Edwards Signaling 108 Series, 108-DN Series Catalog Page
VISUAL SIGNALS
FEATURES
> 120,000 hr. LED light sources
> PLC compatible
> DeviceNet models available
> 3 visual LED signals in one
compact housing
> Two stack capability for a fourth
visual signal
> Multi-tone base module option
Chameleon
®
Multi-Status Indicator
PLC Compatible, DeviceNet
108 & 108-DN Series
The Chameleon is designed to function as either a steady or
flashing visual signal. It is designed such that any or all three lights
can be activated by a PLC or contact closure. The first light
activated will illuminate either steady or flashing (set by an internal
jumper). If a second light is activated, the Chameleon cycles
between the two colors. A third activation causes the Chameleon to
cycle between all three colors: red, amber , and green or red, amber ,
and blue. One additional lens module and light source – strobe,
halogen, incandescent or LED – can be added for a fourth signal.
TM
> Mutliple LED clusters in red,
green and amber or red, blue and
amber
> Molded-in gasketed lens modules
for dust tight reliability
> Vibration resistant heavy duty
industrial design
> Mounting flange and 4", 10" and
15" mounting pipes available
AGENCY APPROVALS
> UL 1638 Listed
> NEMA Type 3R, Type 4X and IP65
Rated
> cUL Listed C22.2 No. 205
D-04
The 108-DN Series Multi-Status Indicator utilizes the same
DeviceNet interface as the 102 Series Triliptical Stac klight. It has
been tested by OD V A's authorized independent test lab and
complies with OD V A conf ormance test and software.
The 108I Series features a multi-tone base module that allows the
installer to select one of the following eight available tone options:
stutter beep, continuous, 3 pulse horn, rapid siren, hi/lo , fast whoop ,
yeow and beep. The selected tone can be operated as an additional
signal or used in conjunction with any of the visual signals. The
signal is rated at 85 dB at 5 feet (1.63m). The 108-DN f eatures the
same eight tones but allows all to be activated over the DeviceNet
network. The 108 is also a vailab le without tone capability in direct
surface and 2 inch (51mm) pipe mount bases.
3/4" (19mm) NPT conduit pipe mounting or surface mounting in
non-hazardous dust and weatherproof applications.
For indoor applications, ma y be v ertically mounted with lenses
facing up or down. For weatherproof installation, it is recommended
that the unit be conduit mounted vertically with lenses facing up.
3-94
© Copyright 2004 Edwards
VISUAL SIGNALS
TECHNICAL INFORMATION
1
/2"
(13mm)
1
53/8"
(137mm)
/2"
(13mm)
35/8"
(92mm)
11/4"
(32mm)
(76mm)
Cat. No. 108ID Series Cat. No. 108IP Series
3"
Part # 023001 Cap
(supplied with
base module)
Signal Base
(Cat. No.
102DMBS)
Gasket
73/4"
(197mm)
35/8"
(92mm)
41/8"
(105mm)
(76)mm
Cat. No. 108I Series &
Cat. No. 108-DN Series
LED Lumen
Cat. No. Mounting Colors* Voltage Current Ratings*
108I-RGA-N5 Pipe mount (w/tone module) Red,
Green, Amber 120V 50/60 Hz .115A** 120,90,307
108I-RGA-G1 Red, Green, Amber 24V DC .105A** 120,90,307
108I-RBA-N5 Red, Blue, Amber 120V 50/60 Hz .115A** 120,90,307
108I-RBA-G1 Red, Blue, Amber 24V DC .105A** 120,90,307
108IP-RGA-N5 Pipe mount (short base) Red, Green, Amber 120V 50/60 Hz .045A 120,90,307
108IP-RGA-G1 Red, Green, Amber 24V DC .055A 120,90,307
108IP-RBA-N5 Red, Blue, Amber 120V 50/60 Hz .045A 120,90,307
108IP-RBA-G1 Red, Blue, Amber 24V DC .055A 120,90,307
108ID-RGA-N5 Direct mount Red, Green, Amber 120V 50/60 Hz .045A 120,90,307
108ID-RGA-G1 Red, Green, Amber 24V DC .055A 120,90,307
108ID-RBA-N5 Red, Blue, Amber 120V 50/60 Hz .045A 120,90,307
108ID-RBA-G1 Red, Blue, Amber 24V DC .055A 120,90,307
108-DN-RGA-N5 Pipe mount (w/tone module) Red, Green, Amber 120V 50/60 Hz .115A** 120,90,307
108-DN-RGA-G1 DeviceNet interface Red, Green, Amber 24V DC .105A** 120,90,307
108-DN-RBA-N5 Red, Blue, Amber 120V 50/60 Hz .115A** 120,90,307
108-DN-RBA-G1 Red, Blue, Amber 24V DC .105A** 120,90,307
*Manufacturer's lumen ratings listed in same order as LED colors. LED light sources have a lamp life of 120,000 hours.
**Includes tone module
3"
Part # 023001 Cap
(supplied with
base module)
Signal Base
(Cat. No.
102TBS)
57/8"
(149mm)
1
/2"
(13mm)
35/8"
(92mm)
13/4"
(44mm)
3"
(76mm)
Part # 023001 Cap
(supplied with
base module)
Signal Base
(Cat. No.
102PMBS)
SIGNAL INPUT LOAD CHARACTERISTICS*
Light Source Operating Max. off state Continuous on Surge (inrush/duration)
Cat. No. Voltage leakage current (mA) Current (mA) Amps/milliseconds
108I-**-G1 24V DC 5 .105 0.24/0.2
108I-**-N5 120V AC 5 .115 0.35/0.2
108IP-**-G1 24V DC 5 .055 0.07/0.2
108IP-**-N5 120V AC 5 .045 0.10/8
108ID-**-G1 24V DC 5 .055 0.07/0.2
108ID-**-N5 120V AC 5 .045 0.10/8
*This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this
signal.
**Letters in this position signify the colors of the LED clusters: RGA - red, green and amber or RBA - red, blue and amber.
© Copyright 2004 Edwards
D-04
3-95
Loading...