Edwards Signaling 1085 Series Catalog Page

Screw Mount With Wire Leads

2.00"

5.08 cm

1.60"

4.06cm

0.25" c. bore x 0.3'' dp, 0.16'' dia.

0.64cm c. bore x 0.76cm dp, 0.64cm dia.

0.38"

0.97cm

0.38"

0.97cm

0.25"

0.64cm

0.03"

0.8cm

0.20"

0.51cm

1085 Series

Applications

• Convenient surface mounting

• Mounting screws included

General Specifications

Enclosure ABS Plastic
Temperature Range -40°F to 150°F (-40°C to 65°C)
Environmental Hermetically Sealed Reed Switch

NEMA Rating 1, 2, 3, 4, 4x, 5, 6, 12
Protection Class IP 67
Response Time 1 msec max.
Life Cycles

Lead Types/O.D. #22 wire / 0.05" (0.15cm)
Color Choices Natural(N), Mahogany(M), Grey(G)
UL/ULC Listed All Models

Encapsulated in Polyurethane

100,000 Under Full Load,
10,000,000 Under Dry Circuit

Magnet

Part No. 1081

(included)

Order Information Electrical Specifications

1

Part Number
Configuration (AC/DC) (AC/DC) (AC/DC) Resistance Nominal Length

Contact

1085-G, M, N N.O. 7.5W/VA 100V 0.5A 0.2 Ohms 0.6" (1.6cm) 1'

1085W-M, N N.

1086-N N.

1086W-M N.

1081-N Actuator Only

Warning— Each electrical rating is an individual maximum and cannot be exceeded!

1

Configuration with actuator away from the switch

2

Proximity of ferrous materials usually reduces sense range — typically by 50%. The shape and type of material cause a wide diversity of effects.

Testing is required to determine actual sense range for specific applications. As measured on a nonferrous surface.

Gap distances are nominal make distance ± 20%. Gap Specifications are for switch to make. Break distance is approximately 1.1 to 1.5 times make.

Load Rating Switching Voltage Switching Current Contact Sense Range2 Lead

O. 7.5W/VA 100V 0.5A 0.2 Ohms 1.5" (3.8cm) 1'

C. 3W/VA 30V 0.25A 0.2 Ohms 0.6" (1.6cm) 1'

C. 3W/VA 30V 0.25A 0.2 Ohms 1.5" (3.8cm) 1'

POSITION SENSORS

76