Edwards Signaling 48SIN Series Catalog Page

VISUAL SIGNALS

FEATURES

AdaptaBeacon® Steady­On Incandescent Light

PLC Compatible
NEMA Type 4X

48SIN Series

> Weatherproof

> 25W Halogen lamp in 120V AC

Model; 20W Halogen lamp in
24V AC and 24V DC Models

> Snap-on high impact

polycarbonate/ABS base

> Shatter resistant polycarbonate

lens

AGENCY APPROVALS

> UL 1638 Listed

> UL Listed NEMA Type 4X

enclosure

> cUL Listed

The Edwards 48SIN Series AdaptaBeacon steady-on lights are

designed to meet continuous visual signaling requirements. The

unique double fresnel lens has been optically engineered to

maximize brilliance. This is accomplished with a series of

complementing fresnels that cause the dome to “fill” when the light

is operating. Beam distance is also increased with fresnel lenses.

And, with no moving parts, the lights are immune to shock and

vibration. The incandescent lights are available in six colors: red,

amber, blue, green, magenta, and clear.

Designed for indoor or outdoor installation. The lights may be direct

or 1/2" (13mm) conduit mounted on any plane. However, vertical

installation ensures maximum beam width projection. For

weatherproof installations units must be mounted vertically with

dome up. Use Cat. No. GSK-KIT gasket kit for weatherproof surface

installation of AC models. May be corner mounted indoors using the

Cat. No. CBR, corner mount bracket, or wall mounted indoors using

the Cat. No. WBR, wall mount bracket. See AdaptaBeacon

Accessories, page 3-118.

Ideally suited for applications where a continuous steady-on

incandescent light signal is required or where ambient noise makes

audible signals difficult to hear. The 48SIN is used where multiple,

smaller, stand-alone visual signals are required. The gasketed

NEMA 4X enclosure ensures installation acceptability in most

industrial and commercial locations.

D-04

3-6

© Copyright 2004 Edwards

VISUAL SIGNALS

TECHNICAL INFORMATION

4 7/32"

Use Cat. No. GSK-KIT gasket kit

for weatherproof surface mount

installation on AC units

4 9/32"

(109mm)

Light Source Lens Replacement Lamp Electrical Replacement
Cat. No. Color Lens Ratings Ratings Lamp

48SINR-N5-25WH Red 96-LR 25 Watts 120V 50/60 Hz 50LMP-25WH
48SINA-N5-25WH Amber 96-LA 175 Lumens* 0.20 Amps o
48SINB-N5-25WH Blue 96-LB 2198 candlepower Industry Trade
48SING-N5-25WH Green 96-LG 20,000 hr.** No. 25T8DC
48SINM-N5-25WH Magenta 96-LM
48SINC-N5-25WH Clear 96-LC

48SINR-G5-20WH Red 96-LR 20 Watts 24V 50/60 Hz 50LMP-20WH
48SINA-G5-20WH Amber 96-LA 226 Lumens* .80 Amps or
48SINB-G5-20WH Blue 96-LB 2839 candlepower Industry Trade
48SING-G5-20WH Green 96-LG 20,000 hr.** No. 1692
48SINM-G5-20WH Magenta 96-LM
48SINC-G5-20WH Clear 96-LC

48SINR-E1 Red 96-LR 15 Watts 12V DC Industry Trade
48SINA-E1 Amber 96-LA 189 Lumens* 1.0 Amps No. 94
48SINB-E1 Blue 96-LB 2374 candlepower
48SING-E1 Green 96-LG 1,520 hr.**
48SINM-E1 Magenta 96-LM
48SINC-E1 Clear 96-LC

48SINR-G1-20WH Red 96-LR 20 Watts 24V DC 50LMP-20WH
48SINA-G1-20WH Amber 96-LA 226 Lumens* .80 Amps or
48SINB-G1-20WH Blue 96-LB 2839 candlepower Industry Trade
48SING-G1-20WH Green 96-LG 20,000 hr.** No. 1692
48SINM-G1-20WH Magenta 96-LM
48SINC-G1-20WH Clear 96-LC

*Bulb manufacturer's Lumen rating.
**Projected lamp life based on manufacturer's calculated lamp life at 65 fpm and 50% duty cycle.

(108mm)

1/2" (13 mm)

conduit hole

r

SIGNAL INPUT LOAD CHARACTERISTICS*

Cat. No. Voltage leakage current (mA) Current (mA) Amps/milliseconds

48SIN( )-G1-20WH 24V DC 25 800 .9/1
48SIN( )-N5-25WH 120V AC 60 Hz 25 200 .8/8

*This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

© Copyright 2004 Edwards

Operating Max. off state Continuous on Surge (inrush/duration)

D-04

3-7