COMM BOX PTY LTD | abn: 431 583 817 05 | Telephone +61 2 9938 4811 | Fax: +61 2 9905 6153
PO Box W105, Warringah Mall, NSW 2100 Australia | www.commbox.com.au
AUSTRALIA, CHINA, MALAYSIA, SINGAPORE, KOREA, SOUTH AFRICA
Introduction
CommBox Micro was introduced to answer the need for a small, economical but still
very capable Programmable Media Controller, particularly for use with Home Theatre
and also for applications where there is no audio or video requirement. In fact, it can
function in a similar way to PLCs if desired.
CommBox Micro is simply the programmable controller section of a CommBox
Classic unit.
It has all the same capabilities without the inbuilt audio and video systems.
It has no front panel controls, but there is a socket for connecting an optional
diagnostic control panel.
For system integrators already familiar with CommBox Processors, this manual
covers the points of difference and presents some typical applications - it is not
intended to be complete in itself but, for programming purposes, to be used in
conjunction with MAN0008.
This manual will concentrate on
Choosing your ancillary equipment
Connecting this equipment for control purposes
Guiding you through the process of changing a standard Theatre Commander
template to suit CommBox Micro in a typical home theatre environment.
For detailed information on the many advanced capabilities of CommBox Micro,
other Command Systems products that form part of the system and the software tools
that tie it all together, see MAN0008.
Thank you for purchasing a Command Systems product! We know you’ll be pleased
with it!
The CommBox team,
Command Systems Pty. Ltd.
Brookvale, NSW, Australia.