EDUP EP-MS1532 Wi-fi Connection Manual
REV. May 2018
CONNECTION GUIDE
WI-FI
All Steps of Connecting
From PC to the LED Sign Display
NOTICE: BEFORE PERMANENTLY INSTALLING THE SIGN,
it is recommended that the wireless connection is tested,
and a test message be sent.
Please check the contents of your Accessories box
and Verify that you have the following :
PARTS CHECK LIST
EP-MS1532
USB Wireless Antenna (Bunny Ears)
Plugs into your PC
*
OR
Wireless Antenna
LAN Wireless Antenna (TP-ACCESS)
Plugs into your PC
*
Wireless Antenna
w/ Mounting Bracket
Wireless Access Point (TP-ACCESS)
Plugs into your SIGN
*
CAT-5 NETWORK CABLE WITH
WEATHER-PROOF PLUGS
* Plugs into the Wireless Antenna
and the SIGN
OR
<Box Check List>
2 l WI-FI CONNECTION GUIDE
Face to Face Setup
(For Mounting Type Antenna)
Step 1.
Attach Bracket to Pole or Wall and
Position Antenna towards Broadcasting
Antenna at Building.
(EP-MS1532 or other Wireless Antenna)
DO NOT DRILL Into SIgn Cabinet
Wall or Pole
* Note: Wireless Antennas Broadcast Directionally.
0% Sync
100% Sync
0% Sync
WI-FI CONNECTION GUIDE l 3
X
X
Loading...