Edimax Technology Co 9520041907 User Manual
AI-2003W & AI-2004W
Quick Installation Guide
09-2019 / v1.0
Contents
I. Safety Information ...............................................3
II. Product Information .............................................4
II-1. Package Content .............................................................................. 4
II-2. LED Indicator ................................................................................... 5
II-3. Hardware Introduction .................................................................... 7
II-4. System Requirement ....................................................................... 8
II-5. Total Air Quality Solution Structure ................................................. 9
III. Installation .........................................................10
III-1. Hardware Installation .................................................................... 10
III-2. Air Circulator Setup via Bluetooth ................................................. 11
III-3. Smart App Installation ................................................................... 13
III-4. Android OS .................................................................................... 14
III-5. iOS ................................................................................................. 17
III-5. Deploying the Unit ......................................................................... 21
IV. Reset to Factory Default Settings .....................24
V. Cleaning the Unit ................................................25
V-1. Air Pump Cleaner ........................................................................... 25
V-2. Dust-off Canned Compressed Air .................................................. 26
2
I. Safety Information
For effective sensing and retrieval of environmental data, please install the
unit with the safety restrictions outlined below:
1. Must be in locations with good air circulation.
2. Must be positioned for proper air intake to achieve cross ventilation.
3. The air inlet must be kept clear and should be rechecked regularly.
4. Must be in locations close to a power supply and has good Wi-Fi internet
signal capable of connecting to the Internet 24 hours a day, 7 days a week.
5. Must not be installed in locations that are subject to extremes of humidity
or temperature such as near fire or other heat sources.
6. Must not be installed in locations directly exposed to sunlight or reflected
light source.
7. Must not be installed in corrosive environments such as in environments
with salty, acidic or basic air, or places with storage of corrosive liquids.
8. Do not inject gas, contaminants, or smoke directly into the unit, or install
the unit in a location prone to the aforementioned actions.
Unable to follow the above-mentioned guideline may reduce
machine lifetime.
You can find all supporting documents from the link below or via QR Code:
https://www.edimax.com/download
(Once you’ve visited the Edimax official website, please enter model no.
“AI-2003W or AI-2004W” into the search box to search for your product.)
3
Air Quality Detector
Power Adapter (12V/1A)
II. Product Information
The AI-2003W (7-in-1) & AI-2004W (8-in-1) Multi-Sensor Indoor Air Quality
Detector is your best air quality solution – with visible figures/display that
intuitively simplifies data reading to aid the improvement of indoor air quality
for homes, schools, healthcare institutes, smart buildings and smart city
projects.
II-1. Package Content
(AI-2003W or AI-2004W)
Device Stand Quick Installation Guide
4
LED
Color
LED
Status
Description
II-2. LED Indicator
1. LED Status
System Status
Red
Flash Waiting to be wirelessly paired
On Device is booting up
Flash Wi-Fi is operational but not connected
Green
On Wi-Fi setup successful
Blue On Device connected to the Internet
5
LED
Color
LED
Status
Description
2. LED Ring
Air quality LED and consolidated air quality LED can be turned on or off.
By default, the LED is turned on.
To turn on / off the LED, press and hold the center button for 5 seconds.
Consolidated
Air Quality &
AirBox Status
System Status LED will always be on (flashing or stayed on) when the unit
Green
Blue AirBox in default
Red Consolidated air quality: Unhealthy
On
Consolidated air quality: Good
is powered.
3. OLED Display
OLED Display shows the following info:
-CO2
-Temp.
-Humi.
-HCHO
- CO
-TVOC
-PM2.5
-PM10
6
Center Button
OLED Display
For Sensors Results
Power Jack
II-3. Hardware Introduction
1. Hardware Interface
7
CO
CO
Connector:
1. NO1 and NO2 pin for Air Circulator
○2 ○3
○1
2. A+ and B- pin for Signal Board
3. VCC pin (Voice Controlled Carrier)
* VCC (5V) controls NO1 and NO2.
* Only support 2 ports Air Circulator.
Built-in Sensor
Model
PM
2.5
PM
10
2
(NDIR)
AI-2003W
AI-2004W
v v v v v v v
v v v v v v v v
Sensors
TVOC HCHO Humidity Temperature
II-4. System Requirement
- Internet with Wi-Fi Connection (802.11n)
- Computer or mobile device with web browser
- EdiGreen Plus account: Please contact your distributor or SI, where you
purchased the device, to claim the EdiGreen Plus account “Email and
Password”.
8
II-5. Total Air Quality Solution Structure
*AI-2003W and AI-2004W only support Wi-Fi connection.
*3rd party air circulator support is for specific project only.
9
III. Installation
This section will guide you through the steps to connect your air quality
detector to the Internet.
III-1. Hardware Installation
1. Please connect the power adapter to the unit (demonstrated on the left)
and a power socket.
2. Please wait a moment for the device to boot up. Proceed to the Internet
connection procedure when the System Status LED starts flashing in Red.
10
III-2. Air Circulator Setup via Bluetooth
You can connect the air circulator to the EdiGreen Plus via Bluetooth.
NOTE: Please make sure to turn on the Bluetooth of your phone.
Device Management:
Please go to menu and tap “Device Management”.
Device management allows users to remotely configure or upgrade firmware
enrolled devices such as AirBox or Air Circulator. Please choose one of the
Airbox in the list:
11
Loading...