Ednet Wireless Combo 2.4 GHz
Manual
86265
Read all instructions before use the product and keep this manual for future
references
How to connect it to computer
1. Remove the battery cover of the keyboard and install it with 2 pcs AAA batteries.
Put back the cover.
2. Remove the battery cover of the mouse and install it with 2 pcs AAA batteries.
Put back the cover.
3. The mouse has an ON/OFF switch located on the bottom surface.
Make sure it is in the “ON” position.
4. Take out the nano receiver from the mouse and plug it onto the USB port of
the computer.
5. The computer will then connect those devices automatically.
How to pair the keyboard and mouse manually
The mouse and keyboard are paired during production. You can also manually pair them
as per below:
1. Make sure keyboard and mouse are with battery installed
2. Plug the nano receiver into computer USB port
3. Press ESC+K on keyboard
4. The keyboard and mouse will be paired automatically.
Product Description
Connection: USB
Frequency: 2.4GHz
Number of keys: 105 normal keys + 10 multimedia keys
Distance of operation: 8-10 m
Power Source: Keyboard - 2 x AAA, Mouse - 2 x AAA (batteries not included)
Keyboard with spill proof design.
CPI: 800-1200-1600 DPI
System Requirements
Compatible with Windows XP, Vista, W7, W8, Mac OS X 10.4 or above
Technical information
Material: ABS
Net weight: Keyboard 0.435 kgs | Mouse 0.06 kgs
Product Size: Keyboard 440*123*27MM | Mouse 108*74*38MM
Voltage: 3VDC
Loading...