Virtual Reality (VR) Glasses
Manual
87000
The 3 Steps of Installation:
1. Install devices
2. Test before use
3. Enjoy the ednet VR Glasses
Package Content:
Virtual Reality (VR) Glasses x 1
Cleaning cloth x 1
Anti-scratch pad x 3
QIG (quick installation guide)
Install Devices:
A. Place your smart phone align the center of the screen in the midpoint of
the product
B. Test the device before use
C. To have the best performance, adjust pupillary distance to make your
pupils align to the glass cente
D. Adjust focal distance on the top until the device performs the best
E. The front panel is removable, after removing the front panel, camera of
smart phone is exposed.
Note:
Some Apps maybe require to calibrate your smartphone before using the
application. Therefore please scan the QR code below to calibrate your
smartphone:
Remarks:
1. Smart phone’s size should not exceed 163mmx83mm
2. There are 3 pieces of rubber pad. Please stick the rubber pads onto the
phone holder according to the position of the phone buttons, and please
refer to the pictures below.
3. Please do not use the mobile phone while charging
4. Focal length 70-75mm
5. Adjustable range between 65-75mm
6. Interpupillary distance between 58-72mm
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Loading...