 GPM 1.5 GPM
3/4" NPT
Inserts IncludedIFR 3-4
2.0 GPM 3.0 GPM
*
Information and product specications contained in this document are subject to change without notice. REV 2020-01
2.0 GPM
4.0 GPM 5.0 GPM
15
ProSeries
5.9
17.0
3.4 17.0
1.4
9.8
17.0
3.4 20.8
1.5
5.9
17.0
3.4 13.9
1.5
9.9
8.8
For Single Point-of-Use or Multiple Applications
Specications
Tankless Electric Water Heater
MODEL NUMBER
VOLTS 240*
C
PR008240
C
PR008240 (derated 208V performance)
C
PR011240
C
PR011240 (derated 208V performance)
C
PR013240
C
PR013240 (derated 208V performance)
C
PR018240
C
PR018240 (derated 208V performance)
C
PR024240
C
PR024240 (derated 208V performance)
C
PR027240
C
PR027240 (derated 208V performance)
C
PR036240
C
PR036240 (derated 208V performance)
Product
Specications
kW AMPS
8.0 33(1x40) 8 AWG 0.3 4.8 109° 55° 36° 27° 22° 18° 14° 11° –
5.8 28 8 AWG 0.3 4.8 79° 40° 26° 20° 16° 13° 10° 8° –
11.0 46(1x50) 8 AWG 0.3 4.8 † 75° 50° 38° 30° 25° 19° 15° –
8.2 40 8 AWG 0.3 4.8 † 56° 37° 28° 22° 19° 14° 11° –
13.0 54(1x60) 6 AWG 0.3 4.8 † 89° 59° 44° 36° 30° 22° 18° 15°
10.1 49(1x60) 6 AWG 0.3 4.8 † 69° 46° 34° 28° 23° 17° 14° 11°
18.0 75(2x38) 8 AWG 0.3 7.0 † 123° 82° 61° 49° 41° 31° 25° 20°
13.3 64(2x32) 8 AWG 0.3 7.0 † 91° 61° 45° 36° 30° 23° 18° 15°
24.0 100(3x33) 8 AWG 0.3 7.0 † † 109° 82° 66° 55° 41° 33° 27°
17.5 84(3x28) 8 AWG 0.3 7.0 † 120° 80° 60° 48° 40° 30° 24° 20°
27.0 113(3x37) 8 AWG 0.3 7.0 † † 123° 92° 74° 61° 46° 37° 31°
20.0 96(3x32) 8 AWG 0.3 7.0 † 137° 91° 68° 55° 46° 34° 27° 23°
36.0 150(4x38) 8 AWG 0.3 8.0 † † † 123° 98° 82° 61° 49° 41°
26.6 127(4x32) 8 AWG 0.3 8.0 † † 121° 91° 73° 61° 45° 36° 30°
Dynamic Operating Pressure: 25 PSI min., 150 PSI max.
Certications: ETL Listed to UL499 and CSA-C22.2 No. 64
RECOMMENDED
WIRE SIZE
(75° C/CU)
TURN ON
(GPM)
MAX FLOW
(GPM)
0.5
GPM
Temperature Accuracy: +/–1° at steady state
PR008240/PR011240/PR013240
Size: 11.5"H 8"W x 3.75"D
Weight: 8 kw: 4.75 lb, 11 kw/13 kw: 7 lb
Unique Features: Welded exchanger, 1/2" compression ttings with 1/2" NPT
adapters included
PR018240
Size: 17"H x 14"W x 3.75"D
Weight: 11.25 lb
Unique Features: Welded exchanger, 3/4" NPT ttings
Adj. Temp. Range: 80°F-180°F
Adj. Temp. Range: 80°F-140°F
GPM
1.0
1.5
GPM
TEMPERATURE RISE °F
2.0
2.5
GPM
GPM
3.0
GPM
4.0
GPM
5.0
GPM
* 240V units can be used on 208V
GPM
6.0
single phase with 25% reduced
temperature output. Please note
per UL standards the rating plate
and installation instructions will all
be according to a 240V applied
voltage. Check with local ofcials
prior to derating the electrical
infrastructure.
† Temperature electronically limited
setting on adjustable thermostat
on front cover
"C "indicates evaluation and
compliance to either Underwriters
Laboratories (UL) or Intertek (ETL)
under CAN/CSA-C22.2 No. 64/
No. 88.
3.4
PR024240/PR027240
Size: 17"H x 17"W x 3.75"D
Weight: 13.75 lb
Unique Features: Welded exchanger, 3/4" NPT ttings
Adj. Temp. Range: 80°F-180°F
16.0
7.9
11.4
12.2
1.9
12.9
15.1
1.6
PR036240
Size: 17"H x 21"W x 3.75"D
Weight: 17.4 lb
Unique Features: Welded exchanger, 3/4" NPT ttings
Adj. Temp. Range: 80°F-180°F
19.8
15.1
2.8
15.1
3.2
16
Information and product specications contained in this document are subject to change without notice. REV 2020-01
Loading...