Edwards Signaling 104ST Series Catalog Page

VISUAL SIGNALS

FEATURES

AdaptaBeacon® Strobes

PLC Compatible
Type 4X

104ST Series

> NEMA Type 4X Enclosure

> Panel or conduit mounted

> 300,000 peak candela

> 18 inch wire leads

> Immune to shock and vibration

AGENCY APPROVALS

> UL 1638 Listed

> cUL Listed C22.2 No. 205

> CE Marked Low Voltage Directive

and EMC Directive

> UL Listed NEMA Type 4X

The Edwards 104ST Series AdaptaBeacon strobes are designed for

light duty applications in industrial, commercial and institutional

applications where short term intermittent visual signaling is

required. The strobe unit provides a bright indication utilizing special

optics within a shatter resistant polycarbonate lens mounted on a

polycarbonate/ABS blend base.

Suitable for indoor or outdoor installation. When mounted outdoors

lens should be mounted facing up. May be panel mounted using the

provided locknut or conduit mounted.

An integral double threaded (internal/external) mounting nipple

accommodates 3/4" (19mm) or 1/2" (13 mm) conduit mounting.

Edwards strobe lights are particularly effective in high noise areas

where ear protection must be worn and audible signals may not be

heard or understood. They can advise personnel in manufacturing

and process areas when an operation is starting or stopping.

Often used to signal malfunctions in equipment, such as assembly

line jams. Can warn personnel that they are entering a restricted

area or an area of high danger.

D-04

3-74

© Copyright 2004 Edwards

TECHNICAL INFORMATION

Gasket (provided for use

when direct panel mounting)

VISUAL SIGNALS

3 7/8"

(98.4mm)

Double threaded for

panel mounting or

1/2" (13mm)

conduit mounting

3 1/4"

(82.6mm)

Locknut - 1.3625" O.D.

(provided for use when direct

panel mounting)

Lens Replacement Strobe Peak Electrical Replacement

Cat. No. Color Lens Cat. No. Tube Candlepower Ratings Lamp Cat. No.

104STA-N5 Amber 104-LA 3,000 hr*

300,000 120V 50/60 Hz 91B-ST
104STB-N5 Blue 104-LB 0.12 Amps
104STC-N5 Clear 104-LC
104STG-N5 Green 104-LG
104STR-N5 Red 104-LR

*Calculated strobe tube life at operating power to 75% efficiency.

SIGNAL INPUT LOAD CHARACTERISTICS*

Operating Max. off state Continuous on Surge (inrush/duration)

Cat. No. Voltage leakage current (mA) Current (mA) Amps/milliseconds

104ST( )-N5 120V AC 25 120 2.1/1

*This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

© Copyright 2004 Edwards

D-04

3-75