Edwards Signaling 7007B-N5 User Manual
7007B-N5 Audible/Visible Signal-Strobe
Installation Sheet
Installation
WARNINGS
• Electrocution hazard. A qualified electrician familiar with
National Electrical Code and local code requirements must
install this product. Failure to follow the safety precautions
in this installation sheet could result in product or property
damage, or severe personal injury or death.
• Electrocution hazard. To reduce the risk of shock, do not
remove the lens or tamper with the unit when the circuit is
energized. Do not connect AC power until the installation
is complete.
Description
The 7007B-N5 series of devices are UL Listed audible/visiblesignal-strobes for general purpose signaling applications.
Table 1: 7007B-N5 models
Models Lens color
7007BA-N5 Amber lens
7005BB-N5 Blue lens
7007BG-N5 Green lens
7007BR-N5 Red lens
Figure 1: Details of 7007B-N5
The 7007B-N5 (Figure 1) can be mounted on any single gang
2 × 4 in. (51 × 102 mm) electrical box, double gang 4 × 4 in.
(102 × 102 mm) electrical box, or standard 4 × 4 in. (102 × 102
mm) junction box with a plaster ring.
To install the 7007B-N5:
1. Install an appropriate electrical box using suitable
hardware.
2. Connect the wire leads as shown in Figure 2.
3. Mount the device to the electrical box. Secure it using two
screws (supplied).
4. Perform an operational test.
© 2013 UTC Fire & Security. All rights reserved. 1 / 2 P/N P-047550-1871 • REV 03 • REB 12FEB13
A
Wiring
See Figure 2 for wiring connections.
Figure 2: Wiring connections
Maintenance
WARNING: Electrocution hazard. To reduce the risk of shock,
do not remove lens or tamper with unit when the circuit is
energized. Disconnect power and allow five (5) minutes for
stored energy to dissipate before starting work or disassembly.
High energy could be stored in the strobe circuit once it is
energized.
Perform regularly scheduled testing at least twice a year or
more often as dictated by local authorities having jurisdiction.
Specifications
Operating voltage 120V 60 Hz
larm current 115 mA
Regulatory information
Manufacturer Edwards, A Division of UTC Fire & Security
North American
standards
Americas Corporation, Inc.
8985 Town Center Parkway, Bradenton, FL
34202, USA
UL 864
Contact information
For contact information, see www.edwardssignaling.com.
2 / 2 P/N P-047550-1871 • REV 03 • REB 12FEB13
Loading...