Edirol VC-200HD, VC-300HD User Manual

NEW Version 2 Features

Supports 24p Frame Rates

Cinema frame rates like 24p and 23.98p are now supported to enable conversion of footage shot with a variety of cameras.

* Supported frame rates vary depending on Input/Output terminals. Refer to the chart on the opposite side of this document.

HDV deck

HD deck

24p source

Enables use of affordable production system and media. Use HDV shooting devices with current production systems.

Computer (NLE)

HDV camera

Improved Image Quality and Gamma Correction

4 Point Gamma Correction

The newly added 4 points Gamma Correct function enables adjustment of
bright/dark parts independently. Enhances images to have a more film-like color.

Example of Gamma Correction

Improved Image Quality

Carefully optimized algorithm of the built-in scaler has resulted in further improvements in the image quality of the VC.
Highly accurate processing is achieved in all types of conversion - up, down and cross-conversion.

Image of 4 Point
Gamma Correction on VC

Additional Functions on Outputs

SDI thru output function (*)

You can select the SDI (HD/SD) output to be pre-processor or post-processor.
This enables a monitor output or split output capability.

* VC-300HD only

SDI Input

Scaler etc.

thru

post process

SDI Output

i.LINK
Component
DVI

Copy Protection on i.LINK output

You can add CGMS-D (Copy Generation
Management System - Digital) to the output
signal. This enables limitation to copy of
digital contents.

HD deck

24p recorder

Newly Added Functions for Daily Operations

User Presets

Parameters like input signal, conversion or processing can be
saved to an internal memory. Up to 3 presets can be saved and
enables convenient recall.

Save Parameters

Open Menu to Save

Select No.

ENTER

Completed Saving

Recall Parameters

Display Preset No.

Select No.

ENTER

Completed Recalling

Remote Control

You can now remotely control parameter setup of the VC from
external devices, like a PC and over a network, via RS-422A
Remote Terminal. This can be also used for parameter data backup.

Remote Control from PC
or Touch Panel Display