Page 1
MP080 USER'S MANUAL
INTEL TRITON TX MOTHERBOARD
Foreword
========
This manual is designed to provide the basic necessary information for the
end user to understand and properly use the MP080 mainboard. The mainboard
ensures superlative performance and complete compatibilty with industry
standards, which incorporating many techincal enhancements.
Trademarks
==========
WTC is a registered trademark of Win Technologies Co., Ltd, All trademarks
belong to their registered owner.
Checklist
=========
Your MP080 package contains the following:
* MP080 mainboard
* User's manual
* HDD/FDD Cable
* Coml, Com2 and PS/2 mouse Cable
* Printer Cable
Precautions
===========
Make sure you ground yourself before handling the mainboard or other system
components. Electrostatic discharge will damage the mainboard. Note that you
must take special precaution when handling the mainboard in dry or airconditioned environments.
The precaution below is to protect the mainboard from electrostatic
discharge.
* Do not remove the anti-static packaging until you are ready to install the
mainboard and other system components.
* Ground yourself before removing any system component from its protective
anti-static packaging. To ground yourself, grasp the expansion slot covers
or other unpainted portion computer chassis.
* Frequently ground yourself while working, or use a grounding strap.
* Handle the mainboard by the edges and avoid touching its components.
Motherboard Features
====================
* Intel 82430TX PCI chipset: 82439TX(MTXC)/ 82371AB(PIIX4)
* Supports Intel P54C/P55C(MMX), Cyrix/lBM 6x86, and AMD KS/K6(MMX)
microprocessors
* Four high performance 32 bits PCI local bus master
* Four 16 bits ISA system bus I/O slots
* 256K/512K synchronous cache onboard
* Main xnemory (DRAM) from 4MB to 256MB, either Fast Page mode / EDO
mode/SDRAM
* Supports Four SIMha and Two DIMM sockets
* Supports two USB (Universal Serial Bus ) ports
* Enchanced IDE onboard( Ultra DMA-33)
* IR port optional
* Supports Windows 95 PnP ( Plug and Play) function and PC97 for I/O
* Enhanced fast I/O ( Serial port, Parallel port (ECP/EPP/SPP), FDC) onboard
* Supports ACPI function
Jumpers, DIP Switch and Connectors Reference
============================================
Page 2
Before installing the mainboard, make sure that the jumper settings are
properly set for your configuration. The functions of the different jumpers
are respectively as follows:
CPU Clock Selector JP7, JP8, JP9
CPU /BUS Clock Ratio Selector SW1-6,SW1-7,SW1-8
CPU Voltage Selector SW1-1 · 2 · 3 · 4 · 5
Single,Dual Voltage Selector JP15
Flash RORI Voltage Selector JP12
CMOS Charge /Discharge JP3
Mainboard Connectors:
Hard disk Connector IDE 1&IDE2
Printer Connector PRN 1
Floppy Corlnector FDC 1
Serial Connector COMI & COM2
Universal Serial Bus Connector USB
SMI Push Button Connector J7
SMI LED Connector J1
Hard disk LED Connector J3
Keylock and Power LED Connector J6
Speaker Connector J4
Reset Connector J2
Keyboard Connector KB 1
PS/2 Mouse MS 1
Power Supply Connector P1
Jumper Caps reference :
Red cap for voltage selector
Yellow cap for Clock Selector
Black cap for others
CPU Jumper Setting
==================
Before installing the CPU, make sure that the CPU VOLTAGE SELECTOR are set
properly, wrong voltage setting will damage the CPU and mainboard.
SINGLE VOLTAGE CPU: JP15 ALL OPEN
DUAL VOLTAGE CPU: JP15 ALL CLOSE
CPU CORE VOLTAGE REFERENCE
-------------------------SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 VRE
ON ON ON ON OFF 3.5V
OFF ON ON ON OFF 3.4V
ON OFF ON ON OFF 3.3V
OFF OFF ON ON OFF 3.2V
ON OFF OFF ON OFF 2.9V
OFF OFF OFF ON OFF 2.8V
ON OFF OFF OFF OFF 2.1V
CLOCK SETTING REFERENCE
----------------------JP7 JP8 JP9 FREQUENCE
1-2 1-2 1-2 50 MHz
2-3 1-2 1-2 55 MHz
1-2 2-3 1-2 60 MHz
1-2 1-2 2-3 66 MHz
2-3 2-3 1-2 75 MHz
2-3 1-2 2-3 83 MHz
CLOCK RATIO SELECT REFERENCE
---------------------------SW6 SW7 SW8 P54C P55C
ON ON OFF x2.5 x2.5 (Clock Ratio)
OFF ON OFF x3 x3
ON OFF OFF x2 x2
OFF OFF OFF x1.5 x1.5
Page 3
Intel CPU (Single Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
PP-75 / 3.52V OPEN 1-2 1-2 1-2 1 1 1 1 0 0 0 0
PP-90 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 0 0 0
PP-100 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 0 0 0
PP-120 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 1 0 0
PP-133 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 1 0 0
PP-150 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 1 1 0
PP-166 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 1 1 0
P54CT-180 / 3.38V OPEN 1-2 2-3 1-2 0 1 1 1 0 0 1 0
P54CT-180 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 0 1 0
P54CT-200 / 3.38V OPEN 1-2 1-2 2-3 0 1 1 1 0 0 1 0
P54CT-200 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 0 1 0
Note: JP15: ALL OPEN
SW1 : 1-ON, 0-OFF
Intel CPU (Dual Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
P55C-150 / 2.8V CLOSE 1-2 2-3 1-2 0 0 0 1 0 1 1 0
P55C-166 / 2.8V CLOSE 1-2 1-2 2-3 0 0 0 1 0 1 1 0
P55C-200 / 2.8V CLOSE 1-2 1-2 2-3 0 0 0 1 0 0 1 0
P55C-233 / 2.8V CLOSE 1-2 1-2 2-3 0 0 0 1 0 0 0 0
P55C-266 / 2.8V CLOSE 1-2 1-2 2-3 0 0 0 1 0 1 0 1
Note: JP15: ALL CLOSE
SW1 : 1-ON, 0-OFF
AMD K5 CPU (Single Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
K5PR-75 / 3.52V OPEN 1-2 1-2 1-2 1 1 1 1 0 0 0 0
K5PR-90 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 0 0 0
K5PR-100 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 0 0 0
K5PR-120 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 0 0 0
K5PR-133 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 0 0 0
K5PR-150 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 1 1 0
K5PR-166 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 1 1 0
K5PR-200 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 0 1 0
Note: JP15: ALL OPEN
SW1 : 1-ON, 0-OFF
AMD K6 CPU (Dual Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
K6-166 / 2.9V CLOSE 1-2 1-2 2-3 1 0 0 1 0 1 1 0
K6-200 / 2.9V CLOSE 1-2 1-2 2-3 1 0 0 1 0 0 1 0
K6-233 / 3.2V CLOSE 1-2 1-2 2-3 0 0 1 1 0 0 0 0
K6-266 / 3.2V CLOSE 1-2 1-2 2-3 0 0 1 1 0 1 0 1
K6-233 / 2.1V CLOSE 1-2 1-2 2-3 1 0 0 0 0 0 0 0
K6-266 / 2.1V CLOSE 1-2 1-2 2-3 1 0 0 0 0 1 0 1
K6-300 / 2.1V CLOSE 1-2 1-2 2-3 1 0 0 0 0 1 1 1
Note: JP15: ALL CLOSE
SW1 : 1-ON, 0-OFF
IBM/CYRIX CPU (SINGLE Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
PR-120 / 3.52V OPEN 1-2 1-2 1-2 1 1 1 1 0 1 0 0
PR-133 / 3.52V OPEN 2-3 1-2 1-2 1 1 1 1 0 1 0 0
PR-150 / 3.52V OPEN 1-2 2-3 1-2 1 1 1 1 0 1 0 0
Page 4
PR-166 / 3.52V OPEN 1-2 1-2 2-3 1 1 1 1 0 1 0 0
PR-200 / 3.52V OPEN 2-3 2-3 1-2 1 1 1 1 0 1 0 0
Note: JP15: ALL OPEN
SW1 : 1-ON, 0-OFF
IBM/CYRIX CPU (Dual Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
PR-120 / 2.8V CLOSE 1-2 1-2 1-2 0 0 0 1 0 1 0 0
PR-133 / 2.8V CLOSE 2-3 1-2 1-2 0 0 0 1 0 1 0 0
PR-150 / 2.8V CLOSE 1-2 2-3 1-2 0 0 0 1 0 1 0 0
PR-166 / 2.8V CLOSE 1-2 1-2 2-3 0 0 0 1 0 1 0 0
PR-200 / 2.8V CLOSE 2-3 2-3 1-2 0 0 0 1 0 1 0 0
Note: JP15: ALL CLOSE
SW1 : 1-ON, 0-OFF
IBM/CYRIX M2 CPU (Dual Voltage)
-------------------------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
MX-166/ 2.9V(133MHz) CLOSE 1-2 1-2 2-3 1 0 0 1 0 1 0 0
MX-166/ 2.9V(150MHz) CLOSE 1-2 2-3 1-2 1 0 0 1 0 1 1 0
MX-200/ 2.9V(150MHz) CLOSE 2-3 2-3 1-2 1 0 0 1 0 1 0 0
MX-200/ 2.9V(166MHz) CLOSE 1-2 1-2 2-3 1 0 0 1 0 1 1 0
MX-233/ 2.9V(188MHz) CLOSE 2-3 2-3 1-2 1 0 0 1 0 1 1 0
MX-233/ 2.9V(200MHz) CLOSE 1-2 1-2 2-3 1 0 0 1 0 0 1 0
MX-266/ 2.9V(225MHz) CLOSE 2-3 2-3 1-2 1 0 0 1 0 0 1 0
MX-266/ 2.9V(233MHz) CLOSE 1-2 1-2 2-3 1 0 0 1 0 0 0 0
Note: JP15: ALL CLOSE
SW1 : 1-ON, 0-OFF
IDT-C6 CPU
---------- +-------- SW1 -------+
JP15 JP7 JP8 JP9 1 2 3 4 5 6 7 8
C6-150 OPEN 2-3 2-3 1-2 1 1 1 1 0 1 0 0
C6-183 OPEN 1-2 2-3 1-2 1 1 1 1 0 0 1 0
C6-200 OPEN 1-2 1-2 2-3 1 1 1 1 0 0 1 0
C6-225 OPEN 2-3 2-3 1-2 1 1 1 1 0 0 1 0
C6-240 OPEN 1-2 2-3 1-2 1 1 1 1 0 0 0 0
Note: JP15: ALL OPEN
SW1 : 1-ON, 0-OFF
Flash ROM Voltage Selector
==========================
JP12
1-2 5 VOLTS FLASH ROM (SST / WINBOND / Other brand)
2-3 12 VOLTS FLASH ROM (Intel / MX brand)
NOTE: Wrong Voltage jumper setting will danlage the flash ROM and
mainboard.
CMOS Charge / Discharge( Reset)
==============================
JP3
1-2 CMOS CHARGE (DEFAULT)
2-3 CMOS DISCHARGE OR RESET.
IR Jumper Setting
Page 5
=================
JP1 JP2
1-2 1-2 UART2 IS USED BY COMMUNICATION Port2 (COM2)
2-3 2-3 UART2 IS USED BY Infrared(IR) MOUDULE
MEMORY CONFIGURATION
====================
Memory supports from 4MB upto 256MB by using Standard,EDO or SDRAM.
MEMORY MODULE CONBINATIONS:
SIMM 1,2 SIMM 3,4 DIMM 1 DIMM 2)
(BANK 4,5) (BANK 3, 2) (BANK 2, 3) (BANK 0, 1)
FREE FREE NA FREE
FREE NA FREE FREE
FREE SB SB FREE
NOTE: "SB" means single bank RAM module (single side).
"DB" means double bank RAM moudule(double side).
"NA" means not accessible.
IMPORTANT: We don't recommand mixed 3V DIMM with 5V SIMM modules on the
mainboard. The 5V SIMM data will drive 5V signal to 3V DIMM data
port on the common memory data bus. It will cause 3V DIMM to
degrade. This degradation will change the CMOS properties of 3V
DIMM, and it will reduce the 3V DIMM module life cycle. If you
really want to use 5V SIMMS and 3V DIMMs togeter, please contact
your DRAM Vendor to confirm that 3V DIMMs mixed with 5V SIMMs
will not damage the 3V DIMM chips, and then you can mix 3V DIMMs
and 5V SIMMs on WIN MP080 mainboard.
MAINBOARD CONNECTORS
====================
IDE 1 & 2 HARD DISK CONNECTOR
FDC 1 FLOPPY CONNECTOR
PRN 1 PRINTER PORT CONNECTOR
COM 1 & 2 SERIAL PORT CONNECTOR
USB UNIVERSAL BUS CONNECTOR
MS1 PS/2 MOUSE CONNECTOR
MB 1 KEYBOARD CONNECTOR
IR1 INFRARED MODULE CONNECTOR
J7 SMI SWITCH CONNECTOR
J3 HARD DISK LED CONNECTOR
J6 ]KEYLOCK & POWER LED
J4 SPEAKER CONNECTOR
J2 RESET CONNECTOR
J1 SMI LED CONNECTOR
AWARD BIOS SETUP
================
Award BIOS support plug and play function and has a built-in setup program
that allows the users to modify the basic system configuration. This type of
information is stored in CMOS so that it retains the setup information when
the power is turned off.
1. Turn on or reboot the system. when the below message appears at the
bottom of the screen during the POST ( Power On Self Test ) press DEL
key to enter setup.
2. Press the DEL key to enter the Award BIOS program and the main menu
will appear on the screen. The main menu allows you to select from ten
setup functions and two exit choices.
3. For the safe, please select "LOAD SETUP DEFAULTS" for BIOS setup.
Page 6
--- end of manual ---
Loading...