E+E EE35 Specifications

EE35

Industrial Transmitter for

Dew Point Measurement

Exact dew point monitoring is increasingly playing a more impor­tant role in many industrial applications, such as drying process­es, air pressure pipelines, etc. For these purposes the multifunc­tional EE35 Series offers the ideal features.

The EE35 Series is based on a functional, user-friendly housing
concept and on the proven polymer humidity sensors of the HC
Series.
A specially developed autocalibration process enables measure­ments in a measurement range of -60...60°C Td (-76...140°F Td), with
a Td measurement accuracy of ±2°C (±3.6°F).
Two freely configurable and scalable analogue
outputs are available for the two measurement values (Td, T).
An optional hygrostat output, which can be set by means of a potentiometer, provides an alarm signal in
a simple way when a threshold of the permitted dew point is exceeded.
An optional display for the measurement values and the associated MIN/MAX values allows a quick overview
of the current situation.

Autocalibration

Dew points in the range of -60...-20°C (-76...-4°F) at room temperatures correspond to relative humidity values
of 0.08...5.37% RH. The measurement of such low humidity values is not possible with conventional
capacitive measurement methods. For the EE35 Series, a special autocalibration process is used to compen­sate for the usual drift effects and thus to achieve high accuracy measurements also at -60°C Td

(-76°F Td).

Installation

In addition to the direct mounting of the dew point probe, a ball valve installation enables the mounting and
removal of the probe without having to interrupt the running process.

Alarm Output

An optional alarm module with one relay output is available for control and alarm purposes. The setting
of the Td threshold can be easily done with the potentiometer on the printed circuit board.

Integrated power supply

A power supply, integrated in the back module of the housing, can be ordered
optionally (100...240V AC, 50/60Hz; ordering code V01). The power supply V01 is
available for both polycarbonate and metal housing and comes standard with two
plugs for supply and outputs to allow an easy connection.

Typical Applications

Features

industrial processes
monitoring of air pressure pipelines
warehouses
drying processes
paper industries
chemical industries

104

measuring range -60...60°C Td (-76...140°F Td)

accuracy of measurement ±2°C Td (±3.6°F Td)

traceable calibration

alarm output for dew point

autocalibration

V2.7 / Modification rights reserved

EE35

Housing Dimensions (mm)

Installation Example

Housing:

polycarbonate housing metal housing

135 (5.3”)

163 (6.4”)

For use in harsh industrial environ­ments the EE35 series is available in a
robust metal housing.

90 (3.5”)

135 (5.3”)

66.5 (2.6”)

90 (3.5”)

Model:

32

∅13 (0.51”)

(1.3”)

code “probe length”

∅12 (0.47”)

code “cable length”

15 (0.59”)

EE35-xEx

Remote probe for T up to 60°C (140°F)
and pressure-tight up to 20bar (290psi)

Probe material: stainless steel

66.5 (2.6”)

ball valve installation

1/2” ISO or 1/2” NPT

1/2” ISO or 1/2” NPT

(pressure-tight up to

20bar/290psi)

bore diameter:
>13.1 (0.5”)

23 (1”)

64 (2.5”) resp. 164 (6.5”)

Connection Versions

Standard

2x M16x1.5

minimum installation depth

maximum installation depth

Plug Option C03

Lumberg

RKC 5/7

fixed installation

(pressure-tight up to 20bar/290psi)

1/2” ISO or 1/2” NPT

bore diameter:

(0.5”)

>13.1

Plug Option C06

Lumberg

RSC 5/7

M16x1.5

EE35

V2.7 / Modification rights reserved

Power supply +
Analogue output

105

Technical Data

80

60

40

20

0

-20

-40

-60

-80

0

10

20 30

40

50 60

limit of measuring range

uncertainty of measurement ±2 degC

Analog Ausgang /
analogue output

OUT 2

8

Versorgung /
supply

OUT 1

GND

GND

V+

V

mA

V

mA

7

6

5

4

3

2

1

8-35V DC
12-30V AC

Serielle Schnittstelle
für Konfiguration /
serial connection for
configuration

GND Ser

TxD/A+

RxD/B-

Measuring Quantities

Dew point

Humidity sensor HC1000-400
Measuring range standard calibration: -40...60°C
(below 0°C /
Accuracy ≤ ±2°C (≤ ± 3.6°F)
Traceable to intern. standards,

administrated by NIST, PTB, BEV...

32°F the transmitter outputs frostpoint) special calibration: -60...60°C (-76...140°F)

(-40...140°F)

Response time t

dew point temperature (°C)

90

80 sec. -20°C → -40°C (-4°F → -40°F)
10 sec. -40°C → -20°C (-40°F → -4°F)

Process temperature (°C)

Temperature

Sensor Pt1000 DIN A

Measuring range 0...60°C

Accuracy of temperature measurement at 20°C (68°F) ±0.2°C (±0.36°F)
Sensitivity error at full scale ±0.1°C (±0.18°F)
Temperature dependence of electronics < 0.005°C/°C

Outputs

Two freely selectable and scaleable analogue outputs 0 - 10V -1mA < I

0 - 5V -1mA < I

xx...yy°C T, Td/Tf / xx...yy°C respectively 4 - 20mA RL < 500 Ohm

0 - 20mA RL < 500 Ohm

General

Supply voltage 8...35V DC

12...30V AC (optional 100...240V AC, 50/60Hz)

Current consumption - voltage output typ. 40mA, with autocalibration: 100mA

- current output typ. 80mA, with autocalibration: 140mA

Pressure range 0...20bar

Housing / protection class PC or Al Si 9 Cu 3 / IP65;

Cable gland M16 x 1.5 (option: plug) cable Ø 4.5 - 10 mm (0.18 - 0.39”)

Electrical connection screw terminals up to max. 1.5mm² (AWG 16)

Sensor protection stainless steel sintered filter

Working temperature range probe: -40...60°C

electronic: -40...60°C

with LC display: -20...50°C (-4...122°F)

with alarm module: -40...60°C

Storage temperature range -40...60°C (-40...140°F)

Electromagnetic compatibility according to EN 61326-1 EN61326-2-3 ICES-003 ClassB

Industrial Environment FCC Part15 ClassB

(32...140°F)

(0...300psi)

< 1mA

L

< 1mA

L

Nema 4

(-40...140°F)
(-40...140°F)

(-40...140°F)

Technical Data for Options

Connection Diagram

Display graphical LC display (128x32 pixels), with integrated push-

buttons for selecting parameters Td or T and MIN/MAX functions

Alarm output for Td/Tf - range: -60...40°C Td

(-60...40°F Td)

adjustable with the

potentiometer

on the printed circuit board

- 1 switch contact

- 250V AC/6A or 28V DC/6A

Terminal configuration - Alarm output

106

serial connection for
configuration

analogue output

supply

REL 1

V2.7 / Modification rights reserved

NC

C

NO

11

12

13

EE35

Ordering Guide EE35

EE35-

Hardware Configuration

Housing metal housing M

Type pressure tight E
Cable length 1m

(incl. probe length)

Probe length 100mm

Pressure tight 1/2" male thread HA03
feedthrough 1/2” NPT thread HA07
Display without display

Alarm output

Plug cable glands

Probe fixed

Td-Calibration standard -40...60°C

Supply voltage 8...35V DC / 12...30V AC

1)

Software Configuration

Physical parametres temperature T [°C/°F] output 1 B
of the outputs dew point temperature Td [°C/°F] output 2 C

Type of 0-5V 2
output signals 0-10V 3

Measured value unit metric [°C]

Scaling of T-output -40...60 (T02) -60...20 (T65) -40...100 (T79) output T Select accorcding to

Scaling of Td/Tf-output -40...60 (T02) 0...60 (T07) -60...60 (T64) output Td resp.Tf Select accorcding to

1) Combination alarm output and plugs is not possible (with cable glands only) / combination alarm output and integrated power supply is not possible

2) Integrated power supply includes 2 plugs for power supply and outputs / further plug options are not possible

polycarbonate housing P

(3.3ft) 01

2m (6.6ft) 02

(16.4ft) 05

5m

(3.9”) 3
(7.9”) 5

200mm

with display D05
without relay
with relay SW

1 plug for power supply and outputs C03
1 cable thread / 1 plug for RS232 C06

pluggable P01

special calibration -60...60°C (-76...140°F) CA02

integrated power supply 100...240V AC, 50/60Hz

frost point temperature Tf [°C/°F] D

0-20mA 5
4-20mA 6

non metric [°F] E01

-50...50 (T27) -50...100 (T66) -40...140 (T83) ordering guide (Txx)

-80...20 (T63) -20...70 (T73) -60...120 (T97)

-60...60 (T64) 20...140 (T77)

-10...50 (T03) 0...80 (T21) 32...120 (T90) ordering guide

0...50 (T04) -40...80 (T22) 32...140 (T91) (Tdxx resp. Tfxx)

0...100 (T05) -20...80 (T24) 32...132 (T96)

(-40...140°F)

2)

Other T-scaling refer

to data sheet „„T-Scalings““

Other Td/Tf-scaling refer

to data sheet „„T-Scalings““

V01

Accessories

- Ball valve set 1/2” ISO (HA050101) - Interface cable for PCB („HA010304“)

- Ball valve set 1/2” NPT (HA050104) - Interface cable for plug C06 („HA010311“)

- Display + housing cover in metal („D05M“) - Bracket for installation onto mounting rails* („HA010203“)

- Display + housing cover in polycarbonate („D05P“) - Sealing element (HA050308)

- Stainless steel sintered filter („HA010103“)

*Note: Only for plastichousing, not for metalhousing

Order Example

EE35-ME025HA03D05P01/BC5-T02-Td02

Housing: metal housing Output 1: T
Type: pressure tight Output 2: Td
Cable length: 2m
Probe length: 200mm
Pressure tight feedthrough: 1/2" male thread Scaling of T-output: -40...60°C
Display: with display Scaling of Td-output: -40...60°C
Alarm output: without relay
Plug: cable glands
Sensing probe: pluggable
Td Calibration: standard
Supply voltage: 8...35V DC / 12...30V AC

EE35

V2.7 / Modification rights reserved

(6.6ft) Output signal: 0-20mA

(7.9”) Measured value unit: metric

107