Edwards Signaling 111 Specifications
2. Mount the switch on the stationary frame of the machine and connect the electrical
General Specifications
wiring. When mounting the switch on an ungrounded machine, connect the ground
lead to one of the mounting screws.
3. Mount the actuator on the movable guard, door, or gate.
The interlock switch and actuator magnet should be mounted in only three
configurations for actuation:
Figure 2
Perpendicular
Actuation
Best Best
Door
Actuation Pivot Actuation
Good
Parallel Actuation
Enclosure ABS Plastic
Temperature Range -40°F to 180°F (-40°C to 80°C)
Environmental Hermetically Sealed Contact Switch
Sealed in Polyurethane
NEMA Rating 1, 2, 3, 4, 4X, 5, 6, 12
Protection Class IP 67
Response Time 1 msec
Life Cycles 100,000 Under Full Load;
22/2 Jacketed (J)/0.24" (0.62cm)
Up to 200,000,000 Under Dry Circuit
Lead Types/O.D. 18/2 or 18/3 Jacketed (J)/O.24" (0.62cm)
18/3 (K)/0.33" (0.84cm)
UL/CSA All Models
Three configurations are appropriate for interlock applications. The parallel
actuation can result in on/off/on signal if the actuator passes by the switch rather
than coming to rest in proximity to it. This is NOT a recommended configuration for
Wire Color Code
interlock applications.
Black COM
White N.O.
Red N.C.
File E 122942
Ordering/Electrical Specifications
PART NUMBER CONTACT1LOAD RATING SWITCHING VOLTAGE SWITCHING CURRENT CONTACT SENSE
111-3Y-06(J) N.C. 100VA/84W 120V@0.8A 28V@3.0A33.0A3@34V 3.0A3@28V 1.0 Ohms 0.7"(1.8cm) 1.2"(3.0cm) 6'(1.8m) 18/2
111-3Y-12(J) N.C. 100VA/84W 120V@0.8A 28V@3.0A33.0A3@34V 3.0A3@28V 1.0 Ohms 0.7"(1.8cm) 1.2"(3.0cm) 12'(3.6m) 18/2
111-4Y-06(K) SPDT 100VA/84W 120V@0.8A 28V@3.0A33.0A3@34V 3.0A3@28V 1.0 Ohms 0.7"(1.8cm) 1.2"(3.0cm) 6'(1.8cm) 18/3
111-4Y-12(J)(K) SPDT 100VA/84W 120V@0.8A 28V@3.0A33.0A3@34V 3.0A3@28V 1.0 Ohms 0.7"(1.8cm) 1.2"(3.0cm) 12'(3.6m) 18/3
111-5X-06(J)-G14N.O. 10VA/10W 120V@0.08A 20V@0.5A 0.5A@20V 0.5A@20V NA 0.7"(1.8cm) 1.7"(4.3cm) 6'(1.8m) 22/2
111*-6Y-05(J) N.O. 25VA/25W 120V@0.2A 120V@0.2A 0.7A@35V 1.0A@25V 0.2 Ohms 1.0"(2.5cm) 2.0"(5.1cm) 5'(1.5m) 22/2
111-6Y-06(J)(K) N.O. 25VA/25W 120V@0.2A 120V@0.2A 0.7A@35V 1.0A@25V 0.2 Ohms 1.0"(2.5cm) 2.0"(5.1cm) 6'(1.8m) 22/2
111-6Y-12(J)(K) N.O. 25VA/25W 120V@0.2A 120V@0.2A 0.7A@35V 1.0A@25V 0.2 Ohms 1.0"(2.5cm) 2.0"(5.1cm) 12'(3.6m) 22/2
111-7Y-06(J)(K) N.O. 100VA/84W 120V@0.8A 28V@3.0A33.0A3@34V 3.0A3@28V 1.0 Ohms 0.7"(1.8cm) 1.2"(3.0cm) 6'(1.8m) 18/2
111-17Y-06(J) N.O. 100VA/100W 250V@0.4A 250V@0.4A 3.0A@34V 3.0A@34V 0.5 Ohms 0.7"(1.8cm) 1.2"(3.0cm) 6'(1.8m) 18/2
111-7Y-12(J)(K) N.O. 100VA/84W 120V@0.8A 28V@3.0A33.0A3@34V 3.0A3@28V 1.0 Ohms 0.7"(1.8cm) 1.2"(3.0cm) 12'(3.6m) 18/2
111-Y Actuator Only Included with all switches unless otherwise noted.
Warning— Each electrical rating is an individual maximum and cannot be exceeded!
1
Configuration with actuator away from the switch
2
Proximity of ferrous materials usually reduces sense range — typically by 50%. The shape and type of material cause a wide diversity of effects.
Testing is required to determine actual sense range for specific applications.
3
Rated at 3.0A for 6,000 cycles only. Other ratings are at 100,000 cycles.
4 Special cable exit (not UL)
CONFIG. AC/DC MAXIMUM, AC/DC MAXIMUM, AC/DC RESISTANCE NOMINAL NOMINAL NOMINAL SIZE
2
BREAK RANGE LEAD LENGTH LEAD
LR89176
GE Security
Industrial
©2004 GE Security Industrial. GE Security Industrial reserves the right to change specifications without notice.
I-0400-0304 12517 Rev D
Loading...