E+E EE046 Specifications
EE046
Condensation Monitor
EE046 condensation monitor helps prevent condensation on
chilled beams and other critical cold spots and is appropriate
for mounting onto plane surfaces and on pipes with max.
50 mm (2”) diameter. It features the well-proven E+E HC105
SMD humidity sensor.
Condensation on a surface occurs when the relative humidity
(RH) of the air close to the surface reaches 100 % RH.
Because of very good thermal coupling with the surface,
EE046 measures directly the RH of the air at surface
temperature.
EE046
The relay output gives an early warning when approaching condensing conditions, before
condensation actually happens. It indicates also a power supply failure or a broken cable.
A status LED indicates normal operation, alarm or power supply failure.
The E+E proprietary coating protects the humidity sensor against dust and dirt.
Typical Applications Features
early detection of condensation danger
chilled beams
switching cabinets
climate control
compact design and easy mounting
fast response time
dust protection
LED status indication
Technical Data
Humidity sensor E+E HC105
Working range 10...100 % RH
Threshold at 20 °C
Hysteresis
Response time at change of the t
surface temperature
Response time at change of the t90 < 25 sec.
relative humidity
Electrical output potential free relay with changeover contact
Switching capability
Supply voltage (Class III)
Current consumption < 6 mA for 24 V DC supply
< 10 mA for 24 V AC supply
Relay status indication LED, red
Electrical connection 5-pole push-in terminal, max. 1.5 mm
Protection sensor / electronics E+E proprietary coating / varnish
Housing protection class IP40
Housing material Polycarbonate, UL94-V2 approved
Electromagnetic compatibility EN 61326-1 EN 61326-2-3
industrial environment
Temperature range operation 0...50 °C
storage -20...70 °C ( -4...158 °F)
Weight approx. 60 g
(68°F), 24 V AC/DC 90±3 % RH
Hysteresis
5 % RH
< 3 min.
90
max. 24 V AC/DC, 1A
24 V AC/DC ±20 %
90±3 % RH85±3 % RH
(32...122 °F)
2
(AWG 16)
30
v1.0 / Modification rights reserved
EE046
EE046
Dimensions (mm/inch) Installation
status LED
Pipe mount
thermal conductive film
max. Ø 50 (2“)
max. Ø 50 (2“)
Wall mount
33.5 (1.32“)
Ø4.5 (Ø 0.18“)
63.5 (2.5“)
23 (0.9“)
43 (1.69“)
53 (2.09“)
22 (0.87“)
thermal conductive film
Connection Diagram / Status Indication Relay Function
power supply
24 V AC/DC ±20 %
+
~
~
*
V+
-
GND
WET
COM
DRY
* Relay status for power on and RH < 90%.
The relay falls to “WET” for RH > 90% or power off.
RH (%)
V+ (V)
90
85
~
~
0
LED ON: no condensation danger
LED flashes: condensation danger
LED OFF: power supply off / failure
Ordering Guide
Condensation Monitor EE046
EE046
v1.0 / Modification rights reserved
24
0
Relays
WET
DRY
EE046
31
Loading...