Edwards Signaling 48FLED Series Catalog Page

VISUAL SIGNALS

FEATURES

AdaptaBeacon® LED
Flashing Light

PLC Compatible
NEMA Type 4X

48FLED Series

> Weatherproof

> Multiple LED cluster reflected

from double parabolic inner
reflector

> 120,000 hour light source life

> Immune to shock and vibration

> Snap-on high impact

polycarbonate/ABS base

> Shatter resistant polycarbonate

lens

AGENCY APPROVALS

> UL 1638 Listed

> UL Listed NEMA Type 4X

enclosure

> cUL Listed

D-04

The Edwards 48FLED Series AdaptaBeacon LED flashing lights

incorporate a unique double fresnel lens that has been optically

engineered to maximize brilliance. This is accomplished with a

series of complementing fresnels that cause the dome to “fill” when

the light is operating. Beam distance is also increased with fresnel

lenses. Light emitting diode lights are immune to shock and

vibration. The AdaptaBeacon LED clusters are internally oriented to

allow viewing when the unit is mounted either horizontally or

vertically. The lights are available in four colors: red, amber, blue

and green.

Designed for indoor or outdoor installation. May be direct, conduit,

or box mounted on a 4" (102mm) octagon box on any plane.

However, vertical installation ensures maximum beam width

projection. For weatherproof installations mount units vertically with

dome up. Use Cat. No. GSK-KIT gasket kit for weatherproof surface

installation of AC models. May be mounted indoors using the Cat.

No. CBR corner mount bracket, or Cat. No. WBR wall mount bracket.

See AdaptaBeacon Accessories, page 3-118.

Edwards long life flashing LED beacons are particularly effective in

high noise level areas, especially where ear protection must be

worn and a visual status indicator is required. They can advise

personnel in manufacturing and process areas when an operation is

starting or stopping. Often used to signal malfunctions in

equipment, such as assembly line jams. Can warn personnel that

they are entering a restricted area or an area of high danger. May

be used where a smaller light output is desired or where many

multiple smaller flashing lights are specified. The gasketed NEMA

Type 4X enclosure ensures installation acceptability in most

industrial and commercial locations.

3-4

© Copyright 2004 Edwards

TECHNICAL INFORMATION

VISUAL SIGNALS

Use Cat. No. GSK-KIT gasket kit

for weatherproof surface mount

installation on AC units

4 9/32"

(109mm)

Lens Replacement Electrical LED Lamp

Cat. No. Color Lens Ratings Ratings Life

48FLEDA-G1 Amber 96-LA 24V DC 38 lumens 120,000 hr
48FLEDB-G1 Blue 96-LB 0.065A 35 lumens
48FLEDG-G1 Green 96-LG 102 lumens
48FLEDR-G1 Red 96-LR 28 lumens

48FLEDA-N5 Amber 96-LA 120V 50/60 Hz 38 lumens 120,000 hr.
48FLEDB-N5 Blue 96-LB 0.025A 35 lumens
48FLEDG-N5 Green 96-LG 102 lumens
48FLEDR-N5 Red 96-LR 28 lumens

4 7/32"

(108mm)

1/2" (13 mm)

conduit hole

.

SIGNAL INPUT LOAD CHARACTERISTICS*

Operating Max. off state Continuous on Surge (inrush/duration)

Cat. No. Voltage leakage current (mA) Current (mA) Amps/milliseconds

48FLED( )-G1 24V DC 4 65 .07/1
48FLED( )-N5 120V AC 60 Hz 5 25 .09/8

*This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

© Copyright 2004 Edwards

D-04

3-5