E+E Omniport30 Specifications

Page 1

OMNIPORT 30

Multifunctional Hand-Held

The robust multifunctional hand-held meets the highest requirements and comes with a wide range of accurate probes that fit various applications. Use touch-screen navigation to show, up to three measurement values simultaneously on the capacitive TFT display.

A total of 23 measurands (vary according to probe) is available, including:

• relative humidity RH

• temperature T

• dew point temperature Td

• absolute humidity dv

• mixing ratio r

• air velocity v

• volumetric flow

• air pressure p

• CO

Store measurement values in the internal memory of the device and use the free SmartGraph3 software to manage data on your PC. The optional carrying case accommodates the hand-held and probes, as well as accessories.

ppm

OMNIPORT 30

with CO2 probewith RH/T probe

Data-Logging & Data-Management

The Omniport 30 offers both continuous and single-point datalogging. The measurement values of up to three channels are stored simultaneously, together with a time and date stamp, in the internal memory of the device.

Stored measurement data, as well as the minimum, maximum, average and standard deviation values can be shown directly on the display. Scroll through a recorded measurement and switch between graphs by using the control cross.

Data management is easy and intuitive by using the free SmartGraph3 software to create graphs that contain measurement channels of interest for better data analysis. Data can be exported in .csv format and then imported into EXCEL for further processing.

Features

Data logging Internal memory for 2 million measured values 23 physical quantities Capacitive TFT touch screen Displays measurands simultaneously

Real-time HOLD / MIN / MAX / AVG readout Integrated air pressure sensor User friendly operation Free data management software

v1.5 / Modification rights reserved

OMNIPORT 30

Page 2

Technical Data

General

Power supply 4 x Alkaline LR6 AA batteries, 1.5 V (not in the scope of supply) Optional power supply 5V DC via USB (cable included)

Temperature range operating: handheld and handle of sensing probe: 0...50°C

storage: -20...60°C (-4...140°F)

Internal memory for approx. 2 million measured values

Housing / protection class ABS / IP40 Dimensions (HxWxD) 170 x 62 x 34 mm

(6.69 x 2.44 x 1.34”)

Weight ca. 205g (0.45 lbs)

Display TFT display, 54 x 41 mm (2.13 x 1.61”), illuminated

CE compatibility Hand-held: EN61000-6-2:2005 EN61000-6-3:2007 Logprobe: EN61326-1:2013 EN61326-2-3:2013

Integrated air pressure sensor

Measuring range 800 to 1100 mbar (complete accuracy) Accuracy max. ± 0.5 mbar (at 25 °C, 1013.25 mbar) Long term stability typ. -1 mbar/year

HUMIDITY / TEMPERATURE PROBES

LOGPROBE 20 - compact, pluggable HVAC probe

(1.7”)

Ø12

(0.47”)

(1.3”)

Working range: 0...100% RH / -40...80°C

Accuracy: ±2% RH (0...90% RH), ±3% RH (90...100% RH) @20°C / 68°F ±0.2°C

max. ±0.6°C /

/ ±0.36°F @20°C / 68°F

±1.08°F (-40...80°C / -40...176°F)

Order code: LOGPROBE20-HTPC

Response time τ

: ≤ 30 sec.

Filter: Membrane filter

Order code: LOGPROBE20-HTPA Response time τ

≤ 10 sec.

Filter: Plastic grid filter

(-40...176°F)

(32...122°F)

LOGPROBE 16 - HVAC probe

(2.8”)

∅12

(0.47”)

(1.3”)

LOGPROBE 31 - high temperature probe

(9.9”)

250

(0.5”)

∅12

LOGPROBE 30 - confined space probe

(9.9”)

250

∅5

(0.2”)

OMNIPORT 30

v1.5 / Modification rights reserved

Working range: 0...100% RH / -20...70°C (-4...158°F)

Accuracy: ±2% RH (0...90% RH), ±3% RH (90...100% RH) @20°C / 68°F ±0.2°C / ±0.36°F @20°C / 68°F max. ±0.5°C

Response time τ

: ≤ 7 sec.

/ ±0.9°F (-20...70°C / -4...158°F)

Order code: LOGPROBE16

Working range: 0...100% RH / -40...180°C (-40...356°F)

(1.3”)

(grip of sensing probe up to 50°C/122°F)

Accuracy: ±2% RH (0...90% RH), ±3% RH (90...100% RH) @20°C / 68°F ±0.2°C max. ±0.6°C

Response time τ

: ≤ 30 sec.

Temperature dependency: RH: ±0.03% RH/°C

/ ±0.36°F @20°C / 68°F

/ ±1.08°F (-40...180°C / -40...356°F)

(% RH/1.8°F)

Order code: LOGPROBE31

Working range: 0...100% RH / -40...100°C (-40...212°F)

Accuracy: ±2% RH (0...90% RH), ±3% RH (90...100% RH) @20°C / 68°F ±0.2°C

max. ±0.6°C Response time τ

: ≤ 15 sec.

Temperature dependency: RH: ±0.03% RH/°C

/ ±0.36°F @20°C / 68°F

/ ±1.08°F (-40...100°C / -40...212°F)

(% RH/1.8°F)

Order code: LOGPROBE30

Page 3

AIR VELOCITY PROBES

LOGPROBE 61/60 - stainless steel probe

(7.9”)

200

LOGPROBE 65 - polycarbonate probe

∅6

(0.2”)

(0.5”)

Working range: 0.08...2m/s (15...400ft/min) 0.2...20m/s (40...4000ft/min)

-20...70°C Accuracy: ± (0.04m/s ± 0.7°C

(-4...158°F) -20...70°C (-4...158°F)

/ 8ft/min+ 1% of m. v.) ± (0.2m/s / 39ft/min + 2% of m. v.)

/ ±1.26°F (0...50°C / 32...122°F) ± 0.7°C / ±1.26°F (0...50°C / 32...122°F)

Response time τ90: ≤ 1.5 sec. ≤ 1.5 sec.

Order code: LOGPROBE61 LOGPROBE60

200

(7.9”)

Working range: 0.2...20m/s (40...4000ft/min) / 0...50°C (32...122°F)

(0.7”)

Accuracy:

± (0.2m/s / 39ft/min + 3% of m.v.)

± 1°C

(0.5”)

∅12

Response time τ

Order code: LOGPROBE65

: ≤ 1.5 sec.

CO2 PROBE

LOGPROBE 802/805/810 - CO2 probe

(3.8”)

18.5

(0.7“)

Working range: 0...2000 / 5000 / 10000ppm Technology: dual wave NDIR with autocalibration

Accuracy

and 1013mbar 0...5000ppm: < ± (50ppm +3% of measured value)

(77°F and 14.69psi) 0...10000ppm: < ± (100ppm +5% of measured value)

at 25°C 0...2000ppm: < ± (50ppm +2% of measured value)

Warm-up time: 3 min.

Temperature dependency: typ. 1ppm CO Order code: 0...2000ppm LOGPROBE802

0...5000ppm LOGPROBE805

0...10000ppm LOGPROBE810

Carrying Case

The optional carrying case protects the handheld, probes and accessories during transport and storage. It helps to avoid mechanical damage, as well as the contamination of the sensors, which is essential for the optimal long term performance of the instrument.

/ ±1.8°F (0...50°C / 32...122°F)

/°C (-20...45°C) (-4...113°F)

Protective Cover

The optional cover protects the handheld device during usage in dirty or oily environments. The integrated magnetic plate allows an easy temporary fixing of the handheld onto a metallic surface on site, while the hang-on straps helps keep your hands free while taking measurements.

v1.5 / Modification rights reserved

HA040906

HA040907

OMNIPORT 30

Page 4

Ordering Guide

POSITION 1 BASIC DEVICE

POSITION 2 CABLE

POSITION 3 PROBES

Humidity / Temperature

Air Velocity

POSITION 4 CARRYING CASE

1) Directly connected to device, cable is optional

2) Cable is necessary

Order Example

2m (6.6ft) HA010813

LOGPROBE 20 - Response time ≤ 30 sec. LOGPROBE 20 - Response time ≤ 10 sec. LOGPROBE 16 - HVAC probe LOGPROBE 31 - high temperature probe LOGPROBE 30 - confined space probe

LOGPROBE 61 - stainless steel probe / 0.08...2m/s (15...400ft/min) LOGPROBE 60 - stainless steel probe / 0.2...20m/s (40...4000ft/min) LOGPROBE 65 - polycarbonate probe / 0.2...20m/s (40...4000ft/min)

LOGPROBE 802 - 0...2000ppm LOGPROBE 805 - 0...5000ppm LOGPROBE 810 - 0...10000ppm

For basic device and up to 4 probes HA040906 HA040906

Pluggable Probes 1)Remote Probes

OMNIPORT30 OMNIPORT30

LOGPROBE20-HTPC

LOGPROBE20-HTPA

LOGPROBE16

LOGPROBE31

LOGPROBE30

LOGPROBE61

LOGPROBE60

LOGPROBE65

LOGPROBE802

LOGPROBE805

LOGPROBE810

Pluggable Probes:

Position 1 - Basic Device OMNIPORT30

Position 2 - Probe LOGPROBE805

Position 3 - Carrying Case HA040906

Remote Probes:

Position 1 - Basic Device OMNIPORT30

Position 2 - Cable HA010813

Position 3 - Probes LOGPROBE16

LOGPROBE61

Position 4 - Carrying Case HA040906

Accessories

Carrying case for basic device, 2 pluggable and 2 remote probes HA040906

Protective cover HA040907

Membrane filter PC (for ∅12mm RH/T probes) HA010118 Metal grid filter PC (for ∅12mm RH/T probes) HA010119 Stainless steel sintered filter (for ∅12mm RH/T probe) HA010103

Plastic grid filter PC (for Logprobe 20-HTPA) HA010121

Cable for remote probes 2m

Humidity standards / Calibration device refer to data sheet Humidity Calibration Set

(6.6ft) HA010813

SmartGraph 3 - data management software free download at www.epluse.com/smartgraph3

OMNIPORT 30

v1.5 / Modification rights reserved