Edwards Signaling 92PLC Series Catalog Page

VISUAL SIGNALS

FEATURES

> Circuit designed for

programmable logic control

> Optically designed fresnel lens

> Cast base may be used as a

junction box

> Immune to shock and vibration

> Single and double flash models

AGENCY APPROVALS

> UL 1638 Listed

> cUL Listed

AdaptaBeacon

®

Light Duty Strobe

PLC Compatible

92PLC Series

The Edwards 92PLC AdaptaBeacon signals are general purpose

visual signaling appliances suitable for indoor or outdoor use. The

strobe is electrically isolated from leakage current to prevent false

flashes and has been designed for PLC applications. The unit also

installs easily without having to add drop resistors to the PLC out-

put card.

The unit features a corrosion resistant, heat flowed epoxy finish

base. Designed for indoor or outdoor installation. May be direct, 1/2"

(13mm) conduit, or box mounted on a 4" (102mm) octagon box. For

weatherproof installation, units must be mounted vertically with lens

facing up.

Edwards flashing lights are particularly effective in high noise level

areas, especially where ear protection must be worn and audible

signals may not be heard or may be misunderstood. They can ad-

vise personnel in manufacturing and process control areas when an

operation is starting or stopping.

D-04

3-40

© Copyright 2004 Edwards

TECHNICAL INFORMATION

5 5/8"

(221mm)

VISUAL SIGNALS

6 1/4"

(159mm)

1 7/8"

(48mm)

Lens Replacement Electrical Replacement Peak Strobe Tube

Cat. No. Type Color Lens Ratings Strobe Tube Candlepower Life*

92PLCR-N5 Single Red V93-LR 120V 50/60 Hz 92-LST 1,400,000
92PLCA-N5 Flash Amber V93-LA 0.1 Amps 1,400,000 cd**
92PLCB-N5 Blue V93-LB
92PLCG-N5 Green V93-LG
92PLCM-N5 Magenta V93-LM
92PLCC-N5 Clear V93-LC

92PLC-DFR-N5 Double Red V93-LR 120V 50/60 Hz 92-ST 800,000 3,000 hr.
92PLC-DFA-N5 Flash Amber V93-LA 0.1 Amps 800,000 cd**
92PLC-DFB-N5 Blue V93-LB
92PLC-DFG-N5 Green V93-LG
92PLC-DFM-N5 Magenta V93-LM
92PLC-DFC-N5 Clear V93-LC

*Calculated strobe tube life at operating power to 75% efficiency.

5,000 hr.

SIGNAL INPUT LOAD CHARACTERISTICS*

Operating Max. off state Continuous on Surge (inrush/duration)

Cat. No. Voltage leakage current (mA) Current (mA) Amps/milliseconds

92PLC( )-N5 120V AC 60 Hz 5 100 20/.075
92PLC-DF( )-N5 120V AC 60 Hz 5 100 20/.075

*This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

© Copyright 2004 Edwards

D-04

3-41