Edis EA015 Manual And Installation Instructions

EA015 Active Wall Mounted Speakers

Manual and installation instructions

ACTIVE WALL MOUNTED SPEAKERS

Thank you for buying this product. We are confident it will provide you with a long reliable
service, but just in case you experience a problem, it is supplied with a 1-year return to base
warranty.

This warranty and the product to which it relates applies to the original purchaser only and is
not transferable (for the avoidance of doubt, this will be taken from the information held by the
appointed national distributor at the point of sale).

The liability of the manufacturer and its appointed service company is limited to the cost of
repair and or replacement of the faulty unit under warranty.

This warranty protects you against the following:

• Failure of any components.

• Damage when the product is first removed from its packaging if reported within 24

hours of purchase.

If you find you do have a problem with this product, you should contact the AV reseller you
purchased this product from. The original purchaser is responsible for shipment of the product
to the manufacturer's appointed service company for repair.

The manufacturer endeavours to replace the faulty parts of the product rather than replacing
the whole unit

This warranty does not protect this product against faults caused by abuse, misuse, incorrect
installation, unstable or faulty power input, which might be caused by ignoring the guidelines
set out in this guide.

WARNINGS

CAUTION: To reduce the risk of electric shock, do not remove cover (or back) there are no
user-serviceable parts inside. Please refer servicing to qualified service personnel.

Power Supply : 230 volt 50 Hz

SAFETY INSTRUCTIONS

• The product shall be connected to a power supply only of the type described.

• To reduce the risk of fire or electrical shock, do not expose this product to rain or

moisture.

• Unplug the product from the wall socket when it is not to be used for a long period of

time.

• Adequate care shall be taken so that foreign objects do not fall, or liquids are not

spilled into the enclosure through openings.

• Do not remove the cover or back, as there are no user-serviceable parts inside.

CONTENTS

1. 1x Active Speaker

2. 1x Passive Speaker

3. 4x Wall security brackets and screws

4. 1x 10 metre speaker cable to connect the Active to the Passive Speaker

5. 1x Audio input cables with RCA to 3.5 Mini Jack plug

6. 1x Audio input cable with RCA to RCA connectors

7. 1x User Guide

DESCRIPTION AND FUNCTIONS

This wall mounted speaker system is suitable for mounting either side of an Interactive
whiteboard in a classroom environment

Key Features

• 30 Watt Amplifier with two audio inputs

• The system has secure wall fixings and steel mesh grille as added protection in the

Classroom

• Inputs are included for PC and DVD or VCR

• The system is supplied with all cables and speaker connections

• Full RoHS compliance and CE approval

Benefits

• The sound output of this system is designed specifically for the Classroom – in

addition the audio quality output is enhanced by the use of modern wooden speaker
enclosures.

• The system is easy to install with key hole fixings for first fix and an individual

screwed wall fixing to secure the system from accidental abuse

• The system is supplied with cables and fixing screws

• The system is fully approved product to CE and RoHS standards and so complies

with local government and education purchasing

Basic features

The Wall mounted speaker system is supplied with wall fixing brackets, screws and cables

needed to connect the amplifier to a PC or DVD player

• The Power on/off switch is at the rear of the active speaker

• The amplifier volume control is on the wired remote control for ease of use.

Connections – Active Speaker

1. Two RCA female sockets are provided at the rear of the amplifier for PC/DVD audio
input to the amplifier

2. The 3.5mm Mini Jack female output socket on the amplifier rear panel is for
connecting the amplifier to the passive speaker

3. A 2 metre Mains power lead is fitted with a moulded plug to BS 1363.