Edwards Signaling 113 Series Catalog Page
VISUAL SIGNALS
FEATURES
Machlight® Machine
Status Indicator
PLC Compatible
113 Series
> PLC Compatible
> 3 High Pre-Assembled Units
> Three lens colors: red, amber and
green
> Two Mounting Configurations:
Surface or Pipe
> Two Indication Options: Flashing
or Steady
> 8 Inch (203mm) Wire Leads
AGENCY APPROVALS
> UL 508 Listed
> cUL Listed
SPECIFICATIONS
> 24V AC/DC Model
> 120V AC Model
The Edwards Machlight Status Indicators are Pre-Assembled three
high stacklights designed to be used for machine and process
control multi-status indication. Lens colors are arranged in the
following top to bottom order: red, amber, and green. The Machlight
is available in 24V AC/DC and 120VAC. There are two basic
mounting models: surface and pipe mounting. The surface mount
unit is supplied complete with mounting hardware. The pipe mount
version is supplied complete with a 10" (254mm) mounting pole with
the hardware necessary to pole mount the light to a horizontal
surface. The pipe mount version is also supplied with a side mount
bracket that can be used to fix the light to the vertical side of a
machine or control cabinet.
The Machlight utilizes a diffusion fresnel lens for increased viewing
area while maintaining a small, 2" (52mm) lens diameter. Lenses
can be easily rearranged by removing the top retaining screw and
simply sliding the lens assemblies off of the stack.
Edwards Machlights are particularly effective in high noise areas
where ear protection must be worn and audible signals may not be
heard or understood. They can advise personnel in manufacturing
and process control areas when an operation is starting or stopping
or to signal an equipment malfunction.
D-04
3-102
© Copyright 2004 Edwards
TECHNICAL INFORMATION
Pendant Mount
(51mm)
10"
(254mm)
9 1/2"
(241mm)
2"
VISUAL SIGNALS
2"
(51mm)
10"
(254mm)
3 1/8"
(79mm)
Surface Mount
Catalog No. Lens Colors* Ratings Ratings Lamp Lamp Life Light Source Mounting
113SP-RGA-AQ Red, Amber, Green 24V AC/DC, 0.24A 5 Watts Industry 301 500 hours Steady Pipe
113SP-RGA-N5 Red, Amber, Green 120V AC, 0.062A 10 Watts 113LMP-10W** 1,000 hours Steady Pipe
113FP-RGA-AQ Red, Amber, Green 24V AC/DC, 0.24A 5 Watts Industry 301 500 hours Flashing Pipe
113FP-RGA-N5 Red, Amber, Green 120V AC, 0.062A 10 Watts 113LMP-10W** 1,000 hours Flashing Pipe
113SS-RGA-AQ Red, Amber, Green 24V AC/DC, 0.24A 5 Watts Industry 301 500 hours Steady Surface
113SS-RGA-N5 Red, Amber, Green 120V AC, 0.062A 10 Watts 113LMP-10W** 1,000 hours Steady Surface
113FS-RGA-AQ Red, Amber, Green 24V AC/DC, 0.24A 5 Watts Industry 301 500 hours Flashing Surface
113FS-RGA-N5 Red, Amber, Green 120V AC, 0.062A 10 Watts 113LMP-10W** 1,000 hours Flashing Surface
* Replacement Lens: Red - 113LR, Amber - 113-LA, Green - 113-LG, Blue is also available - 113-LB
**The 113LMP-10W contains (3) individual bulbs.
Electrical Lamp Replacement
SIGNAL INPUT LOAD CHARACTERISTICS*
Operating Max. off state Continuous on Surge (inrush/duration)
Cat. No. Voltage leakage current (mA) Current (mA) Amps/milliseconds
113SP-RGA-AQ 24V AC/DC 0.1 0.24 2.5/5
113SP-RGA-N5 120V AC 0.025 0.08 0.5/5
113FP-RGA-AQ 24V AC/DC 0.1 0.24 2.5/5
113FP-RGA-N5 120V AC 0.025 0.08 0.5/5
113SS-RGA-AQ 24V AC/DC 0.1 0.24 2.5/5
113SS-RGA-N5 120V AC 0.025 0.08 0.5/5
113FS-RGA-AQ 24V AC/DC 0.1 0.24 2.5/5
113FS-RGA-N5 120V AC 0.025 0.08 0.5/5
*This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.
D-04
© Copyright 2004 Edwards
3-103
Loading...