Univox Digi RS-ST
Digital stationary transmitter
User guide
Part no 550020
Content
Introduction ����������������������������������������������������������������������������������������������������������������������������������������������� 2
Product overview �������������������������������������������������������������������������������������������������������������������������������������� 3
Display overview ��������������������������������������������������������������������������������������������������������������������������������������� 4
Connecting instruction ���������������������������������������������������������������������������������������������������������������������������� 5
Bluetooth connection ������������������������������������������������������������������������������������������������������������������������������ 5
Operating instruction ������������������������������������������������������������������������������������������������������������������������������ 6
Compatible receiver Digi RS ������������������������������������������������������������������������������������������������������������������ 7
Application ������������������������������������������������������������������������������������������������������������������������������������������������� 8
Troubleshooting ��������������������������������������������������������������������������������������������������������������������������������������10
Maintenance ��������������������������������������������������������������������������������������������������������������������������������������������11
Warranty ���������������������������������������������������������������������������������������������������������������������������������������������������11
Safety ��������������������������������������������������������������������������������������������������������������������������������������������������������11
Environment ��������������������������������������������������������������������������������������������������������������������������������������������11
Technical data �����������������������������������������������������������������������������������������������������������������������������������������12
Introduction
Thank you for choosing a Univox product! We hope you will be satisfied� Univox Digi RS-ST
stationary transmitter is used where you have an audio source that you want to transfer
wirelessly to receivers with headphones or neckloop�
Digi RS is suitable for a variety of applications, such as teaching, seminars, meetings,
simultaneous interpretation, product demonstrations, talks, sermons, workout etc�
The basic model for Digi RS stationary transmitter comes with frequencies 821 - 832 and
863 - 865MHz, but it is also available in other frequency ranges for use both in and out of
the EU�
2
Product overview
A Front panel
1
2
9876543
10
A1� Power button
A2� 3�5mm headphone/headset-mic jack
A3� Bluetooth button
A4� Headphone volume control
A5� Mic (Transmitter) / Feed (Interpreter O/I)
button
B Rear panel
1
2
B1� Rod antenna (TNC connector)
B2� Bluetooth sensor
A3� 6�3mm daisy chain output
B4� 6�3mm daisy chain input
B5� RCA mix output
B6� RCA aux input
4
3
A6� Mic level control
A7� OLED Display
A8� Menu / Set jog dial
A9� Aux (Transmitter) / Feed Thru (Interpreter O/I)
button
A10� Aux-in level control
11
98765
10
B7� Combo input (XLR/6�3mm)
B8� Switch setting (Line/Mic/Phantom)
B9� Uploading port (not activated)
B10� DC jack
B11� Cable clamp
3
Display overview
C Standby screen
C1� Mode
- Transmitter (default)
- Interpreter O (to work with okayo’s 10-way Language Router LR-10)
- Interpreter I
C2� RF signal power
- Low (default)
- Mid
- Hi
C3� Audio level
- Fluctuates with audio signal
C4� Aux-in level
- Low
- Hi (default)
C5� Channel lock
- Channel will be locked automatically when the transmitter is on
C6� Channel number
- Default channel is CH01� Total channel quantity varies with productversion�
Setting screen
1
2
3
4
5
6
- To enter the setting menu, press and keep pressing the jog dial (A8) when turning the
transmitter on�
- Turn the jog dial clockwise to select preferred setting and then press the jog dial
again to confirm new selection and return to setting menu�
- To exit the setting menu, select “Save and Exit” and press the jog dial again�
4