Edwards & Co STA501 Instruction Manual

INSTRUCTION
MANUAL

CARRY COT

STA501

Keep for future reference.

READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP

FOR FUTURE REFERENCE.

Suitable from children 0 to 9 kg.

WARNINGS

ALWAYS FOLLOW THE MANUFACTURERS INSTRUCTIONS.
READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND
USE OF THIS CARRY COT.

WARNING!: TO AVOID

INJURY OR DEATH:

• DO NOT USE THE BASSINET ONCE THE CHILD CAN SIT UP

UNAIDED.

• THIS CARRY COT SHOULD ONLY BE PLACED ON A FIRM,

LEVEL, DRY SURFACE OR CLICKED SECURELY INTO AN
EDWARDS & CO STROLLER.

• THIS CARRY COT IS ONLY SUITABLE TO USE WITH EDWARDS

& CO M SERIES STROLLERS, SUCH AS THE OSCAR MX.

• THE MAXIMUM WEIGHT OF THE CHILD USING THIS CARRY

COT/BASSINET ATTACHMENT IS 9KG.

• IT IS UNSAFE TO USE ACCESSORIES OR MATTRESSES NOT

APPROVED FOR USE WITH THIS CARRY COT.

• DO NOT PLACE ANY TOYS OR OBSTRUCTIONS IN THE CARRY

COT.

• WHEN USING INSIDE, ALWAYS HAVE THE CANOPY OPEN AND

COVER OFF, WITH UNDERNEATH VENT HOLES OPEN.

• This product is only suitable for a child who cannot sit up unaided

• Only use on a firm, horizontal level and dry surface.

• Do not let other children play unattended near the carry cot

• Do not use if any part of the carry cot is broken, torn or missing.

• Keep away from fire and extreme heat. Do not store in areas that may
get particularly hot in summer like roof space or beside shed walls.

• Do not permit other children to play unsupervised next to the carry cot.

• Regularly examine the handle and under side of the carry cot for signs of
wear.

• Make sure children are clear of any moving parts when adjusting the Carry
Cot otherwise they may be injured.

• This Carry Cot is suitable for one child only. Do not carry extra children or
bags in the carry cot. Do not place heavy weights on the handle.

• When installing the Carry Cot in the stroller, ensure the parking brake is
engaged at all times.

• The head of the child in the Carry Cot should never be lower than the
body of the child.

• Do not add another mattress on top of the mattress provided.

ASSEMBLY

1. Remove the mattress and unzip the lining inside the cot.

2. Locate the two bars on top of the base inside the cot. Pull
one of the bars into the housing as pictured.

3. Pull the second bar into it’s housing.

4. The cot should have rigid sides as pictured

5. Zip back the lining.

6. Place the mattress inside the cot.

7. Raise the canopy by simultaneously pressing the buttons on
the side and lifting upwards.

8. Place the cover on the cot.