Edwards Signaling 114ST Series Catalog Page

VISUAL SIGNALS

Compaxx® Series
Strobes

PLC Compatible
Type 4X

FEATURES

> Type 4X Enclosure

> Two Mounting Configurations -

Surface and Conduit

> 175,000 peak candela

> 12 inch (305mm) wire leads

> Black Impact Resistant

Polycarbonate ABS Blend Base

> Five Lens Colors

> Available in Quantity Packaging (6)

AGENCY APPROVALS

> UL 1638 Listed

> cUL Listed

> UL Listed Type 4X

114

The Edwards 114 Series Strobes are designed for applications in

industrial, commercial, and institutional applications where reliable

and distinctive visual indication is required. The 114 Series is ideal

for process control as well as vehicular applications such as tow

motors. The strobe units provide a bright visual indication by utiliz-

ing a linear strobe tube inside a shatter resistant polycarbonate

fresnel lens.

Suitable for indoor or outdoor installation. When mounted outdoors

the unit should be mounted with the lens facing up. Two mounting

configurations are available:

(†)

ST Series

• The 114S, a surface mount version that utilizes a mounting

gasket and locknut to provide a secure surface attachment and

seal

• The 114P, a pipe mount version for mounting on 1/2" (13mm)

NPT conduit.

SPECIFICATIONS

> Replaceable Linear Strobe Tube

Powered at 1.75 Joules

> 12 to 48 VDC, 120V AC or 240V AC

Operation

D-04

3-104

Edwards strobe lights are particularly effective in high noise areas

where ear protection must be worn and audible signals may not be

heard or understood. They can advise personnel in manufacturing,

process control and warehouse areas when an operation is starting

or stopping or a vehicle is moving. They are also often used to sig-

nal equipment malfunction and to warn personnel that they are en-

tering restricted areas.

† Insert "S" for surface mount, "P" for pipe mount

© Copyright 2004 Edwards

VISUAL SIGNALS

240

240

TECHNICAL INFORMATION

3 7/8"

Gasket (provided in the 114S

for surface mounting)

Internally threaded in the 114P
for 1/2" (13mm)pipe mounting

3 1/4"

(82.6mm)

Lens Replacement Strobe Peak Electrical

Cat. No. Co lor Lens Cat. No. Tube Candlepower Ratings Mounting

114SSTA-EK** Am

ber 104-LA 114-ST 175,000 24V DC Surface

114SSTB-EK** Blue 104-LB 1,500 hr* 0.350 Amps Surface
114SSTC-EK** Clear 104-LC Surface
114SSTG-EK** Green 104-LG Surface
114SSTR-EK** Red 104-LR Surface

114PSTA-EK** Amber 104-LA 114-ST 175,000 24V DC 1/2" NPT Pipe
114PSTB-EK** Blue 104-LB 1,500 hr* 0.350 Amps 1/2" NPT Pipe
114PSTC-EK** Clear 104-LC 1/2" NPT Pipe
114PSTG-EK** Green 104-LG 1/2" NPT Pipe
114PSTR-EK** Red 104-LR 1/2" NPT Pipe

114SSTA-N5** Amber 104-LA 114-ST 175,000 120V AC 50/60 Hz Surface
114SSTB-N5** Blue 104-LB 1,500 hr* 0.10 Amps Surface
114SSTC-N5** Clear 104-LC Surface
114SSTG-N5** Green 104-LG Surface
114SSTR-N5** Red 104-LR Surface

114PSTA-N5** Amber 104-LA 114-ST 175,000 120V AC 50/60 Hz 1/2" NPT Pipe
114PSTB-N5** Blue 104-LB 1,500 hr* 0.1 Amps 1/2" NPT Pipe
114PSTC-N5** Clear 104-LC 1/2" NPT Pipe
114PSTG-N5** Green 104-LG 1/2" NPT Pipe
114PSTR-N5** Red 104-LR 1/2" NPT Pipe

114SSTA-R5** Amber 104-LA 114-ST 175,000 120V AC 50/60 Hz Surface
114SSTB-R5** Blue 104-LB 1,500 hr* 0.10 Amps Surface
114SSTC-R5** Clear 104-LC Surface
114SSTG-R5** Green 104-LG Surface
114SSTR-R5** Red 104-LR Surface

114PSTA-R5** Amber 104-LA 114-ST 175,000 120V AC 50/60 Hz 1/2" NPT Pipe
114PSTB-R5** Blue 104-LB 1,500 hr* 0.1 Amps 1/2" NPT Pipe
114PSTC-R5** Clear 104-LC 1/2" NPT Pipe
114PSTG-R5** Green 104-LG 1/2" NPT Pipe
114PSTR-R5** Red 104-LR 1/2" NPT Pipe

*Calculated strobe tube life at operating power to 75% efficiency.
** For package quantities of 6 strobes add "-6" to the catalog number. e.g. 114SSTA-EK-6

(98.4mm)

Locknut - 1.3625" O.D. (provided
in the 114S for surface mounting)

SIGNAL INPUT LOAD CHARACTERISTICS***

Operating Max. off state Continuous on Surge (inrush/duration)

Cat. No. Voltage leakage current (mA) Current (mA) Amps/milliseconds

114-EK Series 24V DC 7 350 .45/.02

***This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

© Copyright 2004 Edwards

D-04

3-105