EE 4GEE WiFi Quick Start Manual

Let’s get your device connected

Thank you for choosing 4GEE WiFi

Here’s a quick guide to get you up and running
and making the most of your new device straight
away.

If you’re a devil for the detail, then visit ee.co.uk/
help/phones-and-device where you will find more
information about your 4GEE WiFi.

1. Lift the flap and insert the Nano-SIM into the
slot with the gold contacts facing upwards.

For more help setting up,
visit http://ee.co.uk/simstart

2. Connect the reversible USB cable to charge
your 4GEE WiFi. Use of a 9V/1.67A or 9V/2A
charger is recommended.

4GEE WiFi supports Qualcomm Quick Charge

2.0. Using a compatible charger can halve the
time to power your unit.

Getting to know your 4GEE WiFi

3. Once charged, you’re ready to go. Press down
on the power button for a few seconds and
your 4GEE WiFi will turn on.

1$12

Charging up other devices

Use the full-size USB to power up other devices
like tablets and smartphones.

ON/OFF&

Battery level

Signal
strength

SMS

Network type

4G / 3G

Micro USB

USB

Battery level is shown on the button.

Note: Your 4GEE WiFi needs at least 25%
battery to charge smaller devices (like a
smartphone) and at least 50% to charge
larger devices like tablets.

0-25% 26-50% 51-75% 76-100%

0-25%

Note: EE logo will illuminate when the device
is powered on.

Use the included SIM tool to help fully insert
the Nano-SIM until it clicks into place.

QUICK
START

GUIDE

4GEE WiFi from EE

CJB1FJ0ALAAC

Getting online

1. Ensure your 4GEE WiFi is switched on and
connected to the network.

2. On the device you want to connect to the
internet, go to the network settings and
search for your Mobile Wi-Fi network name.
(See the Keep Me Card)

3. Click connect.

4. Enter the password found on your Keep Me
Card.

Forgotten your password?

If you forgot your password, just reset your device
and you will be back up
and running in no time.
Use a paperclip or blunt
pin to gently press the
reset button.

Not responding?

If the device becomes
unresponsive, long press
and hold the power button
for 10 seconds until the
device reboots.

You’ve got mail - reading your text
messages

When you see the little envelope icon it means
you’ve got a text.

We will send you texts from time to time with
software updates and information.

1. Make sure you’ve got a device connected to
your 4GEE WiFi - see ‘Getting Online’ for more
information.

2. Enter 192.168.1.1 into your internet browser –
little hint, it’s good to bookmark this for easier
access next time.

3. Enter your username and password, the default
ones are really simple, you can change these
later if you like.
Username: admin
Password: admin

4. You are now on your 4GEE WiFi home page.
Here you can click on the text message icon
to read your texts. You can also change your
settings such as password or device name.

Why not visit our help and support pages at
ee.co.uk/help where you’ll find all sorts of
information, from looking after your device to
managing your 4GEE WiFi account.