E+E EE245 Specifications

Page 1
EE240 Series
Wireless Sensor for
Humidity / Temperature / CO
2
State of the art sensor technology, highest reliability of data transmission and the ease of system installation are the outstanding features of the wireless sensor series EE240.
Wireless Transmitter EE245
The elegant housing combines the measurement of temperature, humidity and CO cation. As a standard, batteries provide for the power supply. For more power demanding applications the device can be powered through an external adapter.
Wireless Transmitter EE244
The industrial housing can be equipped with up to three sensing probes to contact the interchangeable probes. An optional display is available to provide local indication. As a standard, batteries provide for the power supply. For more power demanding applications the device can be pow­ered through an external adapter.
Interchangeable Sensing probes
A modular structure and easy extendable assortment of sensing probes allow the usage in many applications. For many years, the proven sensor technology of E+E for the measurement values of humidity, tem­perature, and CO longtime stability. The standard interface and the stored calibration data of the sensing probe allow for any choice or combination of the available sensing probes offered. An adaptation or expansion of the number of sensing probes afterwards or an exchange for service purposes can be achieved in seconds – a must-have for uninterrupted data acquisition. For high temperature applications or installations in small spaces, the sensing probe can be connected with a sensor cable of up to 10 m
. An optional display is available to provide local indi-
2
guarantee precise measurements and the highest
2
(33 ft) in length.
EE245 Transmitter
EE244 Transmitter
Sensing Probes for EE244
Base Station EE242
The EE242 base station is the central component of a wireless network with up to 500 transmitters or up to 2000 measured parameters. With the base station and the integrated web server one can easily perform the setup of the entire wireless network. EE242 allows for easy remote access and diagnosis of the network. The measured data is available at the EE242 base station via Ethernet / Modbus TCP and RS485 / Modbus RTU. Four measured parameters can be selected to the analogue outputs (0 - 5 / 10 V or 4 - 20 mA). Measured data and status information are available also on the optional display.
Router Series EE244-R
The radio range is greatly depending on local circumstances. With the router series EE244-R obstacles can be bypassed or the transmission distance expanded.
228
EE242 Base Station
Router EE244-R
v2.0 / Modification rights reserved
EE240 Series
EE240 Series
Page 2
Typical Applications
Pharma and Food Industry Warehouses and Cooling Chambers Control Rooms HVAC Systems and Museums
Interchangeable Sensing Probes
Remote Probes up to 10 m
Battery Operating Life up to 1 Years
Ethernet and Webserver
Highest Transmission Reliability
The data transmission is based on the IEEE 802.15.4 protocol with a transmission frequency of 2.4 GHz, which can be used all over the world without any additional cost. A special identification address, checksums, handshakes, and bidirectional communication provide the highest transmission reliability. Typical radio ranges are 60 m
(197 ft) for indoor applications and 1000 m (3300 ft) in the open field. Greater radio ranges are easy
obtainable with routers. The self-configuring, scalable, and self-healing mesh network, even when a connection fails, is another component contributing to the improvement of the transmission reliability and security. The highest possible data security level is accomplished with a preset encryption key according to AES-128.
Parallel Operation
Parallel operation of several EE240 wireless networks (i.e. several base stations) is also possible. For this each transmitter and router may be within the transmission range of the routers and basis station of one network only.
Digital Bus Connection
For bus integration, Modbus is supported. Communication is implemented via Ethernet or RS485 interface.
Features
(33 ft)
Installation / Remote Access / Maintenance via Webserver
The integrated Webserver allows platform-independent installation, remote access and easy maintenance with any commercially available browser (Chrome, Internet Explorer, Firefox,...) on a computer without additional software.
Wireless Networks
Transmitter
(max. 500 pieces)
max. 10 transmitters each node
Router
(max. 60 pieces)
2)
1)
max. 10 radio signals each node
1) Radio ranges:
- up to 60m (197 ft) indoors
2) Radio ranges:
- up to 60m (197 ft) indoors
 -upto1000m(3300ft)inopeneld
EE240 Series
v2.0 / Modification rights reserved
Base Station
229
Page 3
Technical Data Transmitter EE244 & EE245
10 9 8 7 6 5 4 3 2 1
General
Transmission frequency 2.4 GHz Transmission system IEEE 802.15.4 Transmission power 6.3mW Radio range up to 60m Approval ETSI / FCC Part 15.247 / IC Electromagnetic compatibility EN61326-1 Industry FCC Part 15 Class A EN61326-2-3 Industry ICES-003 Class A
EE244 (Transmitter, Router)
Supply transmitter (EE244-A) battery 4x1.5V AA (not in the scope of supply) Battery lifetime > 1 year with a measuring data transmission every 5 min. (for T / %RH) External supply transmitter (EE244-B) 8...28V DC SELV, typ. I External supply router (EE244-R) 8...28V DC SELV, typ. I
Housing material polycarbonate (PC)
Protection class housing IP65 Temperature ranges working temperature range of probe: refer to respective data sheet of sensing probe working temperature range: -40...+50°C (with display: -20...+50°C / storage temperature range: -40...+50°C (with display: -20...+50°C / Max. number of sensing probes 3 (2 Max. number of measuring signals 6 (4
EE245 (Transmitter)
Power Supply battery 4x1.5V AA (not in the scope of supply) Battery lifetime > 1 year with a measuring data transmission every 5 min. (for T / %RH) Radio Range up to 60m Antenna internal External supply transmitter (EE245) DC 8-28V SELV / AC 12V (±20%)
Housing material polycarbonate (PC)
Protection class housing IP30 Temperature ranges working temperature range: 0...90%RH (non-condensing) / -5...+55°C storage temperature range: 0...90%RH (non-condensing) / -5...+55°C (23...131°F) Max. numbers of measuring values 3 (T / RH / CO Accuracy T: ± 0,3 °C (at 20 °C) / ± 0,4 °C (20...55 °C) Rh: ± 3 % (30...70 %) / ± 5 % (70...90 %) CO 5000ppm (± 50ppm +3 % of m.v.) Connection screw terminal 1,5mm²
*) with external power supply
**) for CO
an external power supply is recommended.
2
(197 ft) indoors, up to 1000m (3300 ft)inopeneld
= 20mA at 24V; max. IL = 35mA at 24V DC
L
= 20mA at 24V; max. IL = 35mA at 24V DC
L
*
)
*
) (T / RH / CO
(197 ft) indoors
2000ppm (± 50ppm +2 % of m.v.)
2:
**
)
2
**
)
2
(-40...122°F)
-4...122°F)
(-40...122°F)
-4...122°F)
(23...131°F)
Dimensions (mm/inch)
EE244-Ax3: EE244-Bx2:
110 (4.3“)
20 (0.9“)
90 (3.5“)
135 (5.3“)
depth: 50 (2“)
1) included in the scope of supply
230
socket / ELKA 4012 PG7
EE245
32
31
11,5
136
VCC
1)
v2.0 / Modification rights reserved
GND
85
power supply DC 8-28V SELV AC 12V (±20%)
EE240 Series
Page 4
Technical Data Base Station EE242
Supply voltage SELV 24V AC/DC ±20% Digital interface • Ethernet (Modbus TCP or JSON)
• RS485 (Modbus RTU / ASCII) Current consumption typ. I Analogue outputs 0-5V -0.5mA < I 0-10V -1mA < I 0-20mA / 4-20mA R Number of analogue outputs 4
= 150mA at 24V DC; max. IL = 180mA at 24V DC
L
L
< 500 Ohm
L
Accuracy of analogue outputs ±5mV resp. ±10µA Temperature dependence of analogue outputs
max. 0.1 resp. 1
Resolution of analogue outputs 0.7mV resp. 1.50µA Electrical connection screw terminals max. 2.5mm
mV °C
µA °C
2
Housing material polycarbonate (PC) Protection class housing IP20 Temperature ranges working temperature range: -30...+50°C storage temperature range: -30...+50°C
Dimensions (mm/inch) - Connection Diagram EE242
pluggable or remote antenna
108 (4.3“)
(antenna cable refer to Accessories)
11 (0.4“)
90 (3.5“)
5 (0.2“)
11 (0.4“)
62 (2.4“)
top-hat rail mounting
1 2 3 4 5 6 7 8
V+
NCNCNC
GND
_
+
24V AC/DC
SELV
< 0.5mA
L
< 1mA
(-22...122°F) (with display: -20...+50°C / -4...122°F)
(-22...122°F) (with display: -20...+50°C / -4...122°F)
9 10 11 12 13 14 15 16
B
GND
RS485
Modbus RTU
A
V/
mA
OUT1
GND
mA
OUT2
V/
GND
V/
mA
OUT3
GND
V/
mA
OUT4
GND
Overview of EE244 Sensing Probes
Humidity/Temperature Probes
0...100% RH ±2% RH (0...90% RH) EE07-PFT1 ±3% RH (90...100% RH)
-40...80°C (-40...176°F) ±0.1°C (±0.18°F) at 20°C (68°F)
0...100% RH ±2% RH (0...90% RH) EE07-MFT9 ±3% RH (90...100% RH)
-40...80°C (-40...176°F) ±0.1°C (±0.18°F) at 20°C (68°F)
0...95% RH ±3% RH (10...100% RH) EE03-FT9 at 21°C (69.8°F)
-40...85°C (-40...185°F) ±0.3°C (±0.54°F) at 20°C (68°F)
Temperature Probes
-40...80°C (-40...176°F) ±0.1°C (±0.18°F) at 20°C (68°F) EE07-PT1
-40...80°C
CO
Probes
2
0…2000ppm ±(50ppm+2% of m.v.) EE871-HR2000J2 0…5000ppm ±(50ppm+3% of m.v.) EE871-HR5000J2 0…10000ppm ±(100ppm+5% of m.v.) EE871-HR1J2
Measuring Range Accuracy Order Code
(-40...176°F) ±0.1°C (±0.18°F) at 20°C (68°F) EE07-MT
EE240 Series
v2.0 / Modification rights reserved
231
Page 5
Ordering Guide
BASE STATION EE242
Hardware Configuration
Frequency 2,4 GHz (transmission power 6,3 mW) A
Output signal
Display
Software Configuration
Physical parameters
of outputs
Unit
T-Scaling
Td-Scaling
CO
(Output T - °C or °F)
(Output Td - °C or °F)
-Scaling (in ppm)
2
TRANSMITTER EE245
Hardware Configuration
Type
(only for TC and FTC)
CO
2
Frequency 2,4 GHz (transmission power 6,3 mW) A
Display
Software Configuration
Unit
0-5 V 2 0-10 V 3 0-20 mA 5 4-20 mA 6 with D without -
relative humidity temperature dew point temperature CO
CO2 [ppm] (R) Output 4 A / B / C / R
2
RH [%] (A) Output 1 A / B / C / R
T [°C] (B) Output 2 A / B / C / R
Td [°C] (C) Output 3 A / B / C / R
metric / SI (°C) ­non metric / US (°F) E01
-40...60 (T02)
0...50 (T04)
-20...50 (T48)
further scalings on request
0...2.000 (C20)
0...10.000 (C22)
RH + T + CO
2
RH + T FTx T + CO
2
T xTx
0...2.000 ppm 2
0...5.000 ppm 5 without CO
measurement x
2
with D without -
metric / SI (°C) ­non metric / US (°F) E01
EE242-
Select Txx code
Select Tdxx code
Select Cxx code0...5.000 (C21)
EE245-
FTC
xTC
TRANSMITTER / ROUTER EE244
Hardware Configuration
Type
transmitter with external supply Router R
Frequency 2,4 GHz (transmission power 6,3 mW) A
1 1
transmitter A
Number of sensing probes
2 2 3 (not possible with type B - transmitter with external supply) 3
Display
with D without -
1) External power supply units not included in the scope of supply
1)
EE244-
SENSING PROBES FOR EE244
Humidity and Temperature
Temperature
CO
2
232
polycarbonate metal module polycarbonate metal
0...2000 ppm EE871-HR2000J2
0...5000 ppm EE871-HR5000J2
0...10000 ppm EE871-HR1J2
v2.0 / Modification rights reserved
EE07-PFT1
EE07-MFT9
EE03-FT9 EE07-PT1
EE07-MT
EE240 Series
B
Page 6
Accessories / Replacement Parts
Base Station:
- Antenna cable 2m (7ft) HA010330
- Crossover cable
(PC to base station) HA010333
- External power supply unit V03
Transmitter: EE244 EE245
- Probe cable for EE07 - HA0108xx ()
2m
(7ft) / 5m (16ft) / 10m (33ft)
- Connection cable for EE03, 2m (7ft) HA010328 ()
- Connection cable for EE03, 5m
- Antenna cable 2m
(7ft) HA010330 ()
- Bracket for rail installation HA010203 ()
- Reference probes HA010403 ()
- Duct mounting kit for EE07 HA010209 ()
- External power supply unit V03 () ()
(16ft) HA010329 ()
Order Examples
Position 1 - Base Station:
EE242-A3D/ABCR-T04-Td48-C20
Frequency: 2,4GHz Output signal: 0-10V Display: yes Outputs: RH, T, Td, CO
2
Unit: SI Scaling: T: 0...50; Td: -20...50
Position 1 - Base Station:
EE242-A3D/ABCR-T04-Td48-C20
Frequency: 2,4GHz Output signal: 0-10V Display: yes Outputs: RH, T, Td, CO
2
Unit: SI Scaling: T: 0...50; Td: -20...50
Position 2 - Transmitter / Router:
EE244-BA1D
Type: Industrial transmitter with external supply Frequency: 2,4GHz Probe: 1 Display: yes
Position 2 - Transmitter:
EE245-FTC5Ax
Type: Room transmitter for relative humidity, temperature and CO CO2: 0...5000ppm Frequency: 2,4GHz Display: without
Position 3 - Sensing Probes:
EE07-PFT1, EE07-MT
2
EE240 Series
v2.0 / Modification rights reserved
233
Loading...