Edsal 7001, 7005 Assembly Instructions Manual

(A) Right Hand Back

(B) Left Hand Back

Quick Assemble Storage Cabinets

(L) Kick Plate

(N) Anchor Hardware

(C) Right Hand Side

(D) Left Hand Side

(I) Right Hand Door

(J) Left Hand Door

MODEL NUMBER (s)

7000 - RTA7000- 7000KA

7001– RTA7001- 7001K A -

7005 - RTA7005 - 7005KA

Page 1

(M) Handle

(K) Door Rods

(H) Shelf Clips

(E) Top

Safety Instructions

Safety Instructions

Safety Instructions

(F) Bottom

(G) Shelves

Required Tools

Required Tools

Required Tools

- Rubber Mallet

- Small Blade Screwdriver

- Small Philips Screwdriver

(handle assembly)

Use Caution when handling and assembling metal parts. The metal may have sharp edges or corners. The
use of protective gloves is recommended. This unit should be securely anchored to a wall with suitable fas­teners. Do not use this unit for anything that is outside the designed function of storage. Do not store loose
or heavy items on the top shelves or on the top of the unit, for they create a falling hazard that can injure
yourself or others. Always remember to use proper lifting techniques when moving either the boxed or as­sembled unit.

General instructions

General instructions

General instructions

It is recommended that the cabinets are assembled by more than one person. The use of a raised flat surface dur­ing assembly is highly recommended. During shipping and handling, some of the tabs that are used for assembly
may have closed together. Use a flat tipped screwdriver to either pry up or push from behind the tab to re-open.
Make sure that the unit is placed on a level surface, as this may effect the performance of the unit.

Part List & Product Specification : Edsal 7000 Series Quick Assemble Storage Cabinets (patent pending)

Part List & Product Specification : Edsal 7000 Series Quick Assemble Storage Cabinets (patent pending)

Part List & Product Specification : Edsal 7000 Series Quick Assemble Storage Cabinets (patent pending)

Reference

Reference

Reference

A
B
C
D
E
F
G
H

J
K
L
M
N

Description

Description

Description

Right Hand Back

Left Hand Back

Right Hand Side

Left Hand Side

Bottom

Shelves

Shelf Clips

I

Right Hand Door

Left Hand Door

Door Rods

Kick Plate

Handle

Anchor Hardware

Top

7000

-

4 Shelf

–

7000

7000

1
1
1
1
1
1
4
8
1
1
2
1
1
2

72”h x 18”d x 36”w

-

4 Shelf

–

72”h x 18”d x 36”w

-

4 Shelf

–

72”h x 18”d x 36”w

CBBK7218R KA
CBBK7218L KA
CBSD7222R KA
CBSD7222L KA

CBTO3922 KA
CBBO3718 KA

CCSH3719

7000CLP
CBDO6718R KA
CBDO6718L KA

CCDR3325 KA
CBKP3606 KA

201L

TB2

7001

-

2 Shelf

–

7001

-

7001

-

1
1
1
1
1
1
2
4
1
1
2
1
1
2

42”h x 18”d x 36”w

2 Shelf

–

42”h x 18”d x 36”w

2 Shelf

–

42”h x 18”d x 36”w

CBBK4218R KA
CBBK4218L KA
CBSD4222R KA
CBSD4222L KA

CBTO3922 KA
CBBO3718 KA

CCSH3719

7000CLP
CBDO3718R KA
CBDO3718L KA

CCDR1825 KA
CBKP3606 KA

201L

TB2

7005

7005

7005

1
1
1
1
1
1
4
8
1
1
2
1
1
2

-

4 Shelf

–

72”h x 24”d x 36”w

-

4 Shelf

–

72”h x 24”d x 36”w

-

4 Shelf

–

72”h x 24”d x 36”w

CBBK7218R KA

CBBK72188L KA

CBSD7228R KA
CBSD7228L KA

CBTO3928 KA
CBBO3724 KA

CCSH3725

7000CLP
CBDO6718R KA
CBDO6718L KA

CCDR3325 KA
CBKP3606 KA

201L

TB2

Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel free to contact our Edsal

manufacturing facility at, [phone] and reques t customer service. W e can also be reached on the internet at t he following e mail

To obtain replacement part s, please provide the fol lowing information :

- Model # - Part # & Description - Location Purchased - Date Purchased

address : customers [e-mail].

Consumer Products Division
Edsal Manufacturing Company

4400 South Packers Avenue
Chicago, IL 60609
www.edsal.com
Made In China

Assembly Instructions : Edsal 7000 Series Quick Assemble Storage Cabinets Page 2

Assembly Instructions : Edsal 7000 Series Quick Assemble Storage Cabinets Page 2

Assembly Instructions : Edsal 7000 Series Quick Assemble Storage Cabinets Page 2

Important Please Read First

Important Please Read First

Important Please Read First

This instruction sheet was designed to help you assemble this unit in the proper way, please follow them using all
parts and fasteners provided. Any alteration or deviation from this instruction sheet can result in unit failure. If
you have any assembly problems or questions, please feel free to contact our Edsal manufacturing facility at
[phone] during the hours of 9:00 a.m. to 5:00 p.m. central standard time and ask for customer service.
We have people available to assist you if need be with any part of this assembly process.

IT IS HIGHLY RECOMMENDED TO ASSEMBLE THIS UNIT AT EYE LEVEL, AND WITH THE HELP OF AN
ADDITIONAL PERSON. Using a RAISED surface such as a TABLE or DESK, will greatly EASE the ASSEMBLY
PROCESS. Assembly attempted on a much lower surface such as the floor, is still possible but does make the

assembly process longer and harder. During the shipping and handling of this product, some of the panels may
have a MINOR bend such as on a corner, door hinge pin, or a tab. This minor variation can be REPAIRED SIM-
PLY by using a SMALL TOOL or your HAND to move the material back to its designed form. A example will be
outlined in the “GETTING STARTED” section listed below. Some of the materials used in the packaging to pro­tect the parts from damage may leave dust or smudges on the steel panels. It is RECOMMENDED AFTER AS-
SEMBLY IS COMPLETE to use a MILD SOAP and WATER with a SOFT CLOTH to wipe the unit clean, and
use the SUPPLIED OR SUITABLE FASTENERS to PROPERLY SECURE this unit to a WALL.

Getting Started

Getting Started

Getting Started

The assembly process uses tabs, notches, rectangular, and square holes to hold the parts together. To
speed the assembly process, have a rubber mallet, small blade screwdriver, and a small phillips screwdriver
ready. After unpacking all the panels, visually inspect the corners. These are the most susceptible to dam­age through the shipping and handling process. If you find a corner bent out of place, use your hand and
gently move the corner back to the designed shape. Also during shipping and handling some of the tabs
used for engaging the panels together may have become closed. Visually inspect all panels and if found that
some are closed, use a small blade screwdriver to push the tabs from behind to open slightly (it is recom­mend to push tabs out slightly for ease of assembly, and then tap back down with a rubber mallet, to tighten
engagement). A example of pushing the tabs out and how the engagement process works, is shown below.

Push tab slightly
from back side
to open

Piece with tab
goes under piece
with rectangular

Small blade
screwdriver

hole

Step 1 - Back Assembly

Place the left and right hand backs on a level surface.
Position the parts so that all the tabs are facing up.
Place the part with the rectangular holes (left hand back)
over the part with the tabs (right hand back). Making
sure the tabs ride into the rectangular holes, slide the
backs together. Check to make certain that all the tabs
and rectangular holes have engaged completely, then
tap the tabs down for a tight engagement (see figure 1
for references).

Slide part

Tap tab with rubber
mallet to tighten
engagement

Slide part

Figure 1– Back Assembly

Tab fully engaged